Archive for September 2020

How to Fix Hackintosh iServices not working

By Freirburro
AMDRyzen ASUS Graphics guide hackintosh macOSSequoia OpenCore Performance
--

sequoia

How to Fix Hackintosh iServices not working

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments.

Quick Fix Steps

  1. Verify GPU support: Check if your GPU model is natively supported in your target macOS version via WhateverGreen documentation.
  2. Update kexts: Ensure Lilu and WhateverGreen are current and loaded before other GPU-related kexts.
  3. Check boot arguments: Add -v keepsyms=1 debug=0x100 for debugging, or agdpmod=pikera for modern AMD cards.
  4. Test Metal support: Open About This Mac > System Report > Graphics and confirm Metal is listed.

Verification

  • Graphics acceleration is smooth (not CPU-bound).
  • Metal is reported in System Information.
  • No GPU-related kernel panics on boot.

Related Searches

Original Question: "Hackintosh iServices not working"

I recently set up my hackintosh with Mac OS catalina 10.15.4 and everything works fine except iMessage and FaceTime. I followed the OpenCore guide and I have tried all the fixes like changing Mac serial numbers, snUUID etc. I also inserted my MAC address in my config and fixing en0. Is there any way I can get them to work?
(Ps. app store and icloud work fine but airdrop keeps crashing)

My specs are : Amd ryzen 2700
16 gb ram (3000 mhz)
Asus b450-m mobo
RX 590 gpu

submitted by /u/panosgv
[link] [comments]
[► Source]
Share:
Freirburro on 3:26:00 PM

How to Fix Can I use an SSDT USB .aml patch file from Clover in OpenCore

By Freirburro
guide hackintosh macOSCatalina OpenCore Performance USB
--

catalina

How to Fix Can I use an SSDT USB .aml patch file from Clover in OpenCore

USB issues are caused by the 15-port limit in macOS, missing USB mapping, or incorrect port configuration.

Quick Fix Steps

  1. Map your USB ports: Use USBToolBox or USBMap to identify active ports and create a custom USBMap.kext.
  2. Respect the 15-port limit: macOS only allows 15 USB ports per controller; map only the ports you actually use.
  3. Check USBInjectAll: Remove USBInjectAll after creating a proper map, as it is only for debugging.
  4. Verify USB 3.0: Ensure XHCI controllers are enabled in BIOS and USB 3.0 ports are mapped to the correct controller.

Verification

  • All needed USB ports recognise devices.
  • USB 3.0 speeds are achieved on USB 3.0 ports.
  • No kernel panics when plugging/unplugging devices.

Related Searches

Original Question: "Can I use an SSDT USB .aml patch file from Clover in OpenCore?"

I'm running a Gigabyte Aorus z390 Ultra on OpenCore 0.6.1with Catalina. I've been trying to get my head into USB mapping and have been battling along with USBmap to create a new USBports.kext but have yet to succeed. When I restart to map the second set of ports they don't appear even though NVRAM appears to be working ok.

I do however have a .aml for the USB ports from when I used Clover and Mojave. Can I use this with OpenCore and Catalina? I worked great under the old system. Don't want to reinvent the wheel if I don't have to! Thanks.

Edit: (I have read through the Clover conversion guide, but I didn't make this clear and I'm unsure where to add it in my config.plist to just try it!)

submitted by /u/graphnic123
[link] [comments]
[► Source]
Share:
Freirburro on 2:26:00 PM

How to Fix 10.15.7 update

By Freirburro
Boot guide hackintosh macOSSequoia OpenCore
--

sequoia

How to Fix 10.15.7 update

Boot failures are most commonly caused by firmware settings, incorrect OpenCore configuration, or USB mapping problems.

Quick Fix Steps

  1. Boot verbose: Add -v keepsyms=1 debug=0x100 to see where the boot process stops.
  2. Check firmware: Disable Secure Boot, Fast Boot, and CFG Lock; set SATA to AHCI; enable UEFI mode.
  3. Validate OpenCore: Run ocvalidate or ProperTree clean snapshot to catch config errors.
  4. Recreate installer: Use a fresh USB drive and try a different USB port.

Verification

  • Verbose boot passes the previous stopping point.
  • The installer sees the target disk.
  • Keyboard and mouse work during recovery.

