iATKOS | United Kingdom

macOS does not natively support NVIDIA GTX 1060 (Pascal) GPUs for hardware acceleration on macOS Mojave and later, which can cause issues with screen sharing and screen recording on platforms like OBS and Discord. This guide will show you how to get screen sharing and recording functionality working with some workarounds. Step-by-Step Guide to Enable Screen Sharing and Recording 1. Install OpenCore Legacy Patcher (OCLP) for Root Patches Since NVIDIA Web Drivers aren’t available for macOS beyond High Sierra, you can use OpenCore Legacy Patcher to help with graphics patches. Download OCLP and follow its instructions to create a patched bootloader. 2. Apply Root Patch for Graphics Acceleration (If Available) Run OpenCore Legacy Patcher and check if any Root Patches are available. If OCLP offers any patches related to graphics or framebuffer fixes, apply these patches and restart the system. Root patches may help with some screen rendering and acceleration but will not provide full GPU...

Guide Step by Step: Understanding the Issue : On your Lenovo with Ivy Bridge and GeForce GT630M + Intel HD Graphics, the video output is too large for the laptop's display but appears normal on an external TV. This suggests a resolution or scaling issue specific to the internal display. Check Your Display Settings : First, ensure that the display settings in macOS are set correctly for your laptop's screen. Go to System Preferences > Displays and check the resolution settings. It should match your laptop's native resolution. EFI Configuration Check : Since you've built an EFI that works well except for this issue, review your EFI configuration. Ensure that the correct screen resolution is set in your bootloader's configuration (like Clover or OpenCore). Graphics Configuration in config.plist : Since you're likely using the integrated GPU (Intel HD), check your config.plist for the correct settings under the Graphics section. Ensure that the ig-platform-id an...

To enable Nvidia GPU support on a Hackintosh, you need to consider the following: GPU Compatibility : MacOS has limited support for Nvidia GPUs, especially in the newer versions. If you have an Nvidia GPU from the GTX 600 or 700 series (Kepler architecture), these are natively supported up to macOS Big Sur because they support Metal. For GTX 900 and 1000 series (Maxwell and Pascal architectures), they are supported only up to macOS High Sierra (10.13) because Apple dropped support for these architectures in later versions. OpenCore Legacy Patcher (OCLP) : This is a tool used to add support for older hardware in newer versions of macOS. It can enable support for older Nvidia GPUs that were supported in past macOS versions. However, as noted in the information you provided, while OCLP can make GTX 600-700 series work with the newest macOS, the GTX 900-1000 series will have limited functionality because they lack Metal support. For GTX 16 series and newer, they are not supported and canno...

The search through the available documentation did not yield specific results regarding the exact kexts required for eGPU support in Hackintosh setups. However, based on my existing knowledge, here's a general approach to getting an eGPU to work on a laptop Hackintosh: Thunderbolt Support : Ensure your laptop's Thunderbolt port is functional in macOS. This typically requires a combination of BIOS settings and possibly patches in your config.plist. Proper Bootloader Configuration : Use the latest version of your bootloader (Clover or OpenCore) and ensure it's properly configured for your system. Kexts : The kexts required depend on the specific eGPU enclosure and graphics card you're using. Commonly required kexts for GPU support include WhateverGreen.kext and Lilu.kext. NVRAM Variables : Some eGPU setups may require setting NVRAM variables to properly initialize the eGPU at boot. Hot-Plug Support : Hot-plugging an eGPU in macOS can be hit or miss. Some setups may only w...

macOS Ventura on Ryzen 5 5600G - Wi-Fi & iGPU Guide Intermediate to Expert Level This guide will walk you through the process of installing macOS Ventura on a PC with a Ryzen 5 5600G processor, focusing on Wi-Fi and integrated GPU functionality. Prepare Your Hardware: Ensure you have a Ryzen 5 5600G CPU and a compatible motherboard. Verify your Wi-Fi adapter's compatibility with macOS. Create a macOS Ventura Installer: Use a Mac or Hackintosh to download Ventura from the App Store and create a bootable USB drive. Download Required Kexts and Patches: Gather necessary kexts (kernel extensions) for Wi-Fi and GPU support. For Wi-Fi, look for kexts compatible with your specific Wi-Fi adapter. For the iGPU, AMD kexts are essential. Configure EFI Folder: Set up your EFI folder with the required bootloader (OpenCore or Clover) and place your kexts in the appropriate directory. Configure your config.plist file for Ryzen a...

Hi guys, ​ I have been reading and scrolling and reading some more and been trying this all day. I'm hoping someone can help. I keep getting the apple no entry symbol and the support address when I try and install from my usb. I have adjusted all the config.plist and adjusted everything. I have usbmapped and all that jazz. I cannot find out what is going on. Specs: Ryzen 5800x3d - 32gb Ram - Nvidia 4700 b550 MSI MB - Will be trying to install on a partition on a 2.5 SSD. But I have never got past this stage yet. It's really frustrating. I'm not sure what info is needed, but if there is any help I would appreciate it. ​ SOLUTION: Target Audience : Intermediate to Expert users familiar with Hackintosh setup and basic troubleshooting. Step 1: Verify BIOS Settings Ensure that your BIOS settings are correctly configured for a Hackintosh installation. Key settings include: Disable CSM (Compatibility Support Module) Set SATA mode to AHCI Disable Secure Boot Step 2: Check Boo...

