iATKOS | United Kingdom

The screenshot provided from boot manager shows an option to disable the FakeSMC.kext, which is a crucial kext (kernel extension) for Hackintosh systems as it emulates the System Management Controller device found on real Mac hardware. It's unusual that your Hackintosh won't boot unless you disable this kext because macOS typically requires it to boot successfully. If your Hackintosh only boots when disabling FakeSMC.kext and you have to put Nvidia graphics to VESA mode, there could be several underlying issues. Here's a step-by-step approach to diagnosing and resolving the problem: Check for Correct Version of FakeSMC : Make sure you're using the correct version of FakeSMC.kext that is compatible with the macOS version you're running. Replace FakeSMC with VirtualSMC : Consider replacing FakeSMC.kext with VirtualSMC.kext, which is a modern alternative to FakeSMC and may offer better compatibility with newer versions of macOS. Nvidia Graphics Compatibilit...

Hi all, I am going to be upgrading my wifi card on my HP laptop which is running Big Sur but what is the best way to update my Kexts without breaking the current system. ​ I was thinking of mounting my EFI, deleting it (so that it all runs off USB), then update the Kexts on USB, swap hardware. ​ The reason why I was thinking of doing it this way is that if there are any problems I can revert back my kexts and config using another computer. If I break the system EFI then I don't know how I would get into MACOS or update it.... ​ What is the correct procedure to upgrading my hardware? submitted by /u/ceanth [link] [comments] [► Source]

First of all my specs: Motherboard: MSI A78M-E35 (Realtek ALC887) RAM: 16GB Corsair Vengeance LP (1600Mhz DDR3) CPU: AMD A10-5800K (overclocked @ 4,20Ghz) GPU: NVIDIA GeForce GT 640 SMBIOS: MacPro7,1 (Already fixed iServices) EFI: Link to Google Drive Monitors: 2x Dell P2214H (One connected over VGA, the other over a HDMI->DVI cable) I successfully installed macOS 11.2.3 on my PC. I currently have two issues: First stage of the boot logo happens on my left screen, but when the OS loads it switches to the right No sound because AppleALC is not detecting (or patching) on-board audio. The first issue is something I honestly don't care too much about, but if anyone knows how to fix its let me know. The latter is the real issue as sound is pretty important. I've tried the following: Every single layout ID. First time I tried this I didn't realise it was prioritising GPU audio to be patched. VoodooHDA. This worked great, it detected both audio devices and al...

​ Here is the verbose log, running debug version of OpenCore 0.6.7. Tried everything that I could to make this work. I've re-done the guide twice but still stuck at the same place. This is after selecting "OpenCore" from the OpenCore selector. Any help will be greatly appreciated. Laptop Model: OMEN Laptop - 15-dh1015txCPU: Intel Core i7-10750HGPU: RTX 2070 Max-Q (disabled)iGPU: Intel UHD 630RAM: 2 x 16GB DDR4 2933 SDRAMLink: https://support.hp.com/sg-en/document/c06719435 Guide followed: https://dortania.github.io/OpenCore-Install-Guide/config-laptop.plist/coffee-lake-plus.html#starting-point SSDT used: SSDT-AWAC.aml (CorpNewt helped to debug and said it was valid), SSDT-EC.aml, SSDT-HPET.aml, SSDT-PLUG.aml, SSDT-PNLF-CFL.aml, SSDT-USBX.aml, SSDT-XOSI.aml Kernel extension used:Lilu.kext, SMCProcessor.kext, VirtualSMC.kext, WhateverGreen.kext config.plist (serial wiped): https://drive.google.com/file/d/1nMXG6SjLz8V-MfFT22u8drE4_Oa-xE8k/view?usp=sharing debug l...

Currently have these 2 issues, if anyone knows how to solve any or all I'd be super grateful: • After changing the prevlang-kb to enUS it still displays in russian, I reset NVRAM to no avail • After entering macOS recovery to install macOS for the first time it says an internet connection is required even after plugging ethernet into the computer and installing necessary kexts Specs: ASUS Chromebox CN60: https://www.cnet.com/products/asus-chromebox-cn60-m020u-usff-core-i7-4600u-2-1-ghz-4-gb-ssd-16-gb/ submitted by /u/hyst3rick [link] [comments] [► Source]

... MacOS 10.14.6 - Opencore 0.6.7 - HP folio 9470m (i5-3437U) Right now, my wifi card is BCM94352HMB. Wifi/Airdrop works great. Unfortunately, I can't manage to get Handoff/Instant wifi/University Clipboard work. I am planning to switch to the BCM94360HMB for better feature. The problem is the BCM94360HMB wants 3 antennas, but my laptop only has 2 antennas. I noticed that there are 2 more antennas for the WWAN card (spare). Any change I could use the WWAN antenna as the 3rd antenna for the wifi card? See the photo below for more info 👇 Half mini PCIe BCM94352HMB (2 antennas) & 2 WWAN antennas The BCM94360HMB looks like this (3 antenna): BCM94360HMB One more question: Dortania's guide said the BCM94360HMB needs some kexts to fully working. However, this Tonymac's guide and few other people said it is natively supported in macOS. Which is correct? Did anyone manage to get Handoff/Instant wifi/University Clipboard work with on this card? https://previe...

