iATKOS | United Kingdom

Getting "Internet Connection Required" at the Catalina install screen. LAN is working, using it right now from windows. Correct kext for mobo - installed Opencore successfully before. I toggled a mobo setting with the 4g decoding and that disabled my LAN even on windows so I had to switch that back to "disabled" in mobo and add the npci=0x2000 boot arg to the plist for Opencore. I read somewhere here to change the plist of the network kext to "Boot" instead of "Network-Boot" and its still saying internet connection required. Anyone know what I can do to get this to work? Thanks! submitted by /u/djoe_dev [link] [comments] [► Source]

I have this odd issue where audio over hdmi won't work until I replug the hdmi cable. Then an extra section called IOHDACodecDevice shows up in ioreg under HDEF. With FakePCIID installed, without any helper kexts it works without re-plugging. So I thought to be smart and set the device id that it fakes in the OpenCore config. Added the device id to the correct section in the config and it does set the new device id properly, just like FakePCIID does, but audio over hdmi still doesn't work and re-plugging also stops working. Replugging works fine when I only define the alc layout. So I either have to use this old kext or re-plug the cable. There must be a better way to do this. But I don't know what FakePCIID does exactly. It does more than changing the device id for sure. Else setting the device id in the OpenCore config would've worked right? tl;dr How can I replicate what FakePCIID does in the OpenCore config so I can ditch this kext? submitted by /u/Specif...

Hi everyone, ​ Hoping for some help when its comes to having poor Bluetooth range when using the BCM94360NG card on my build: ​ CPU: AMD Ryzen 7 3700X 8-Core GPU: Gigabyte Radeon RX 5700 XT RAM: Corsair Vengeance RGB Pro 32GB DDR4 3200 Motherboard: Gigabyte X570 I AORUS Pro Wi-Fi Storage: M.2 Samsung 970 EVO SSD 500GB (x2). One for Windows and one for macOS. Audio Codec: Not sure where to locate. Ethernet Card: Not sure where to locate. Wifi/BT Card: M.2 BCM94360NG BIOS Revision: F20 OpenCore 0.6.1 (Release) Here are my Kexts (incase it's related): https://imgur.com/9Z9XDLp I replaced the card that came installed in the Gigabyte X570 I with the M.2 BCM94360NG card that's supported out of the box. I did a little bit of research here and Google'ing the issue but I seem to be experiencing something unique — my build sees and connects to Bluetooth devices, however, they need to be really close to the antenna. I had read that the 'shark fin' antenna tha...

Hello everyone. I created a USB installer using dortania vanilla guide and I get stuck at this error. I even tried one efi from one guy that have almost the same setup like me except for gpu (he have rx 5700 and I have the xt variant) My build : ryzen 5 3600 2x8 gb ram Sapphire nitro+ rx5700xt Gigabyte x570 aorus elite submitted by /u/Dannii1998 [link] [comments] [► Source]

Hi all, My hack has been running stable (kinda) for a while and now I would like to enable the integrated GPU for HEVC decoding and stuff. But it doesn't work, if I have it then Recovery and installer won't boot at all (see photo attached). Sometimes the actual macOS will boot, but then my thunderbolt card stops working. I have a AKiTiO HDD box attached, the system can sometimes see the disks but it won't mount and after a while it disappears. And after a reboot it also fails to boot. I'm using the latest Clover release and MacPro7,1 SMBOIS, if needed I'll attach my EFI folder. Thanks for any help. ​ https://preview.redd.it/j5qzba8y0zp51.jpg?width=4032&format=pjpg&auto=webp&s=b506e7e6042ffddd59c5b83cc7836427d4f55319 submitted by /u/i0ntempest [link] [comments] [► Source]

I'm following https://dortania.github.io/OpenCore-Install-Guide/ktext.html#firmware-drivers to place drivers into the BOOT usb. Is there an easier way? Such as a set of drivers that work most of the times just to get started? I just need wifi. Everyhing else is optional. Can I just place all drivers in that list and let the installation figure it out? When I first tried Hackintosh years ago via multibeast, I don't remember it was as complicated. I have i5 third gen laptop, i3 6th laptop, and a A6 5400k desktop. Getting a set of drivers for any of these three would be great submitted by /u/ChineseOnion [link] [comments] [► Source]

I am thinking to build a Gaming/Video editing Hackintosh pc. I will be gaming in windows and video editing in macOS. I am thinking to buy Gigabyte z370m, i3 9100f, 16gb ddr4 ram, and an amd rx 580 8gb. So is it a good build and will this GPU have any problem with premiere pro and fcpx hardware acceleration? In the GitHub guide the z370 does not have NVRAM so is it important to emulate NVRAM? submitted by /u/Zia32 [link] [comments] [► Source]

