Archive for October 2020

How about automatic updates — macOS Version Selection Guide

By Freirburro
guide hackintosh OpenCore
--

opencore

The best macOS version depends on your hardware age, GPU support, and daily workload requirements.

Step 1 — Match macOS to Your Hardware

Newer Intel hardware (8th gen and later) generally works best with the latest macOS. Older hardware may benefit from OpenCore Legacy Patcher.

Step 2 — Check GPU Support

AMD Radeon RX 400/500/5000 series are supported natively. NVIDIA cards are limited to High Sierra and earlier.

Step 3 — Update Before You Upgrade

Update OpenCore, kexts, and config.plist before attempting a macOS upgrade.

Step 4 — Test Your Essential Apps

Verify that your critical applications all launch and function correctly after upgrading.

Expected Results

  • The system boots consistently after upgrade
  • Graphics acceleration and Wi-Fi work
  • All essential applications function correctly

Related Searches

Original Question: "How about automatic updates ?"

Hello everybody, I was thinking to create a desktop PC - hackintosh. I was wondering how it looks like when we come to automatic updates ? Is it possible ? or we need to do it other way manual ? What about with new system release update ? Can somebody explain how You deal with it ? and how complicated it is ?

submitted by /u/pl4y3r2nd
[link] [comments]
[► Source]
Share:
Freirburro on 1:26:00 PM

Graphics Acceleration Fix for Hackintosh: R9 370 OC

By Freirburro
Graphics guide hackintosh HPLaptop macOSCatalina OpenCore
--

catalina

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments. Below is a systematic approach to diagnosing and fixing them.

Step 1 — Verify GPU Compatibility

Check if your GPU model is natively supported in your target macOS version. AMD Radeon RX 400/500/5000 series generally work natively. NVIDIA support ended at High Sierra for most cards.

Step 2 — Update Essential Kexts

Ensure Lilu and WhateverGreen are installed and current.

Step 3 — Configure Boot Arguments

Add -v keepsyms=1 debug=0x100 for debugging. For AMD cards add agdpmod=pikera.

Step 4 — Confirm Metal Support

Open About This Mac > System Report > Graphics/Displays. Metal support should be listed.

Expected Results

  • Graphics acceleration is smooth
  • Correct resolution on all displays
  • No GPU-related kernel panics

Related Searches

Original Question: "R9 370 OC"

I need to accelerate a gpu R9 370 in OC Catalina ? I try everything but my graphic card stay with 7 mb

submitted by /u/Minute_Chipmunk8206
[link] [comments]
[► Source]
Share:
Freirburro on 1:26:00 PM

Hackintosh Network Fix: How to install a Wifi/Bluetooth card (BCM943602CS)

By Freirburro
ASUS Bluetooth guide hackintosh OpenCore Performance WiFi
--

opencore

Network connectivity is one of the most common challenges when setting up a Hackintosh. Below is a practical walkthrough covering the most common fixes.

Step 1 — Identify Your Network Chipset

Open System Information > Wi-Fi (or Bluetooth) or use Hackintool to find the exact controller model.

Step 2 — Install the Correct Kext

For Intel Wi-Fi use AirportItlwm, for Broadcom use BrcmPatchRAM, and for Ethernet use IntelMausi or RealtekRTL8111.

Step 3 — Reset Network Preferences

If Wi-Fi connects but has no internet, delete the network preference files and reboot.

Step 4 — Verify Location Services

Go to System Settings > Privacy & Security > Location Services and ensure it is enabled.

Expected Results

  • Wi-Fi connects automatically after reboot
  • Bluetooth pairs and remains connected
  • Location Services works in Maps and other apps

Related Searches

Original Question: "How to install a Wifi/Bluetooth card (BCM943602CS)?"

I just achieved my first Hackintosh installation and it works pretty well, except my Wifi/Bluetooth card which is not recognised.

I bought a BCM943602CS card and installed it in the M.2 slot of my Asus Z490-I motherboard using this Wifi Card to NGFF Key A/E M2 adapter.

How can I check if my PC actually recognise the Wifi card? I didn't see anything in BIOS.