Related Searches

Original Question: "10.15.7 update"

im using opencore 0.5.9 on a b450 motherboard, is it safe to update the new OS update 10.15.7 without the opencore crashing or even touching the EFI?

submitted by /u/Monster2600
[link] [comments]
[► Source]
Share:
Freirburro on 1:26:00 PM

How to Fix Headset microphone

By Freirburro
Audio guide hackintosh OpenCore Performance
--

opencore

How to Fix Headset microphone

Audio problems on Hackintosh systems are usually resolved by identifying the correct HDA codec and testing AppleALC layout IDs.

Quick Fix Steps

  1. Identify codec: Use Hackintool or System Information to find your exact audio codec (e.g., ALC892, ALC256).
  2. Test layout IDs: Add alcid=X to boot-args where X is a known working layout ID for your codec.
  3. Update AppleALC: Ensure the latest AppleALC kext is installed alongside Lilu.
  4. Check DeviceProperties: For complex setups, inject layout ID via DeviceProperties in config.plist.

Verification

  • Internal speakers and headphone jack produce sound.
  • HDMI/DisplayPort audio works if applicable.
  • No audio crackling or popping during playback.

Related Searches

Original Question: "Headset microphone"

I want to use the (old) Apple in ears with my Hackintosh. Or basically any headphones with an integrated mic. I‘m on a Z390 Designare and I have two separate plugs for mic input and audio output. So I got an adapter merging both into a single „4 pin“ cable but I can’t get the Microphone to work.

I don’t know what the problem is, maybe I didn’t get the config.plist or maybe this is a common issue that can be solved with different settings or third party programms.

I only know, the microphone is in fact working. How do I go about solving this?

submitted by /u/da_fabulous_dude
[link] [comments]
[► Source]
Share:
Freirburro on 1:26:00 PM

How to Fix Wierd issue re gateway dx4860 tower not seeing uefi hackintosh installer usbs

By Freirburro
Boot Dell DualBoot guide hackintosh OpenCore USB
--

opencore

How to Fix Wierd issue re gateway dx4860 tower not seeing uefi hackintosh installer usbs

Boot failures are most commonly caused by firmware settings, incorrect OpenCore configuration, or USB mapping problems.

Quick Fix Steps

  1. Boot verbose: Add -v keepsyms=1 debug=0x100 to see where the boot process stops.
  2. Check firmware: Disable Secure Boot, Fast Boot, and CFG Lock; set SATA to AHCI; enable UEFI mode.
  3. Validate OpenCore: Run ocvalidate or ProperTree clean snapshot to catch config errors.
  4. Recreate installer: Use a fresh USB drive and try a different USB port.

Verification

  • Verbose boot passes the previous stopping point.
  • The installer sees the target disk.
  • Keyboard and mouse work during recovery.

Related Searches

Original Question: "Wierd issue re gateway dx4860 tower not seeing uefi hackintosh installer usbs"

Wierd issue. Gateway dx4860 desktop tower bios boot menu can't see uefi bootable hackintosh USB drives but sees bootable windows 10 installer USB in boot menu.

Tried with olarila pre-made hackintosh installer and installer I made myself both not being found.

Keep in mind both hackintosh installer usbs are found when i go into boot mode on my Dell latitude e7250 laptop

Any suggestions

submitted by /u/Androidguy1981
[link] [comments]
[► Source]
Share:
Freirburro on 12:26:00 PM

How to Fix Hackintosh vs Mac Mini 2020 for iOS Development

By Freirburro
DualBoot Graphics guide hackintosh MacMini OpenCore
--

opencore

How to Fix Hackintosh vs Mac Mini 2020 for iOS Development

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments.

Quick Fix Steps

  1. Verify GPU support: Check if your GPU model is natively supported in your target macOS version via WhateverGreen documentation.
  2. Update kexts: Ensure Lilu and WhateverGreen are current and loaded before other GPU-related kexts.
  3. Check boot arguments: Add -v keepsyms=1 debug=0x100 for debugging, or agdpmod=pikera for modern AMD cards.
  4. Test Metal support: Open About This Mac > System Report > Graphics and confirm Metal is listed.

Verification

  • Graphics acceleration is smooth (not CPU-bound).
  • Metal is reported in System Information.
  • No GPU-related kernel panics on boot.

Related Searches

Original Question: "Hackintosh vs Mac Mini 2020 for iOS Development?"

I have been developing Android apps on my Windows i5 4th gen 8GB machine and it runs fine. Now, I am thinking to dive into iOS development. And for that I need a Mac machine.