Laptop Specs: MODEL: MSI GF63 9SC CPU: CORE I5 9300H RAM: 16GB GPU: GTX 1650(DISABLED) STORAGE: CRUCIAL BX500 480GB So I just installed catalina on my laptop and the installation went smoothly. When i first booted into macOS, I wanted to mount the EFI to my macOS drive but i couldn't find my USB storage device in finder. I plugged the usb stick into all the 3 ports and none of them seems to be working. I had the "USBinject all" kext in the kext filder of my usb install drive. Now i can't mount the EFI to my SSD since i can't find my usb drive. Anyone knows how to fix this? submitted by /u/nithin_007 [link] [comments] [► Source]

I am looking for assistance with my Vanilla Clover install of Catalina. I am able to make it 70% through the Apple logo loader screen. I end up with "AppleUSBXHCI::interruptOccurred" and "AppleBusPowerController: AppleBusPowerController::requestStaticServicePowerLocked: power supply unavailable, assuming successful power for HS08 of 500 mWWakePower and 0 mWSleepPower". Much of the text ends up garbled. I am using Clover 5122 along with Clover Configurator. The Clover folder contains: [ACPI>Patched: SSDT-EC.aml] [Drivers>UEFI>: ApfsDriverLoader.efi, AptioMemoryFix.efi, AudioDxe.efi, DataHubDxe.efi, FSInject.efi, HFSPlus.efi, PartitionDxe.efi, VBoxHfs.efi] [kexts>Other: AppleALC.kext, FakeSMC.kext, Lilu.kext, USBInjectAll.kext, WhateverGreen.kext] The system identifier is set to iMac19,1. The following are my build components: Gigabyte Z390 UD LGA 1151 Crucial Ballistix 2666 MHz DDR4 32GB Intel Core i7-9700K 9th Gen 8 Core 3.6GHz (Intel UHD Graph...

I am following the open core guide and I can't find where it says what to do with the .dysm files. For now I have them in my kexts but I can't see what to do with .dsym files. Thanks in advance submitted by /u/Watchkam [link] [comments] [► Source]

Ive tried for a solid week to find a good build and I found 1 for my hardware. Ive only done this because the school my kid goes to makes the students use iPads, and i dont know Jack about apple so I figured why not learn, right?! Plus, i hope it would provide a stable platform for my kid to learn on. Specs : Asus Maximus Hero X mobo Intel 8700k Delid @ 5ghz - stock for macOS 4x8gb Gskill Trident X XMP @ 3600mhz - See below 500 gb M.2 for windows 500 GB SamsungEvo for macOS EVGA Hybrid 1080ti (windows) currently not installed due to deep dusting/cleaning (i live in a desert , man.) I used all precompiled amls /kexts didnt make any myself because i just dont know how and it seems like something that has to be taught rather than just lightly talked about , and i never found any webpage that actually went in depth other than "open this type that download this good luck bro!!" Its a real struggle. Youre expected to know stuff or research it and figure it out. Try something dif...

Hello guys I have made a big sur usb, everything I have done patiently by reading everything on booting up the ethernet and wifi won't work How do I run my online installer? My ethernet is realtek RT8101/2/E And I find kexts of RT8111 which doesn't work on the following hardware And wifi driver of Qualcomm atheros 4965 also doesn't work Specifications Asus x541uv laptop Processor - i5-6198 skylake Ram - 4 gb Wifi driver - Qualcomm atheros 4965 Ethernet driver - Realtek RT8101/2/E Smbios - mac 9,1 Please help me I have been carefully reading everything and I have tried everything I can't get the internet to work Your help will be much appreciated Thank you submitted by /u/nischay12 [link] [comments] [► Source]

Hi I'm running a lenovo t580 hackintosh on Catalina with opencore 0.6.5, I've read that certain kexts and solutions don't work/are broken when you update to Big Sur. I want to know if its worth updating to Big Sur and going through any problems that occur as I spent a while perfecting my current build as much as possible and its been stable ever since I've installed Catalina in the first place. Sorry if this questions seems dumb as I know some documentation has been released but I know every build experiences its own issues and I wanted to ask those who have already updated. Thanks in advance! submitted by /u/patwolo [link] [comments] [► Source]