Should I install something to make it working (such as a kext)? If I understand well, the card I bought is recognised by default by macOS, and does not require any additional installation.

Or maybe should I install AirportBrcmFixup and BrcmPatchRAM, as explained in this section of the guide: When and what kexts to use

submitted by /u/Kr118218
[link] [comments]
[► Source]
Share:
Freirburro on 12:26:00 PM

ROG GL553VD (OpenCore): Resolving Network Issues in macOS

By Freirburro
Graphics guide hackintosh Intel OpenCore Performance USB WiFi
--

opencore

Network issues on Hackintosh or unsupported Macs are typically caused by chipset incompatibility, incorrect kext pairing, or corrupted network preferences. Here is a structured approach to resolve them.

Step 1 — Identify Your Network Chipset

Open System Information > Wi-Fi (or Bluetooth) or use Hackintool to find the exact controller model.

Step 2 — Install the Correct Kext

For Intel Wi-Fi use AirportItlwm, for Broadcom use BrcmPatchRAM, and for Ethernet use IntelMausi or RealtekRTL8111.

Step 3 — Reset Network Preferences

If Wi-Fi connects but has no internet, delete the network preference files and reboot.

Step 4 — Verify Location Services

Go to System Settings > Privacy & Security > Location Services and ensure it is enabled.

Expected Results

  • Wi-Fi connects automatically after reboot
  • Bluetooth pairs and remains connected
  • Location Services works in Maps and other apps

Related Searches

Original Question: "ROG GL553VD (OpenCore)"

So, finally after how many hours of watching people making hackintoshes. I decided that it's time for me to ride the plane too.

My laptop specs are :

CPU : Intel Core i7-7700HQ GPU : Nvidia GTX 1050ti RAM : 8GB DDR4 2333mhz Storage : 256GB SSD + 1TB HDD

Ports : 1x HDMi, 1x type-c port, 2x usb 3 and 1x usb2

For the GPU, I don't need it for now because I'll be focusing with programming and very light photoshop/illustrator for Icons and images for the apps that we are developing.

For the wifi, I'm more of a ethernet person. But I have a wifi dongle do that I can still use it wirelessly.

Now, I'm planning for an openCore approach for this. I saw a github, ZiQiLN was the github handle. I think I can also peek from his configs to help me get through the installation.

My main concern is:

  1. Will I be able to use the 1TB HDD for secondary drive, for files only purposes?

  2. I'm not a gamer or heavy video editor, is it worth it?

  3. Will the HDMi port work? I know that it is optimus. Also, after reading some threads about my laptop, the GPU is hooked with the HDMi(?). What does that mean?

  4. Will that type-c port work? I might need it in the future.

I'm asking you guys since you guys have experience already. Thank you very much ! ☺️ Cheers!

submitted by /u/joken767
[link] [comments]
[► Source]
Share:
Freirburro on 12:26:00 PM

Hackintosh kvm accelerate — iGPU and dGPU Configuration Guide

By Freirburro
Graphics guide hackintosh OpenCore
--

opencore

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments. Below is a systematic approach to diagnosing and fixing them.

Step 1 — Verify GPU Compatibility

Check if your GPU model is natively supported in your target macOS version. AMD Radeon RX 400/500/5000 series generally work natively. NVIDIA support ended at High Sierra for most cards.

Step 2 — Update Essential Kexts

Ensure Lilu and WhateverGreen are installed and current.

Step 3 — Configure Boot Arguments

Add -v keepsyms=1 debug=0x100 for debugging. For AMD cards add agdpmod=pikera.

Step 4 — Confirm Metal Support

Open About This Mac > System Report > Graphics/Displays. Metal support should be listed.

Expected Results

  • Graphics acceleration is smooth
  • Correct resolution on all displays
  • No GPU-related kernel panics

Related Searches

Original Question: "Hackintosh kvm accelerate"

Is it is possible to accelerate hackintosh kvm by gtx 1650 gpu

submitted by /u/Inevitable-Cobbler44
[link] [comments]
[► Source]
Share:
Freirburro on 12:26:00 PM

can i hackintosh my acer — GPU and Display Troubleshooting

By Freirburro
Acer Graphics guide hackintosh Intel OpenCore
--

opencore

Graphics support varies widely across Hackintosh builds. Whether you are dealing with a black screen, no acceleration, or resolution issues, this guide covers the essentials.