I was thinking of going with Mac Mini 2020 i5 model but the only thing that concerns me is the lack of graphics card in it.

I have read somewhere that Hackintosh is not very reliable in terms of XCode and all. I've never used an apple product before so can't decide which one to go for.

Is a hackintosh (same price segment as mac mini) better or should I go with Mac Mini 2020 i5 for iOS dev mainly?

submitted by /u/Nested_If
[link] [comments]
[► Source]
Share:
Freirburro on 12:26:00 PM

How to Fix About SMBIOS, serial numbers and models

By Freirburro
Battery Graphics guide hackintosh HPLaptop KernelPanic OpenCore Sleep
--

opencore

How to Fix About SMBIOS, serial numbers and models

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments.

Quick Fix Steps

  1. Verify GPU support: Check if your GPU model is natively supported in your target macOS version via WhateverGreen documentation.
  2. Update kexts: Ensure Lilu and WhateverGreen are current and loaded before other GPU-related kexts.
  3. Check boot arguments: Add -v keepsyms=1 debug=0x100 for debugging, or agdpmod=pikera for modern AMD cards.
  4. Test Metal support: Open About This Mac > System Report > Graphics and confirm Metal is listed.

Verification

  • Graphics acceleration is smooth (not CPU-bound).
  • Metal is reported in System Information.
  • No GPU-related kernel panics on boot.

Related Searches

Original Question: "About SMBIOS, serial numbers and models"

As of right now I have a pretty comfortable install. MacOS itself is completely vanilla and about 70% of my work has been done in the ACPI space of my laptop where I've been creating my own SSDT's to take care of the legwork.

I'm actually working on a fork of rehabman's HP Envy patches to convert the whole process to OpenCore and to use tools and extensions that are being maintained. With this in mind, I figured I should get my shit together and ask some questions that could save me the headache later.

In the original patch, the SMBIOS used was for the MacBookPro11,1. While this was fine and all for most cases, back in 2015 I decided to become stupid as fuck and drop big cash on a CTO laptop from HP. The processor in my system is an i7-4720HQ.

Looking at the models on EveryMac I saw that the 11,1 CPU's were a little below my spec, so I decided to opt for the MacBookPro11,2 SMBIOS as the i7-4870HQ is close enough to my configuration.

But, when generating the serial info I noticed the platform key was G86R but every Mac I've found with the 4870HQ and no dGPU was G3QN. All hopped up on Adderall I managed to figure out a method to pretty much generate only valid serial numbers and after sifting through the ones with validated purchased I selected mine, got the board serial and uuidgen'd a SysUUID.

I guess my question is was all that just a waste of time? Does the serial/board serial contain any information that macOS will use to configure power management? I understand how and why you should select the right SMBIOS but I've never heard anything about matching with a specific model.

submitted by /u/-Soybrain-
[link] [comments]
[► Source]
Share:
Freirburro on 11:26:00 AM

How to Fix Z490: High Sierra installer stuck at "end randomseed"

By Freirburro
Boot Graphics guide hackintosh Intel macOSHighSierra OpenCore Performance Sleep unibeast USB
--

high_sierra

How to Fix Z490: High Sierra installer stuck at "end randomseed"

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments.

Quick Fix Steps

  1. Verify GPU support: Check if your GPU model is natively supported in your target macOS version via WhateverGreen documentation.
  2. Update kexts: Ensure Lilu and WhateverGreen are current and loaded before other GPU-related kexts.
  3. Check boot arguments: Add -v keepsyms=1 debug=0x100 for debugging, or agdpmod=pikera for modern AMD cards.
  4. Test Metal support: Open About This Mac > System Report > Graphics and confirm Metal is listed.

Verification

  • Graphics acceleration is smooth (not CPU-bound).
  • Metal is reported in System Information.
  • No GPU-related kernel panics on boot.

Related Searches

Original Question: "Z490: High Sierra installer stuck at "end randomseed""

Hello! I recently built a Z490 computer with the following specs: - Intel i7-10700 with an iGPU - MSI Z490-A PRO - 2x Corsair 8GB 3200Mhz RAM

I created the High Sierra installer with Unibeast using the guide on tonymacx86, but when booting the installer from the USB, it gets stuck at "end randomseed+++++++". When booting the same USB on a H97 computer, it works fine and the install is successful.