First question is there difference between how u hack 9 and 10 gen intel? if no so here config I want to build but not sure with motherboards because I want thunderbolt 3 support so if you can let me know which mobos support this and which not. Maybe suggest some under 120 usd! so I have few options: 1) Core i5 9400F/9400 Gigabyte Z390 GAMING X/MSI Z370-A PRO 1151v2/MSI B360M BAZOOKA mATX/MSI MPG Z390 GAMING EDGE AC /Gigabyte B360 aorus gaming/ Asus Prime Z390m plus 2) Core i5 10400/10100 Z490 Gigabyte UD/GA-Z490 GAMING X/ASRock H470 Phantom Gaming 4/Gigabyte H470 HD3/PRIME H470-PLUS/MAG B460 TOMAHAWK/ROG STRIX B460-H GAMING/Z490 Phantom Gaming 4/Gigabyte Z490 UD/ROG STRIX B460-G GAMING ​ Radeon 560 SSD 500Gb Crucial P1 NVMe M.2 / SSD 500Gb Samsung 860 EVO Series SATA3 M. submitted by /u/cocojumbo777 [link] [comments] [► Source]

Has anyone got their Killer E2600 ethernet to work? if so please share which kext you used, I have an Alienware R9 and I finally got to the installer only to find my internet doesn't work submitted by /u/zayn008 [link] [comments] [► Source]

osxlatitude says its an unworthy hackintosh but they didn't say it's impossible? or is it?. submitted by /u/tiltedtowersboi [link] [comments] [► Source]

Is it possible to install mac os on my 3200g(no dedicated gpu). Mobo: gigabyte a320 submitted by /u/00Turag [link] [comments] [► Source]

hi everyone, I just successfully installed Catalina 10.15.6 w/ open core 0.6.1. i had another SSD with pre installed win 10. the problem is if I plug in both mac SSD and win 10 SSD. I'm unable to see windows 10 SSD drive in the boot option list. but when I logged in to mac os, I'm able to see Win 10 SSD in disk utility. and if I unplugged mac os SSD, win 10 SSD will show in boot option list and I'm able to boot into Win 10. please help me! I don't want to keep unplugging drives when switching OS ​ my PC Spec as follow: CPU: i7 6700 MOBO: Gigabyte H110M-DS2 Ram : 8 gb VGA : XFX RX 470 4gb Drives : SSD sandisk (Catalina) & SSD Samsung EVO (win 10) submitted by /u/Richeetlibre [link] [comments] [► Source]

As a daily driver? Im not using my hack for audio visual creation, it's used as my main workstation as a systems engineer in a support role with some coding submitted by /u/ithakaa [link] [comments] [► Source]

submitted by /u/Bravo2genen2 [link] [comments] [► Source]

submitted by /u/phate06 [link] [comments] [► Source]

I managed to boot the laptop to the installer but the disks is not getting detected for the intstallation both sata ssd and hdd ,but it detects external disks ,My bios doesnt have any disk mode changing options any help appreciated ! submitted by /u/esashwin [link] [comments] [► Source]

So my sister wanted to try out macOS because she is planning to buy a Mac after a year so she wanted to get used to macOS that's why I'm installing it but she also wants to keep windows and its data so I have seen some videos from YouTube and from what I've seen clover is the only thing that the YouTube people used but it is a boot loader and my sister's laptop is a 3000$ laptop so I'm scared if anything happens to it (It is an hp laptop from 2018) it uses "hp sure start" I don't know if that is important but I'm just putting it out there Thank you for the help Sorry if the grammar is bad English is not my first language and sorry if you feel that this post is very dumb, I'm not that experienced with technology submitted by /u/acegaurav123 [link] [comments] [► Source]

Issue: When trying to install from a freshly made USB stick, after the verbose debug messages it seems to reach the installer, however graphics make it impossible to see anything (see attached images for what I mean). I have a mouse cursor available, it seems to be able to select things, however it's completely unusable this way. Hardware: Motherboard Gigabyte Aorus Master X570 CPU Ryzen 9 3900X GPU Sapphire Nitro+ 5700 XT Storage M.2 Sabrent Rocket 500GB Install Method OpenCore 0.6.1 OC directory of EFI: Download ACPI DSDT.aml SSDT-EC.aml SSDT-USBX.aml Drivers HfsPlus.efi OpenRuntime.efi Kexts AppleMCEReporterDisabler.kext Lilu.kext NVMeFix.kext RealtekRTL8111.kext SmallTreeIntel82576.kext VirtualSMC.kext VoodooHDA.kext WhateverGreen.kext Tools OpenShell.efi OpenCore.efi config.plist I'm very grateful for any help pointing me into the right direction here as I'm obviously doing something wrong. ​ https://previ...