Step 1 — Verify GPU Compatibility

Check if your GPU model is natively supported in your target macOS version. AMD Radeon RX 400/500/5000 series generally work natively. NVIDIA support ended at High Sierra for most cards.

Step 2 — Update Essential Kexts

Ensure Lilu and WhateverGreen are installed and current.

Step 3 — Configure Boot Arguments

Add -v keepsyms=1 debug=0x100 for debugging. For AMD cards add agdpmod=pikera.

Step 4 — Confirm Metal Support

Open About This Mac > System Report > Graphics/Displays. Metal support should be listed.

Expected Results

  • Graphics acceleration is smooth
  • Correct resolution on all displays
  • No GPU-related kernel panics

Related Searches

Original Question: "can i hackintosh my acer?"

hi, i found my old acer aspire es1-531-p4sw, it has intel pentium and intel hd graphics. will some version of mac os work on it?

submitted by /u/newthefox
[link] [comments]
[► Source]
Share:
Freirburro on 12:26:00 PM

Hack Pro Mini-ITX Success MacOS Catalina 10.15.7 OpenCore 0.6.2 — How to Get Wi-Fi and Bluetooth Working

By Freirburro
Audio Bluetooth Boot DualBoot Graphics guide hackintosh HPLaptop Intel keyboard macOSSequoia OpenCore Performance WiFi
--

sequoia

A working network setup is essential for a functional Hackintosh. Here is how this community member achieved connectivity and what steps you can follow.

Step 1 — Identify Your Network Chipset

Open System Information > Wi-Fi (or Bluetooth) or use Hackintool to find the exact controller model.

Step 2 — Install the Correct Kext

For Intel Wi-Fi use AirportItlwm, for Broadcom use BrcmPatchRAM, and for Ethernet use IntelMausi or RealtekRTL8111.

Step 3 — Reset Network Preferences

If Wi-Fi connects but has no internet, delete the network preference files and reboot.

Step 4 — Verify Location Services

Go to System Settings > Privacy & Security > Location Services and ensure it is enabled.

Expected Results

  • Wi-Fi connects automatically after reboot
  • Bluetooth pairs and remains connected
  • Location Services works in Maps and other apps

Related Searches

Original Question: "Hack Pro Mini-ITX Success MacOS Catalina 10.15.7 OpenCore 0.6.2"

Hack Pro Mini-ITX Success MacOS Catalina 10.15.7 OpenCore 0.6.2

Chococat Says Hi from his little yellow house

I haven't seen someone using a Z490I Aorus Ultra around here, so I thought it would be a good idea to help people with a similar setup to mine.

Here goes my hardware:

CPU: i5 10400GPU: Intel Integrated Graphics UHD 630RAM: 16Gb DDR4 XPG Spectrix 3000MHzMotherboard: Z490I Aorus Ultra (Mini-ITX in case you missed the I in front of the model)Audio Codec: Realtek 1220-VBEthernet Card: Intel i225-vWifi/BT Card: Intel WiFi 6 AX-201Touchpad and touch display devices: NoneBIOS revision: F5Mouse: Logitech G903Keyboard: Razer Huntsman Elite (US Layout)AIO: Gamer Storm Captain Castle 240EX with 2 stock coolers from the AIO

Coolers: 2 outtake coolers from NZXT (came with the case)Case: NZXT H210I

SSD: 500Gb Western Digital Black NVMe M.2Hard Drive 1: 1Tb Seagate Barracuda 7200RPM 32mb

Hard Drive 2: 140Gb Western Digital Green (don't know the RPM, I salvaged it from my aunt's very old laptop) 16mb

NZXT RGB LED Strip

One thing I'd like to note is that I'm in no way capable of providing a good tutorial on how to install MacOS Catalina, but here's a few things I learned in the past two days.