Things I've already tried: - Configuring BIOS according to MSI hackintosh guides online - Applying all the possible Aptio fixes separately - Applying the Free2000 fix - Shuffling RAM sticks around in the computer (Both in either As or Bs or one stick in either the first or the second slot) - The KALSR fix in the Dortania guide, got a slide value of 128, but didn't work.

I read online that this is a memory problem, but none of the proposed fixes or .efi files seem to work.

Has anyone had this problem on an MSI Z490 system, and if so, what was the fix? Any help would be greatly appreciated! Thanks

submitted by /u/eloyturner
[link] [comments]
[► Source]
Share:
Freirburro on 11:26:00 AM

How to Fix Black Macbook early 2008

By Freirburro
guide hackintosh Intel OpenCore
--

opencore

How to Fix Black Macbook early 2008

This guide provides a structured approach to troubleshoot and resolve the reported issue.

Quick Fix Steps

  1. Identify your hardware: Record the model identifier, CPU, GPU, storage type and wireless chipset.
  2. Check compatibility: Compare your hardware against current OpenCore or OCLP compatibility notes.
  3. Update core files: Refresh kexts, OpenCore and config snapshots as one controlled change.
  4. Test one feature at a time: Boot, graphics, network, sleep and apps should be verified separately.

Verification

  • The machine boots consistently.
  • The original problem can no longer be reproduced.
  • No new critical feature broke during the fix.

Related Searches

Original Question: "Black Macbook early 2008"

Is it possible to find some sort of patcher to get an early black MacBook 2008 to get el cap or something that has some application support ?

submitted by /u/Intelligent_Media_21
[link] [comments]
[► Source]
Share:
Freirburro on 11:26:00 AM

How to Fix AMD Radeon Rx 5500 XT Supported in MacOs Catalina/Bigsur

By Freirburro
AMDRyzen Graphics guide hackintosh macOSBigSur OpenCore
--

big_sur

How to Fix AMD Radeon Rx 5500 XT Supported in MacOs Catalina/Bigsur

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments.

Quick Fix Steps

  1. Verify GPU support: Check if your GPU model is natively supported in your target macOS version via WhateverGreen documentation.
  2. Update kexts: Ensure Lilu and WhateverGreen are current and loaded before other GPU-related kexts.
  3. Check boot arguments: Add -v keepsyms=1 debug=0x100 for debugging, or agdpmod=pikera for modern AMD cards.
  4. Test Metal support: Open About This Mac > System Report > Graphics and confirm Metal is listed.

Verification

  • Graphics acceleration is smooth (not CPU-bound).
  • Metal is reported in System Information.
  • No GPU-related kernel panics on boot.

Related Searches

Original Question: "AMD Radeon Rx 5500 XT Supported in MacOs Catalina/Bigsur?"

I have a hackintosh, Upgrading GPU but not sure if This Navi AMD GPU RX 5500 XT RDNA architecture supported by MacOs Catalina/Big Sur. If you have any information then consider replying.

submitted by /u/MakAnish
[link] [comments]
[► Source]
Share:
Freirburro on 10:26:00 AM

How to Fix Problem Problem in starting the installation of Catalina on Hp 15 da0xxx

By Freirburro
Boot guide hackintosh HPLaptop macOSCatalina niresh OpenCore
--

catalina

How to Fix Problem Problem in starting the installation of Catalina on Hp 15 da0xxx

Boot failures are most commonly caused by firmware settings, incorrect OpenCore configuration, or USB mapping problems.

Quick Fix Steps

  1. Boot verbose: Add -v keepsyms=1 debug=0x100 to see where the boot process stops.
  2. Check firmware: Disable Secure Boot, Fast Boot, and CFG Lock; set SATA to AHCI; enable UEFI mode.
  3. Validate OpenCore: Run ocvalidate or ProperTree clean snapshot to catch config errors.
  4. Recreate installer: Use a fresh USB drive and try a different USB port.

Verification

  • Verbose boot passes the previous stopping point.
  • The installer sees the target disk.
  • Keyboard and mouse work during recovery.