Hackintosh doesn’t recognize my VRS8 thunderbolt audio interface * CPU: I7 10700 * GPU: Gigabyte Rx 570 * RAM: 16GB Thermaltake * Motherboard: Gigabyte z490 Vision D What guide/tool followed: ( https://www.tonymacx86.com/threads/gigabyte-z490-vision-d-thunderbolt-3-i5-10400-amd-rx-580.298642/ ) Hi, i follow the guide mentioned and successfully installed Catalina on my hack with all the important features working, the only issue is it doesn't recognize my thunderbolt 2 audio interface (Slate Digital VRS8). *Before this, I was using the previous version of the z490, the z390 with an I7 8700 and clover. With some tweaks performed by others users I manage to get the vrs8 to work. Since opencore is very different from clover, I would appreciate if you could help me get it working. Let me know if you need additional information, any kind of help will be very appreciated. submitted by /u/fabrizzioa04 [link] [comments] [► Source]

I’ve followed the guide on Duet’s website and double checked everything. ( https://www.duetdisplay.com/help-center/can-i-use-duet-as-the-only-display-for-my-mac ) However, I get a black screen on the iPad after boot. This is only resolved by plugging in the HDMI cable at which point both the HDMI monitor and my iPad immediately start working. Yes, I have an active subscription for DuetDisplay. I need this so I can take my NUC with me on a moderate-trip while keeping the monitor at home. I really don’t know what WhateverGreen does, but it appears to be the source of the issue given my limited understanding. Not 100% sure though, otherwise I’d be on their github page. My specs: Intel NUC 7i7BNH w/ Samsung Evo 860 1 TB, and Kingston ValueRAM 2x 8 GB. Kexts: AppleALC, FakePCIID_Intel_HDMI_Audio, FakePCIID, IntelBluetoothFirmware, IntelBluetoothInjector, IntelMausi, ITLWM v1.0.0, Lilu, Sinetek-rtsx, SMCProcessor, SMCSuperIO, USBInjectAll, VirtualSMC, WhateverGreen. If anyone has ha...

Oldest drives works with the futur macOS ?! submitted by /u/BK3Y [link] [comments] [► Source]

https://pastebin.com/fCh3HCUu ---------- My pc specs ​ Will i be able to run mac os mojave on this. submitted by /u/mowYT [link] [comments] [► Source]

submitted by /u/Blaggah [link] [comments] [► Source]

I went through a couple of posts here and other hackintosh forums and right now, it seems that remote dual boot is not possible. I had a weird idea. Would it be possible to control that boot process through an arduino or raspberry pi controller that can pass keyboard input to the system? I'm not sure how I'd even begin but it's just a thought. What do you guys think? submitted by /u/MMPerson [link] [comments] [► Source]

Hi, I am total beginner with hackintosh, but I couldn`t find the solution anywhere. My machine is Thinkpad T480S, i7 8550U version. For my EFI, I am using edited verstion (to make intel wifi work) of this file from GitHub : https://github.com/mohamedspicer/hackintosh-T480s My EFI: https://drive.google.com/file/d/1wKDT7To7WYcAaTPjQYdKG5bMq_IZumeF/view?usp=sharing ​ I know that it`s a i5 version, but I am honestly glad that it just works. ​ My problem: When I try to launch "bluetooth", I get this message : " You can’t open the “Bluetooth” preferences pane because it is not available to you at this time." Bluetooth seems to be disabled somewhere in ACPI level, but I dont have enough knowledge to edit them. I have bluetooth enabled in bios, so the problem is not there. ​ Thank you very much for your responses! submitted by /u/42R0N [link] [comments] [► Source]

I'm working on a Powermac G5 project and I'd like to know if there are any regular PSU that will fit within the clearance of either at the top of the case (~3.5in) or at the bottom where the original one comes in (~2in?). I wouldn't want to mess with an ATX to G5 PSU conversion. Or cut the top shelf. Thanks! submitted by /u/alfierobles [link] [comments] [► Source]

hey! so I recently got into building a hackintosh, and I ran into a problem whenever I try and run the Nvidia web driver INSTALLER I get this error https://cdn.discordapp.com/attachments/755190508665569392/759967871378915358/Screen_Shot_2020-09-27_at_7.40.06_PM.png (I put the "about this Mac" thing beside it to show that its the right version) what do I do? I've never done this before and I'm so confused submitted by /u/vie76 [link] [comments] [► Source]