  1. Mind the flash drive you're using. When I first tried (and failed miserably) I was using a SanDisk Cruzer Blade 32Gb flash disk. There's nothing wrong with it, but for an installer, it would give me the "OCB: Loadimage failed: unsupported" and nothing else after selecting Install MacOS (external) during the pre-install phase (which is Boot->Bios->Boot Option (Flash Disk/Opencore) ->List of things to select). I looked for this in the guide, but it seems no one else has had this issue. My solution was to use a generic 8Gb Flash Drive.
  2. Some people might find that the internet is not working after successfully booting into the installer (this happened to me). After selecting "Reinstall MacOS Catalina" and selecting "Continue" on the following page, a warning saying "An Internet connection is required to install MacOS" would appear. The fix for this was in a 3-minute video in Russian. Here's the link: https://www.youtube.com/watch?v=d-OmPYc15es. Also, it will only work with the ethernet cable if you have the same mobo as mine, I couldn't get the WiFi to work.
  3. Another problem I had was with audio, but this is easily fixed by just changing the layout in the config.plist file. Don't know how to do that? Well, open proper-tree, go to the part where it says NVRAM, search for boot args and add alcid=xxx, where the xxx would be your layout, depending on your audio card. If you don't know which one you have, I highly recommend you go to your motherboard's factory website and search for it.
  4. During installation, the screen would go black. Idk if this happened because I am using a DP connector for my primary monitor, but just wait. In my case, the installer said it would be done in 47 minutes, so I started a timer for 50 minutes and watched an episode of The Queen's Gambit on my phone. Once I finished watching, I went back to the office and boom, there it was, my MacOS setup screen.
  5. Regarding monitors, I highly recommend that you don't use more than one monitor during installation, things get mosaicyish (this word doesn't exist, but you know what I mean, the HDMI monitor shows some things and the DP one goes green and grey with some flickering).
  6. I generated my SSID and other identifiers before installing the MacOS. Did it with GenSMBios in Windows 10 and added the generated ids to my config.plist using proper-tree. I see some people doing it after installing MacOS, but since the guide recommended that I should do it before, I thought "fair enough" and did it as well. Apple Account is working and I can finally enjoy some paid apps on my computer.

That's it for my experience with making my first Hackintosh. Other than the non-orthodox methods above, I just followed Dortania's guide for opencore 0.6.2, section Comet-Lake.

Thank you all, from the community, for sharing your builds, attempts, successes and problems. Thanks to all of this material I could make my own Hackintosh. I hope I was able to help some of you.

And if anyone knows the reason behind the problems I've had, I'd love to know :P

Much love from Brazil!

​

PS: This is my first post on Reddit, if the formatting is wrong, <del>I'm a disgrace for learning HTML and not knowing how to format a post on Reddit</del> I beg your pardon, however I hope that you can at least understand the troubles I had and learn something from it.

submitted by /u/CommunicationOk6936
[link] [comments]
[► Source]
Share:
Freirburro on 12:26:00 PM

Resolving Boot Issues: Dell latitude 7400 2-1 efi/ hackintosh files

By Freirburro
Boot Dell guide hackintosh OpenCore
--

opencore

Boot problems can occur for many reasons — from BIOS settings to incorrect OpenCore configuration. Here is a step-by-step guide.

Step 1 — Boot with Verbose Mode

Add -v keepsyms=1 debug=0x100 to your boot arguments.

Step 2 — Check Firmware Settings

Disable Secure Boot, Fast Boot, and CFG Lock. Set SATA to AHCI. Enable UEFI boot mode.

Step 3 — Validate OpenCore Configuration

Run ocvalidate on your config.plist. Use ProperTree to perform a clean snapshot.

Step 4 — Test with a Fresh USB Installer

Recreate the installer on a different USB drive and try a USB 2.0 port.

Expected Results

  • Verbose boot passes the previous stopping point
  • The installer sees the target disk
  • Keyboard and mouse respond during the installer

Related Searches

Original Question: "Dell latitude 7400 2-1 efi/ hackintosh files ?"