Related Searches

Original Question: "Problem Problem in starting the installation of Catalina on Hp 15 da0xxx"

Yesterday I tried to install Catalina on my HP laptop following a guide being very inexperienced in this field and when I started Boot macOS Install from Niresh-Catalina it seemed to work but when the installation had to start it turned off and restarted from the boot menu

​

I am attaching the video and the specifications of the PC

https://youtu.be/9lASRxxUAXQ

I ask you to help me because I am very clumsy and I will answer any question you want to ask me

​

(Sorry if I could have misspelled something but I'm using google translate)

submitted by /u/Ahyrix
[link] [comments]
[► Source]
Share:
Freirburro on 10:26:00 AM

How to Fix Switching from clover to open core

By Freirburro
Bluetooth Dell guide hackintosh macOSSequoia OpenCore
--

sequoia

How to Fix Switching from clover to open core

This guide provides a structured approach to troubleshoot and resolve the reported issue.

Quick Fix Steps

  1. Identify your hardware: Record the model identifier, CPU, GPU, storage type and wireless chipset.
  2. Check compatibility: Compare your hardware against current OpenCore or OCLP compatibility notes.
  3. Update core files: Refresh kexts, OpenCore and config snapshots as one controlled change.
  4. Test one feature at a time: Boot, graphics, network, sleep and apps should be verified separately.

Verification

  • The machine boots consistently.
  • The original problem can no longer be reproduced.
  • No new critical feature broke during the fix.

Related Searches

Original Question: "Switching from clover to open core"

Switching from clover to open core

Currently I am running Catalina 10.15.5 with clover on dell xps 9550 it working pretty good almost every thing is working. My main question is that which ssdt's can i use in open core ?

These are my ssdt's

submitted by /u/Zia32
[link] [comments]
[► Source]
Share:
Freirburro on 9:26:00 AM

How to Fix MacOS wont boot and the partition where it is installed can’t be seen and mounted

By Freirburro
Boot guide hackintosh OpenCore
--

opencore

How to Fix MacOS wont boot and the partition where it is installed can’t be seen and mounted

Boot failures are most commonly caused by firmware settings, incorrect OpenCore configuration, or USB mapping problems.

Quick Fix Steps

  1. Boot verbose: Add -v keepsyms=1 debug=0x100 to see where the boot process stops.
  2. Check firmware: Disable Secure Boot, Fast Boot, and CFG Lock; set SATA to AHCI; enable UEFI mode.
  3. Validate OpenCore: Run ocvalidate or ProperTree clean snapshot to catch config errors.
  4. Recreate installer: Use a fresh USB drive and try a different USB port.

Verification

  • Verbose boot passes the previous stopping point.
  • The installer sees the target disk.
  • Keyboard and mouse work during recovery.

Related Searches

Original Question: "MacOS wont boot and the partition where it is installed can’t be seen and mounted"

MacOS wont boot and the partition where it is installed can’t be seen and mounted submitted by /u/jigglyasss
[link] [comments]
[► Source]
Share:
Freirburro on 9:26:00 AM

How to Fix Cloning Hackintosh HDD and moving everything on a new drive

By Freirburro
Boot guide hackintosh OpenCore
--

opencore

How to Fix Cloning Hackintosh HDD and moving everything on a new drive

Boot failures are most commonly caused by firmware settings, incorrect OpenCore configuration, or USB mapping problems.

Quick Fix Steps

  1. Boot verbose: Add -v keepsyms=1 debug=0x100 to see where the boot process stops.
  2. Check firmware: Disable Secure Boot, Fast Boot, and CFG Lock; set SATA to AHCI; enable UEFI mode.
  3. Validate OpenCore: Run ocvalidate or ProperTree clean snapshot to catch config errors.
  4. Recreate installer: Use a fresh USB drive and try a different USB port.

Verification

  • Verbose boot passes the previous stopping point.
  • The installer sees the target disk.
  • Keyboard and mouse work during recovery.

Related Searches

Original Question: "Cloning Hackintosh HDD and moving everything on a new drive"

I need to move my entire drive on a new one, is there a way to move everything (EFI included) whiteout re-installing?

submitted by /u/cllntn
[link] [comments]
[► Source]
Share:
Freirburro on 8:26:00 AM

How to Fix Having this error while installing Catalina " Downloading installer information to the target volume failed"

By Freirburro
Boot guide hackintosh macOSCatalina OpenCore
--

catalina

How to Fix Having this error while installing Catalina " Downloading installer information to the target volume failed"

Boot failures are most commonly caused by firmware settings, incorrect OpenCore configuration, or USB mapping problems.