CPU: i5-9600k GPU: GTX 1080 installed, but using Intel UHD630 RAM: 16GB Motherboard/Laptop model: AsRock Z390 Phantom Gaming-ITX/ac Audio Codec: Realtek Ethernet Card: I219-V Wifi/BT Card: Intel 9560, planning on using ethernet so not too important What guide/tool followed: https://dortania.github.io/OpenCore-Install-Guide/ What part I got an issue with: I'm running a dual monitor setup and one of my monitors doesn't seem to turn on when booting into the OS. However, when unplugging the HDMI cable and replugging it, the monitor connects successfully. Both my cables (1 DP, 1 HDMI) are plugged into the motherboard and using the iGPU rather than the dGPU. DP connects automatically on startup, HDMI is the one with issues. submitted by /u/Pikachuwee [link] [comments] [► Source]

submitted by /u/XoneSogie720 [link] [comments] [► Source]

I'm a complete noob at this and I'm trying to make a Mac OS X Leopard VM on a Windows 10 host using VirtualBox. I've scoured every corner and the web and only found terribly outdated guides. Any help would be greatly appreciated. TIA submitted by /u/CheekiBreeki95 [link] [comments] [► Source]

Hardware: CPU: Intel(R) Core(TM) i5-7300HQ CPU @ 2.50GHz(4CPUs) GPU: Intel HD Graphics 630 + NVIDIA GeForce GTX 1050 (Memory Shared system memory 4 GB) RAM: 8GB DDR4 Motherboard/Laptop model: Dell Inspiron 5577 (15 5000 Gaming) Screen(s) Number: 1 Screen(s) Resolution: 1920 x 1080 Ethernet Card: Realtek PCIe GbE Family Controller Wifi/BT Card(if available): Intel(r) Dual Band Wireless-AC 3165 What guide/tool I followed: https://dortania.github.io/OpenCore-Install-Guide/ What part I got an issue with: Installing MacOS: https://imgur.com/a/jqdeHKQ Issue: Not able to get ethernet working for installing Catalina. Tried changing kexts. Tried Changing "Network-Root" to "Root", but was not able to pin point the exact issue. What files/config I am using: File Structure and files: https://imgur.com/a/3xQKhZi Kexts Used: https://imgur.com/a/zMnVppW Config: https://pastebin.com/1SpJmqvi submitted by /u/UltraxDrago [link] [comments] [► Source]

I've been trying to install catalina on my ryzen 7 2700 and gtx 1060 but whenever I click external macos base system i get this https://imgur.com/a/QLXrnZZ , I downloaded someone else config https://github.com/alkalim/ryzen-catalina#introduction , would that be the issue? submitted by /u/CronkBronk [link] [comments] [► Source]

Hi everyone. I'm currently running a 4790k with a Vega 56, and I am planning on upgrading my CPU. I was looking at the 3900x and 10900k. How's the current state of hackintosh on ryzen? I've heard that it's much easier and less buggy than in the FX processor times. Is it worth spending more to get the Intel variant? I have only read about complaints with Adobe software, which I never use, I just use macOS for programming and stuff like that, also I have quite some experience with setting macOS up, i wouldn't mind reading through docs and configuring stuff, as long as the end result is stable. I don't use windows for gaming that often. If anyone can provide some insight I would greatly appreciate it. submitted by /u/XyZaaH [link] [comments] [► Source]

submitted by /u/dualnote [link] [comments] [► Source]

So, I'm planning to buy a new laptop, and I've came across this one: https://amzn.to/30bxukN (I couldn't find any english page for it, so I'm gonna write the specs down here). Is this gonna be a decent hackintosh? I've never actually done a full functional hackintosh, so this would be my first one. I'd like to do it more for fun than for actual usage, but the more stuff works the better. ​ Here all the specs that i could find: Laptop model: Acer Aspire 3 A315-54-33SG CPU: Intel Core i3-10110U RAM: 8GB DDR4 SSD: 256GB NVME (also, since this laptop only got one ssd, would this be a problem considering i'd like to also keep windows) iGPU: Intel® UHD Graphics for 10th Gen Intel® Processors (this is what intel says on the official page for this CPU, doesn't seem like a decent name for a iGPU ngl) submitted by /u/Cikappa2904 [link] [comments] [► Source]