Hi I’m looking for the efi / drivers for the latitude 7400 2-1 laptop

Thanks!

submitted by /u/itzikr1234
[link] [comments]
[► Source]
Share:
Freirburro on 11:26:00 AM

macOS Boot Fix: Fault CR2 Panic - Asus FX705GM

By Freirburro
ASUS Boot dsdt guide hackintosh OpenCore
--

opencore

A boot failure is one of the most frustrating issues when setting up a Hackintosh. The error message or last verbose line before the freeze is the key to identifying the root cause.

Step 1 — Boot with Verbose Mode

Add -v keepsyms=1 debug=0x100 to your boot arguments.

Step 2 — Check Firmware Settings

Disable Secure Boot, Fast Boot, and CFG Lock. Set SATA to AHCI. Enable UEFI boot mode.

Step 3 — Validate OpenCore Configuration

Run ocvalidate on your config.plist. Use ProperTree to perform a clean snapshot.

Step 4 — Test with a Fresh USB Installer

Recreate the installer on a different USB drive and try a USB 2.0 port.

Expected Results

  • Verbose boot passes the previous stopping point
  • The installer sees the target disk
  • Keyboard and mouse respond during the installer

Related Searches

Original Question: "Fault CR2 Panic - Asus FX705GM"

Fault CR2 Panic - Asus FX705GM

Hi there,

I have been trying to Hackintosh my laptop using OpenCore 0.6.2, after having a painful experience with Clover and enjoying OC on my desktop.

I have tried to understand why I am getting this panic and have updated the voodoo kexts, tried without them, and spent hours trying to understand DSDT/SSDTs and the difference between GPI0 and XOSI.

Please can someone point out my mistakes and help me get to the installer :)

I have linked my config.plist and a picture of what the folder looks like.

https://preview.redd.it/7rl4dkw7xew51.png?width=694&format=png&auto=webp&s=c3a61d4d556ed8f2c6937daa2bf7b2b00c32bff0

https://preview.redd.it/zp1rhmw7xew51.jpg?width=1600&format=pjpg&auto=webp&s=b2925b82f1b48e173a7b2818fc64e663ab2e8155

submitted by /u/mhjl
[link] [comments]
[► Source]
Share:
Freirburro on 11:26:00 AM

Please release Hackintosh guide for amd laptop: Fixing Graphics on Hackintosh or Mac

By Freirburro
AMDRyzen Graphics guide hackintosh Intel OpenCore
--

opencore

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments. Below is a systematic approach to diagnosing and fixing them.

Step 1 — Verify GPU Compatibility

Check if your GPU model is natively supported in your target macOS version. AMD Radeon RX 400/500/5000 series generally work natively. NVIDIA support ended at High Sierra for most cards.

Step 2 — Update Essential Kexts

Ensure Lilu and WhateverGreen are installed and current.

Step 3 — Configure Boot Arguments

Add -v keepsyms=1 debug=0x100 for debugging. For AMD cards add agdpmod=pikera.

Step 4 — Confirm Metal Support

Open About This Mac > System Report > Graphics/Displays. Metal support should be listed.

Expected Results

  • Graphics acceleration is smooth
  • Correct resolution on all displays
  • No GPU-related kernel panics

Related Searches

Original Question: "Please release Hackintosh guide for amd laptop"

I have a laptop in which ryzen 5 3550h cpu and gtx 1650 GPU. I want to install hackintosh on my laptop.

For Intel laptops guide already available on the website. Please release guide for amd laptops also.

submitted by /u/Inevitable-Cobbler44
[link] [comments]
[► Source]
Share:
Freirburro on 11:26:00 AM

In memory panic stackshot — Stuck at Boot? Here Is What to Do

By Freirburro
Boot guide hackintosh HPLaptop KernelPanic MacBookAir MacBookPro macOSSonoma OpenCore Performance Sleep
--

sonoma

A boot failure is one of the most frustrating issues when setting up a Hackintosh. The error message or last verbose line before the freeze is the key to identifying the root cause.