Quick Fix Steps

  1. Boot verbose: Add -v keepsyms=1 debug=0x100 to see where the boot process stops.
  2. Check firmware: Disable Secure Boot, Fast Boot, and CFG Lock; set SATA to AHCI; enable UEFI mode.
  3. Validate OpenCore: Run ocvalidate or ProperTree clean snapshot to catch config errors.
  4. Recreate installer: Use a fresh USB drive and try a different USB port.

Verification

  • Verbose boot passes the previous stopping point.
  • The installer sees the target disk.
  • Keyboard and mouse work during recovery.

Related Searches

Original Question: "Having this error while installing Catalina " Downloading installer information to the target volume failed""

I am attaching the installer log.

[Link removed to comply with Google AdSense and copyright guidelines]

Will appreciate any help I can get,

submitted by /u/killereliter
[link] [comments]
[► Source]
Share:
Freirburro on 7:26:00 AM

How to Handle Do I simply update

By Freirburro
guide hackintosh macOSSequoia OpenCore
--

sequoia

How to Handle Do I simply update

The best macOS version depends on your hardware age, GPU support, and daily workload requirements.

Quick Steps

  1. Match macOS to hardware: Older Macs (2011-2012) often run best on Monterey or Ventura; newer ones (2013-2017) can test Sonoma or Sequoia with OCLP.
  2. Update OCLP first: Install the latest OpenCore Legacy Patcher, build/install OpenCore, then apply root patches after macOS boots.
  3. Test your workload: Check browser, Office/Adobe apps, printing, sleep, Wi-Fi, and battery before accepting the upgrade.
  4. Keep a downgrade path: Have a USB installer for the previous stable macOS version ready.

Verification

  • The machine boots twice without manual intervention.
  • Graphics acceleration and Wi-Fi work after root patches.
  • Your essential apps launch and function correctly.

Related Searches

Original Question: "Do I simply update?"

Hey everyone,

I have a working machine running on Catalina 10.15.6.It's my first Hack. Can't seem to find how to update? Can u help a brother out? lol

Used Clover to install

​

submitted by /u/DarkniceZZ
[link] [comments]
[► Source]
Share:
Freirburro on 6:26:00 AM

How to Fix Absolutely struggling to get my iGPU/accelerated graphics going. INTEL 630 UHD - PLEASE HELP

By Freirburro
ASUS Graphics guide hackintosh Intel macOSSequoia OpenCore USB
--

sequoia

How to Fix Absolutely struggling to get my iGPU/accelerated graphics going. INTEL 630 UHD - PLEASE HELP

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments.

Quick Fix Steps

  1. Verify GPU support: Check if your GPU model is natively supported in your target macOS version via WhateverGreen documentation.
  2. Update kexts: Ensure Lilu and WhateverGreen are current and loaded before other GPU-related kexts.
  3. Check boot arguments: Add -v keepsyms=1 debug=0x100 for debugging, or agdpmod=pikera for modern AMD cards.
  4. Test Metal support: Open About This Mac > System Report > Graphics and confirm Metal is listed.

Verification

  • Graphics acceleration is smooth (not CPU-bound).
  • Metal is reported in System Information.
  • No GPU-related kernel panics on boot.

Related Searches

Original Question: "Absolutely struggling to get my iGPU/accelerated graphics going. INTEL 630 UHD - PLEASE HELP!"

Absolutely struggling to get my iGPU/accelerated graphics going. INTEL 630 UHD - PLEASE HELP!

i7-8700, ASUS B360-PRO TUF GAMING Motherboard, NVIDIA GTX 1080

Catalina 10.15.7, OpenCore 0.6.1

I currently have my Hackintosh running, however I have little glitches when I move the monitor around, as well as a black border behind the docking tray:

black box behind docking tray

My monitor is currently plugged in via DP ( DP-DP no converters )

I am TRYING to follow this guide: https://dortania.github.io/OpenCore-Install-Guide/extras/gpu-patches.html#igpu-busid-patching

How the hell do I do this? I am SUPER struggling here... I really don't understand the ports etc...

Also it says "Plug in to HDMI" so which HDMI?... my GTX1080 or my motherboard?

This whole thing is SUPER confusing... I've spent days and days to try get this to work...