We've seen a lot of workaround improvement especially in the GPU workaround lately in the Hackintosh community, starting from the supported Pascal GPU >High Sierra, and many other legacy GPU under OCLP. Now workaround for AMD APU by WhateverRed, something we might say "impossible" before unless either or both party (Intel,AMD,Nvidia and Apple) added support We know that WhateverRed now support patching AMD iGPU, from what i saw is it patches AMD dGPU kext to be able to drive the iGPU(APU). Some Optimus GPU are also supported on macOS natively (such as Kepler based GPU). But just because the Optimus configuration makes them won't work..Also most macBook Pro have dual graphics too on their laptop, it's just different with Nvidia's Optimus What do u guys think? will there be any possibilities of Getting Optimus supported? By patching macOS' dual graphics configuration maybe?(i'm not a pro) P.S. other currently unsupported GPU discussion such as RTX...

Hi guys, I am building my first mackintosh with the following specs: • Mobo: Gigabyte x299 Designare Ex • CPU : intel i9 9980xe • GPU: Sapphire Nitro+ Radeon RX 5700 XT • RAM: G.Skill RipJaws 5 Series 3600MHz CL16 • Disks: 2 nvme Sabrent Rocket, 2 SSD Crucial MX500 and 1 old HDD Samsung m • Wifi/Bluetooth: Fenvi T919 I « succeed » to install Catalina with Opencore 0.6.1. I fixed the audio layout and I’m working on platform stabilization as I have issues. Known issues: -... Read more Author: Kawabaumga [► Source]

August 29, 2021: I always used the computer with bluetooth headset. Today I noticed 2 things about the audio. Quality is terrible on speaker with Audio ID 3, but is good with ID 28. However, I must reboot/sleep to switch between internal speaker or aux audio because it's like it doesn't notice i'm connecting or disconnecting a device. I also noticed I do not have Display Port Audio either. Hi, I just wanted to report that I successfully installed Big Sur on the Lenovo ThinkCentre... Read more Author: jamesst20 [► Source]

Hello, I am new to OC , used clover for lots of years , now I upgraded to this H410M-HVS mainboard,for some reason the installer (which I am finally able to see) turns in japanese or chinese and the ethernet not working to continue the instalation RealtekRTL8111.kext is there in OC/Kexts I used this EFI for the build : GitHub - Pass-Ingby/Hackintosh-EFI-Gigabyte-H410M-S2H-i5-10400-iGPU-UHD630-OpenCore-v067: Hackintosh EFI Gigabyte H410M S2H i5 10400 iGPU UHD630 OpenCore v067 Hackintosh EFI Gigabyte H410M S2H i5 10400 iGPU UHD630 OpenCore v067 - GitHub - Pass-Ingby/Hackintosh-EFI-Gigabyte-H410M-S2H-i5-10400-iGPU-UHD630-OpenCore-v067: Hackintosh EFI Gigabyte H410M S2H i5... github.com the only similar mainboard I found on the Internet, similar... Read more Author: arpecop [► Source]

Is it possible to install big sur on asus un65h? if so, what driver or kext is needed? Here are the specifications : Motherboard: ASUS UN65H VivoMini CPU: Intel Core i3-6100U @2.30GHz GPU: Intel HD Graphics 520 Audio: Intel(R) Display Audio RAM: 2x4GB Sodimm 1600 MHz DDR# HDD: HGST 500GB Ethernet: Realtek PCI GbE Family Controller WiFi: Realtek RTL8723BE Wireless LAN 802.11n PCI-E NIC Author: skuyliving [► Source]

Hello, TonyMacx86 community! I’m bringing you another budget hack project. I am currently stuck at this location: Specifications: MOBO: ASUS Z9PR-D12 CPU: 2x Xeon E5-2620 GPU: Nvidia Geforce GTX 660 Ti RAM: 24 GB ECC (bios only allows independent memory mode. My EFI is attached. Any help is greatly appreciated, Thanks so much in advance. Author: caarsonr [► Source]

Hi hackintoshers! I already own a mojave hackintosh, put togheter by my dad(fyi im 14). He put a lot of work in it and was extremely happy with it. I use it almost daily for gaming and watching youtube or netflix. I also like programming/coding a lot(which is one of the reasons for choosing hackintosh). But now i keep running into some games, or other software that want to install, but is only available for windows. So I go searching on the internet for ways to get windows runnig on my computer, dual booting with my hackintosh. Talked with my dad about it, at first he wasn't too happy to hear that i wanted "more", but that is not my point. We figured out a way on how we could do it and i want your opinion on if it is a good one. At first we would disconnect the drives with the hackintosh on it, for safety(that it surely won't get wiped) The we would get a hard disk from somewhere(probably 500gb or so). And install windows on it the regular way. That shouldn't b...