Step 1 — Boot with Verbose Mode

Add -v keepsyms=1 debug=0x100 to your boot arguments.

Step 2 — Check Firmware Settings

Disable Secure Boot, Fast Boot, and CFG Lock. Set SATA to AHCI. Enable UEFI boot mode.

Step 3 — Validate OpenCore Configuration

Run ocvalidate on your config.plist. Use ProperTree to perform a clean snapshot.

Step 4 — Test with a Fresh USB Installer

Recreate the installer on a different USB drive and try a USB 2.0 port.

Expected Results

  • Verbose boot passes the previous stopping point
  • The installer sees the target disk
  • Keyboard and mouse respond during the installer

Related Searches

Original Question: "In memory panic stackshot"

Hi. I have an i5-3230M laptop. I use clover 5114. Once i have tried bad efi which i have found on web. But after that always when i boot i have message the system was automatically rebooted after panic. You can see logs here. I have tried to reinstall system and clean nvram from clover by pressing F11 and used script for system but it doesn't help. But what is interesting I use Macbook Pro 10,2 smbios but in the stackshot we can see macbook air 5.1. What can you advice?

panic(cpu 1 caller 0xffffff80048469aa: Kernel trap at 0xffffff7f8777b988, type 13=general protection, registers: CR0: 0x0000000080010033, CR2: 0xffffff8115859000, CR3: 0x0000000018836000, CR4: 0x00000000001626e0 RAX: 0x3f0011855318aa30, RBX: 0xffffff80260411e0, RCX: 0xffffff80050a5701, RDX: 0x000000000000005a RSP: 0xffffff812119bb40, RBP: 0xffffff812119bb70, RSI: 0x0000000000000000, RDI: 0xffffff8025fc8480 R8: 0xffffff8024cb0ed8, R9: 0xffffff80050a3510, R10: 0xffffff80050a57b0, R11: 0xffffff80050a57b0 R12: 0xffffff7f8777c8b3, R13: 0xffffff802a27caf0, R14: 0xffffff8025fc8480, R15: 0xffffff8005223d80 RFL: 0x0000000000010246, RIP: 0xffffff7f8777b988, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0xffffff8115859000, Error code: 0x0000000000000000, Fault CPU: 0x1, PL: 0, VF: 0) Backtrace (CPU 1, Frame : Return Address 0xffffff8004551a20 : 0xffffff800471a65d mach_kernel : _handle_debugger_trap + 0x49d 0xffffff8004551a70 : 0xffffff8004854a75 mach_kernel : _kdp_i386_trap + 0x155 0xffffff8004551ab0 : 0xffffff80048465fe mach_kernel : _kernel_trap + 0x4ee 0xffffff8004551b00 : 0xffffff80046c0a40 mach_kernel : _return_from_trap + 0xe0 0xffffff8004551b20 : 0xffffff8004719d27 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff8004551c20 : 0xffffff800471a117 mach_kernel : _panic_trap_to_debugger + 0x227 0xffffff8004551c70 : 0xffffff8004ec1abc mach_kernel : _panic + 0x54 0xffffff8004551ce0 : 0xffffff80048469aa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffff8004551e60 : 0xffffff80048466a8 mach_kernel : _kernel_trap + 0x598 0xffffff8004551eb0 : 0xffffff80046c0a40 mach_kernel : _return_from_trap + 0xe0 0xffffff8004551ed0 : 0xffffff7f8777b988 as.lvs1974.HibernationFixup : __Z11findServicePK15IORegistryPlanePKc + 0xb8 0xffffff812119bb70 : 0xffffff7f8777b53f as.lvs1974.HibernationFixup : __ZZN4HBFX4initEvEN3$_18__invokeEPvR13KernelPatchermym + 0x4f 0xffffff812119bc10 : 0xffffff7f875bdf9d as.vit9696.Lilu : __ZN7LiluAPI20onEntitlementRequestEPFvPvP4taskPKcRP8OSObjectES0_ + 0x25d 0xffffff812119bc50 : 0xffffff7f875b5efd as.vit9696.Lilu : __ZN13KernelPatcher18setupKextListeningEv + 0x4fd 0xffffff812119bd30 : 0xffffff8004d9e38c mach_kernel : __ZN6OSKext4loadEhhP7OSArray + 0x79c 0xffffff812119bda0 : 0xffffff8004dac269 mach_kernel : __ZN6OSKext22loadKextWithIdentifierEP8OSStringPP8OSObjectbbhhP7OSArray + 0x1a9 0xffffff812119bdf0 : 0xffffff8004e251de mach_kernel : __ZNK11IOCatalogue14isModuleLoadedEP12OSDictionaryPP8OSObject + 0xee 0xffffff812119be40 : 0xffffff8004e069b5 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0x385 0xffffff812119bef0 : 0xffffff8004e0649e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2de 0xffffff812119bf50 : 0xffffff8004e08c56 mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x186 0xffffff812119bfa0 : 0xffffff80046c013e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: as.vit9696.Lilu(1.3.8)[FC38993B-FBDB-3E9A-AC3E-73704D26ACF6]@0xffffff7f875b4000->0xffffff7f875d5fff as.lvs1974.HibernationFixup(1.2.9)[5D3F8F32-AA94-3AEC-997F-407520E243FC]@0xffffff7f8777a000->0xffffff7f8777ffff dependency: as.vit9696.Lilu(1.3.8)[FC38993B-FBDB-3E9A-AC3E-73704D26ACF6]@0xffffff7f875b4000) BSD process name corresponding to current thread: kernel_task Boot args: keepsyms=1 alcid=127 igfxframe=0x01660009 -v -lilubetaall debug=0x100 vsmcgen=1 Mac OS version: 19G73 Kernel version: Darwin Kernel Version 19.6.0: Sun Jul 5 00:43:10 PDT 2020; root:xnu-6153.141.1~9/RELEASE_X86_64 Kernel UUID: 783946EA-6F11-3647-BF90-787AEA14B954 Kernel slide: 0x0000000004400000 Kernel text base: 0xffffff8004600000 __HIB text base: 0xffffff8004500000 System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C System shutdown begun: NO Panic diags file available: YES (0x0)) System uptime in nanoseconds: 39544390694 last loaded kext at 39130783340: |IOAccelerator!F2 438.7.3 (addr 0xffffff7f85ed5000, size 806912 loaded kexts:!<)