Looking to see if there is kext out for my gpu the 580 temp sensers yet? and if so where can I get them I have the HWmontior but it shows everything else but gpu. because the gpu is getting warm. and the fans are not on. and they do work because there on when i first boot up. So dont understand Thanks Author: jusromaine [► Source]

Hello everyone, After a successful install with Clover which I reported here , and subsequent switch to OpenCore which I've reported here , I recently decided to go ahead and update to Big Sur. I didn't do a full system reinstall, I just updated to latest OpenCore (0.6.7 specifically) and did a regular system update from Catalina to Big Sur. No issues to report, nothing broke after the update. Important : If you have a 4k model you were probably using Whatevergreen's -cdfon boot argument and/or enable-hdmi20 property and you'll want to switch to the new enable-max-pixel-clock-override property, because you will not be able to boot Big Sur with old -cdfon and/or enable-hdmi20 due to Lilu's userspace patching (which Whatevergreen relies on) being broken under Big Sur. Catalina is fine with either solution. ​ https://preview.redd.it/nor9ps5e6kp61.png?width=1396&format=png&auto=webp&s=1899c8f26e46a713447582f5fa0304db291a8063 My specs are the follo...

I made the binary patch for AppleAHCIPort.kext allowing hotplug for ICH10 Sata controllers. Based on SunKi approach. Find: 750C81E2BF7FFFFF Replace: EB0C81E2BF7FFFFF XML for OpenCore: <dict> <key>Base</key> <string></string> <key>Comment</key> <string>fix hotplug ICH10 for 11.0 - 11.1</string> <key>Count</key> <integer>1</integer> <key>Enabled</key> <true/>... Click to expand... Read more Author: DimaRU [► Source]

I can't download RehabMan's USBInjectAll kext. When trying to download from bitbucket it says the connection is not secure, are there any mirrors? submitted by /u/cogrearod [link] [comments] [► Source]

​ Every time I boot from the USB installer I get this panic, using Opencore 0.6.7 Big Sur MSI Z170A GAMING M5 Intel i5-7500 Killer E2400 Ethernet controller 16GB ram Below is the Pic of the panic as well as the Config.plist Any help is appreciated :) https://preview.redd.it/g33wdts62ip61.jpg?width=2048&format=pjpg&auto=webp&s=51da235e9d8e7bd641878980ff84284d4790755e <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>ACPI</key> <dict> <key>Add</key> <array> <dict> <key>Comment</key> <string>SSDT-EC-USBX.aml</string> <key>Enabled</key> <true/> <key>Path</key> <string>SSDT-EC-USBX.aml</string> </dict> <dict> <key>Comment</key> <string...

Got Catalina workin pretty great on this configuration: ​ https://preview.redd.it/sbcitwbshgp61.png?width=1920&format=png&auto=webp&s=45c0d8b00628382798f411205e9e6890da1aadc6 ​ My Specs: Motherboard : ASUS B460m-a CPU: Intel i5 10400 GPU: Intel UHD 630 RAM: 1x HyperX 8GB DDR4 2666hz SSD: Crucial BX500 500GB (SATA) Observations: Working: -USB 2.0/3.0 (Using XHCI-Unsupported kext and injecting them with Hackintool and USBInject kext) -Sleep/Wake (Had to use igfxonln = 1 in boot args) -DRM (Except in Safari 14) (Had to use device-id = 9B3E0000 under Device Properties) -iMessages and AppleID -Power Management -Internal Audio (Realtek ALC887 // Using layout-id = 5 with AppleALC kext) Issues: -Boot time kinda slow. Even after replacing O.C debug version with the Release one, and disabling verbose mode, can't get my boot times below 30/40 secs, and in some cases even more. Don't know if this are normal times related to my hardware, or some opt...

I have VoodooI2C , VoodooI2C HID, VoodooRMI kexts which is not helpful My trackpad is not working My keyboard is ps2 and it works with VoodooPS2 When I snapshot the VoodooRMI.kext it shows a message which says disable the following duplicate ....CFBuil.. Something Any help..? submitted by /u/Top-Ad-18 [link] [comments] [► Source]

Hello, I am trying to get continuity working with AirportItlwm.kext and my Intel wifi. I have tried secure boot default and x86legacy. I have tried force loading. I have tried clean tree. Nothing creates the network adapter. Any advice? Thanks! submitted by /u/ikukuru [link] [comments] [► Source]