Any suggestions?

submitted by /u/dualnote
[link] [comments]
[► Source]
Share:
Freirburro on 3:26:00 AM

How to Fix The laptop had a fall at work, Apple wanted me to sell my soul to fix it. Building a new work from home machine was cheaper

By Freirburro
guide hackintosh OpenCore
--

opencore

How to Fix The laptop had a fall at work, Apple wanted me to sell my soul to fix it. Building a new work from home machine was cheaper

This guide provides a structured approach to troubleshoot and resolve the reported issue.

Quick Fix Steps

  1. Identify your hardware: Record the model identifier, CPU, GPU, storage type and wireless chipset.
  2. Check compatibility: Compare your hardware against current OpenCore or OCLP compatibility notes.
  3. Update core files: Refresh kexts, OpenCore and config snapshots as one controlled change.
  4. Test one feature at a time: Boot, graphics, network, sleep and apps should be verified separately.

Verification

  • The machine boots consistently.
  • The original problem can no longer be reproduced.
  • No new critical feature broke during the fix.

Related Searches

Original Question: "The laptop had a fall at work, Apple wanted me to sell my soul to fix it. Building a new work from home machine was cheaper."

The laptop had a fall at work, Apple wanted me to sell my soul to fix it. Building a new work from home machine was cheaper. submitted by /u/Farmfreshmilk
[link] [comments]
[► Source]
Share:
Freirburro on 3:26:00 AM

How to Fix Is there a way to run a command called Bootinstall.command on windows 10

By Freirburro
Boot DualBoot guide hackintosh OpenCore
--

opencore

How to Fix Is there a way to run a command called Bootinstall.command on windows 10

Boot failures are most commonly caused by firmware settings, incorrect OpenCore configuration, or USB mapping problems.

Quick Fix Steps

  1. Boot verbose: Add -v keepsyms=1 debug=0x100 to see where the boot process stops.
  2. Check firmware: Disable Secure Boot, Fast Boot, and CFG Lock; set SATA to AHCI; enable UEFI mode.
  3. Validate OpenCore: Run ocvalidate or ProperTree clean snapshot to catch config errors.
  4. Recreate installer: Use a fresh USB drive and try a different USB port.

Verification

  • Verbose boot passes the previous stopping point.
  • The installer sees the target disk.
  • Keyboard and mouse work during recovery.

Related Searches

Original Question: "Is there a way to run a command called Bootinstall.command on windows 10?"

Is there a way to run a command called Bootinstall.command on windows 10? submitted by /u/XoneSogie720
[link] [comments]
[► Source]
Share:
Freirburro on 2:26:00 AM

How to Fix Hackintosh kernal task running high

By Freirburro
Audio Battery Bluetooth Graphics guide hackintosh Intel OpenCore Performance WiFi
--

opencore

How to Fix Hackintosh kernal task running high

Network issues on Hackintosh or unsupported Macs are typically caused by chipset incompatibility, incorrect kext pairing, or corrupted network preferences.

Quick Fix Steps

  1. Identify your network chipset: Open System Information > Wi-Fi/Bluetooth or use Hackintool to find the exact controller model.
  2. Use the correct kext: For Intel Wi-Fi use AirportItlwm, for Broadcom use BrcmPatchRAM, for Ethernet use IntelMausi or RealtekRTL8111.
  3. Reset network preferences: Delete /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist and reboot.
  4. Check privacy settings: Go to System Settings > Privacy > Location Services and ensure it is enabled.

Verification

  • Wi-Fi connects automatically after reboot.
  • Bluetooth pairs and remains connected.
  • Location Services works in Maps.

Related Searches

Original Question: "Hackintosh kernal task running high"

hi all, i paid someone to build a hackintosh for me and have had some problems since i started to use it but can't seem to get any help from the guy who built it.
Kernal Task seems to be running very high and it’s causing the PC to lag. Each time i restart the computer it seems to clear it up only to come up after 5-10mins of reopening the same apps. As you can see, the apps are not intensive and shouldn't cause any lag.
I'm also having issues with bluetooth (external dongle) where it keeps searching but not finding any devices and audio output is not detected when i plug a headphone in.
has anyone experienced similar issues or is able to help?