​

submitted by /u/AlexeyFo
[link] [comments]
[► Source]
Share:
Freirburro on 11:26:00 AM

Hackintosh OS Selection: Underperforming 9900k

By Freirburro
guide hackintosh OpenCore
--

opencore

The best macOS version depends on your hardware age, GPU support, and daily workload requirements.

Step 1 — Match macOS to Your Hardware

Newer Intel hardware (8th gen and later) generally works best with the latest macOS. Older hardware may benefit from OpenCore Legacy Patcher.

Step 2 — Check GPU Support

AMD Radeon RX 400/500/5000 series are supported natively. NVIDIA cards are limited to High Sierra and earlier.

Step 3 — Update Before You Upgrade

Update OpenCore, kexts, and config.plist before attempting a macOS upgrade.

Step 4 — Test Your Essential Apps

Verify that your critical applications all launch and function correctly after upgrading.

Expected Results

  • The system boots consistently after upgrade
  • Graphics acceleration and Wi-Fi work
  • All essential applications function correctly

Related Searches

Original Question: "Underperforming 9900k"

Hey guys, first time posting in here, hoping someone can steer me in the right direction.

Today i upgraded my 9700f to a 9900k chip, it was a straight swap with no issues, but the 9900k seems to be underperforming, judging by its geekbench 5 score (8100, should be closer to 8800). Is there anything that could be holding it back? perhaps my system is configured for the old chip and is not utilising the new one perfectly?

My brother built this machine for me so it might be something obvious to you guys, but alien to me.