I am trying to configure Monterey to use iGPU but output signal via dGPU. Is this somehow possible ? What to google for ? My setup is asus z490-i and gtx1080 and the screen is a samsung g9. I have DP and HDMI connected to dGPU outputs. The mac boots now using hdmi (though the installation process was using DP). In the end I'd like to force DP and disable hdmi. and of course pass the signal via dGPU output. Worst case scenario is I will use second DP and connect it to mobo I enabled iGPU multi-monitor but then I could not boot anymore. submitted by /u/mightyahti [link] [comments] [► Source]

I have a strange issue with Opencore detection in BIOS. When Microsoft folder is present in EFI folder, opencore isn't detected by bios. If i rename Microsoft folder in EFI and reboot then laptop boots into opencore but opencore isn't detecting windows because i renamed the Microsoft folder. I need windows with the dgpu enabled so i would like to boot from outside opencore by pressing f12 and selecting windows. tried resetting the nvram, jumbling things around in the efi folder but no luck CPU : i5 7200U GPU : Intel HD 620, Nvidia GeForce 920MX (disabled using SSDT-dGPU-off) RAM : 8GB 2133Mhz DDR4 Laptop Model : Ideapad 320-15IKB (80XL) Audio Codec: ALC230, layout-id:20 Ethernet: Realtek RTl8111 Wifi/Bluetooth : Intel Dual Band Wireless-AC 3165 Touchpad : ELAN BIOS : 4WCN47WW OpenCore version : 0.7.5 Installed OSes : macOS 12.1 ( kernel version : 21.2.0), Windows 10 both installed on the same disk. installed windows by booting directly from usb ( without going into...

I saw that the igpu in 11th gen is unsupported, but the cpu is with a spoofed cpuid. Would it be possible to use an e-GPU to run the compatible graphics? submitted by /u/dylxnsm1th [link] [comments] [► Source]

Hardware: Self-build desktop CPU: Intel Core i9-9900K GPU: Sapphire Radion RX 580 RAM: Kingston HyperX Predator 32 GB Motherboard model: Gigabyte Z390 Designare Audio Codec: Intel Ethernet Card: Intel What guide/tool followed: Dortania I initially installed Catalina on this machine using OC 0.5.8 a year or more ago. I now want to update to Monterey. This morning I updated my OC to 0.7.6 with updated packages and a new config.plist re-created using the guide. The config passed validation and was able to boot my existing Catalina installation and the Monterey installer which I'm trying to use to install Monterey to a second hard disk. The problem is that after the first reboot during installation, I get through to the black screen with the apple logo and progress bar. It goes through to the end and says "less than a minute remaining" but it never completes. I've left it an hour (it just stayed stuck there) and also tried restarting (it did the same thing), a...

Hardware: CPU: Intel® Core™ i5-9300H GPU: Nvidia GTX 1650 Ram: upgraded to 16 GB Motherboard/Model: HP 85FC/HP Pavilion Gaming - 15-dk0263tx Audio Codec: Unsure Ethernet: Realtek Gaming GbE Family Controller Wifi /BT: Intel(R) Wireless-AC 9560 160MHz/ Intel Wireless BT Guide Followed: https://dortania.github.io/OpenCore-Install-Guide/ My hackintosh finally booted, but my HDD ( Hard Drive ) doesn't show in finder as I want to use it for saving big files from macOS like games. Anyone got any solutions? https://preview.redd.it/4vsk1hl3j3881.png?width=1364&format=png&auto=webp&s=206d47bf6811aecfa94a87fcbf506ce3d32afea1 submitted by /u/AaravBTW [link] [comments] [► Source]

Hey Guys, I need some Help I want to have a High Sierra Hackintosh (cause my GPU dont support any newer versions), made everything like the OC Guide and Stuck at "EndRandomseed" I´ve applied the Kernelstuff for my CPU but idk what I should do :/ My Specs are: Mainboard: ASUS Sabertooth 990FX CPU: AMD FX8350 GPU: MSI (Nvidia) Geforce GTX970 Gaming Edition RAM: 20GB DDR3 Storage: 480B SSD Windoows 2TB Files (Games, Onedrive and some other Stuff for Windows) 120GB SSD macOS Highsierra (if its needed 60GB SSD for stuff like Bootloader) submitted by /u/Der_Slime [link] [comments] [► Source]

First off I’m kind of a noob when it comes to building a hackintosh, so be nice lol. I’m looking to turn my old laptop into a hackintosh. I’ve not found much information on my particular model, other than a semi empty GitHub page. Mine is the IGPU model. Any help or guidance would be appreciated! Thanks submitted by /u/cward994 [link] [comments] [► Source]