PC Setup

CPU - Intel i7 -10700

MOBO - MSI B460M PRO-VDH WIFI

RAM - Crucial Ballistix Sport LT 2666 MHz DDR4 8GBx2

GPU - Sapphire PULSE Radeon RX 570, 8GB

PSU - SilverStone 650W Essential Power Supply

SSD - Samsung 860 EVO 250GB M.2 SATA SSD

submitted by /u/fabiankwok
[link] [comments]
[► Source]
Share:
Freirburro on 2:26:00 AM

How to Fix Hackintosh-ing for the first time:Catalina on Thinkpad T480s

By Freirburro
guide hackintosh KernelPanic Lenovo macOSCatalina OpenCore WiFi
--

catalina

How to Fix Hackintosh-ing for the first time:Catalina on Thinkpad T480s

Network issues on Hackintosh or unsupported Macs are typically caused by chipset incompatibility, incorrect kext pairing, or corrupted network preferences.

Quick Fix Steps

  1. Identify your network chipset: Open System Information > Wi-Fi/Bluetooth or use Hackintool to find the exact controller model.
  2. Use the correct kext: For Intel Wi-Fi use AirportItlwm, for Broadcom use BrcmPatchRAM, for Ethernet use IntelMausi or RealtekRTL8111.
  3. Reset network preferences: Delete /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist and reboot.
  4. Check privacy settings: Go to System Settings > Privacy > Location Services and ensure it is enabled.

Verification

  • Wi-Fi connects automatically after reboot.
  • Bluetooth pairs and remains connected.
  • Location Services works in Maps.

Related Searches

Original Question: "Hackintosh-ing for the first time:Catalina on Thinkpad T480s"

Hi everyone!

I am buying a Thinkpad t480s and want to try hackintoshing it, I was sick of the inability to recover data from my laptop after I spilled water in it, good thing I had a NAS backup.

What works? Where do I start? Which WiFi card should I get? Will future updates ruin the install?

Thanks in advance!

submitted by /u/myspaghetti123
[link] [comments]
[► Source]
Share:
Freirburro on 1:26:00 AM

How to Fix , none of the fixes work

By Freirburro
Battery Boot Graphics guide hackintosh HPLaptop Intel macOSSequoia OpenCore Performance USB
--

sequoia

How to Fix , none of the fixes work

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments.

Quick Fix Steps

  1. Verify GPU support: Check if your GPU model is natively supported in your target macOS version via WhateverGreen documentation.
  2. Update kexts: Ensure Lilu and WhateverGreen are current and loaded before other GPU-related kexts.
  3. Check boot arguments: Add -v keepsyms=1 debug=0x100 for debugging, or agdpmod=pikera for modern AMD cards.
  4. Test Metal support: Open About This Mac > System Report > Graphics and confirm Metal is listed.

Verification

  • Graphics acceleration is smooth (not CPU-bound).
  • Metal is reported in System Information.
  • No GPU-related kernel panics on boot.

Related Searches

Original Question: "[EB|#LOG:EXITBS:START], none of the fixes work"

Installer keeps crashing/restarting with 2 minutes left. Attempting to install on a spinning HDD in APFS format (whole drive formatted not just a partition).

OpenCore 0.6.1, Intel Core i5-4310U with Intel HD Graphics 4400 (Haswell), HP Elitebook Folio 9480m (BIOS M85 VER 01.50)

Mac OS X Catalina 10.15.6 (19G2021) (latest build), created the USB with createinstallmedia (on a Mac) and MakeInstall.bat (on a PC) as per the guide.

Tried the troubleshootings in the guide, still nothing. Tried changing SMBIOS, using different USB ports, removing RAM, different drives/SSD, removing SMCBatteryManager.kext. All same result, nothing.

Ran the debug version of OpenCore to get these logs:

Log pre-fixes | Log post-fixes

[Link removed to comply with Google AdSense and copyright guidelines] | [Link removed to comply with Google AdSense and copyright guidelines] | Pic of EFI I also have SSDT-HPET.aml

submitted by /u/--royalty
[link] [comments]
[► Source]
Share:
Freirburro on 1:26:00 AM

How to Pin a Conversation in Messages Using Your iPhone [Video]

By Freirburro
elcapitan guide hackintosh
--


These are instructions on how to pin a conversation in Messages using your iPhone. You'll need iOS 14 or higher to follow these steps.







Spotlight Deal:
New iPad Pros Drop to All-Time Low Prices [Deal]

Share Article:
Facebook,  Twitter,  LinkedIn,  Email,  Reddit,  Digg,  Delicious,  StumbleUpon

Follow iClarified:
Facebook,  Twitter,  LinkedIn,  Newsletter,  App Store,  YouTube

[► Source]
Share:
Freirburro on 12:12:00 AM