I successfully switched to OC from Clover (which I don't really understand what the benefits are) with a working Catalina. My problem is that windows doesn't boot. I can boot Windows just fine if I press F11 while booting and select windows over OC, but if I select windows FROM OC, the little circle spins half way and it freezes. ​ As always, any and all help is greatly appreciated! submitted by /u/RottingEgo [link] [comments] [► Source]

I change the original wirless card (killer 1650) with broadcom dw1560, incatalina work well, but in windows i cant find the driver and don't work out of the box, someone who have the same card can help me, where i can find the driver for this model, i try driver from different model but i can't finish the installation, thank for the help submitted by /u/AdBeneficial8920 [link] [comments] [► Source]

Hi, I have a MacBook air, it's getting old and with only 4gb Ram and a 13 inch screen (yeah I will go for an external monitor but still), I want a laptop with better specs but newer MacBooks are not affordable for me. What second hand laptop should I look for to acquire? (specs? brands?). I want to go for a big screen, well built laptop and low price, I never did anything like this Hackintosh but I guess all the info is on the internet and if i take my time I will get there in the end :) submitted by /u/Pierrlebe [link] [comments] [► Source]

Can anyone help me? I tried so many things, but still stuck here [EB|#LOG:EXITBS:START] 2020-09-27T11:56:23 I tried this https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/troubleshooting.html#stuck-on-eb-log-exitbs-start but this to not fix my problem ​ Intel Core i5-1035G1 Opencore 0.6.1 ​ Config: https://drive.google.com/file/d/1fACz4wM7mTyhNJl1xHx9AI-lkxQlqLpn/view?usp=sharing Logs: https://drive.google.com/file/d/18B7ah5erIpda9xcOKx2Ihh5qCic2ugWb/view?usp=sharing https://preview.redd.it/wgekiliirnp51.jpg?width=1600&format=pjpg&auto=webp&s=da6d80cff14db741868d13710e0c439927215c26 submitted by /u/FidoDestroyer [link] [comments] [► Source]

So this is a hard combination, I'd like to create a proper virtual hackintosh using OpenCore, VMware Workstation and AMD hardware. Before, I've successfully ran Macos on the same hardware in VMware using prelinked kernels, but they don't support (even the minor) updates which I need. My main purpose for the hackintosh is using XCode, which only runs on the latest version. What I've done: Create a bootable USB using gibMacOS Created a config.plist file to my best knowledge Using ACPI: SSDT-EC0 SSDT-EC-USBX-DESKTOP Using kext: AppleMCEReporterDisabler.kext Lilu.kext VirtualSMC.kext Using drivers: AudioDxe HFSPlus OpenRuntime Patches from AMD_Vanilla repository, the OpenCore ones for 17h. SMBIOS (iMacPro1,1) is being patched using VMware vmx config, generated by GenSMBIOS What happens: Everything goes through, but eventually hangs on the LOG:EXITBS:START message. I've tried all suggestions in the troubleshooting section of OpenCore, no luck....

Hello all, Currently I have below specs: Intel i5 7500 CPU Gigabyte Radeon RX 590 8GB GPU DDR4 32GB RAM 240GB SSD Gigabyte B250M DS3H But I'm getting CPU bottleneck, because my CPU is outdated according to CPU. (I'm not so expert in it, just read on internet) ​ So now I'm thinking to upgrade my system and want to reuse below components: Gigabyte Radeon RX 590 8GB GPU DDR4 32GB RAM 240GB SSD So which CPU and Motherboard should I choose so that I can enjoy seamless video editing, design, coding. (Gaming in windows) ​ Thanks regards. submitted by /u/prolongservices [link] [comments] [► Source]

​ https://preview.redd.it/y61sleft2np51.png?width=1920&format=png&auto=webp&s=b3b036d6b07f0e6adffd7147026661ce5007f6ed CPU: AMD Ryzen 5 2600 GPU: Radeon RX 580 8 GB RAM: 16GB G.Skill RipJaws 4 Motherboard/Laptop model: MSI X370 GAMING PLUS Audio Codec: Realtek® ALC892 Codec Ethernet Card: Realtek® 8111H Gigabit LAN controller What guide/tool followed: https://dortania.github.io/OpenCore-Install-Guide/prerequisites.html | https://dortania.github.io/OpenCore-Install-Guide/extras/big-sur/ submitted by /u/k1nxz [link] [comments] [► Source]