Thanks for any help

submitted by /u/wintursoldier
[link] [comments]
[► Source]
Share:
Freirburro on 8:26:00 AM

Kernel Panic On High Sierra 10.13.6 — OpenCore Boot Configuration Help

By Freirburro
Boot guide hackintosh Intel KernelPanic macOSVentura OpenCore Performance USB
--

ventura

A boot failure is one of the most frustrating issues when setting up a Hackintosh. The error message or last verbose line before the freeze is the key to identifying the root cause.

Step 1 — Boot with Verbose Mode

Add -v keepsyms=1 debug=0x100 to your boot arguments.

Step 2 — Check Firmware Settings

Disable Secure Boot, Fast Boot, and CFG Lock. Set SATA to AHCI. Enable UEFI boot mode.

Step 3 — Validate OpenCore Configuration

Run ocvalidate on your config.plist. Use ProperTree to perform a clean snapshot.

Step 4 — Test with a Fresh USB Installer

Recreate the installer on a different USB drive and try a USB 2.0 port.

Expected Results

  • Verbose boot passes the previous stopping point
  • The installer sees the target disk
  • Keyboard and mouse respond during the installer

Related Searches

Original Question: "Kernel Panic On High Sierra 10.13.6"

Hello! I tried last night to install Hackintosh High Sierra 10.13.6 on my old PC. But I had issue like kernel panic. I tried with safe mode and Apple Logo appear then my PC reboots automaticly. I have tried with no kexts and one million parameters nothing work! Here is the PHOTO of kernel panic. Here is my PC:

  1. Intel core i3 540
  2. NVdia GeForce 210
  3. 2 HDDs (One is MBR 320GB with Pardus [Linux] other one is GPT 500GB with Chromium OS) NOTE: I want to install on 500 GB!
  4. BIOS DDR3 Motherboard (American Megatrens)
  5. I have 16GB Sandisk USB Stick

Please help me! I want Hackintosh for XCode and need fast! Thank you!

submitted by /u/Illustrious-Dig194
[link] [comments]
[► Source]
Share:
Freirburro on 8:26:00 AM

HP pavilion 15-MacBookPro13,1 it took me time but its finally working: Resolving Network Issues in macOS

By Freirburro
Battery Bluetooth Boot Graphics guide hackintosh HPLaptop Intel KernelPanic macOSSequoia OpenCore Performance Sleep WiFi
--

sequoia

A working network setup is essential for a functional Hackintosh. Here is how this community member achieved connectivity and what steps you can follow.

Step 1 — Identify Your Network Chipset

Open System Information > Wi-Fi (or Bluetooth) or use Hackintool to find the exact controller model.

Step 2 — Install the Correct Kext

For Intel Wi-Fi use AirportItlwm, for Broadcom use BrcmPatchRAM, and for Ethernet use IntelMausi or RealtekRTL8111.

Step 3 — Reset Network Preferences

If Wi-Fi connects but has no internet, delete the network preference files and reboot.

Step 4 — Verify Location Services

Go to System Settings > Privacy & Security > Location Services and ensure it is enabled.

Expected Results

  • Wi-Fi connects automatically after reboot
  • Bluetooth pairs and remains connected
  • Location Services works in Maps and other apps

Related Searches

Original Question: "HP pavilion 15-MacBookPro13,1 it took me time but its finally working."

HP pavilion 15-MacBookPro13,1 it took me time but its finally working.

Hello guys I just wanted to show you my hackintosh, it took me a couple days to make it fully functional, the only thing i'm missing is Airdrop but its because i have an intel wifi chip. Thanks to the guys who took their time to help me out when i was stuck in something.

HP pavilion 15
Intel i7 6500u
Intel HD Graphics 520
Intel wifi/bluetooth dual band 3165
16GB DDR3 Ram
MacOs Catalina 10.15.7

Things that work:
WiFi
Ethernet
Bluetooth
Graphics acceleration
Battery Indicator
Sleep/Wake
Brightness and full volume
iMessage & Facetime

https://preview.redd.it/qssyreu3vdw51.png?width=1920&format=png&auto=webp&s=109317fc2481248b1b25008041bfecadd56e15b5

submitted by /u/No_Recognition_6203
[link] [comments]
[► Source]
Share:
Freirburro on 8:26:00 AM

Resolving Boot Issues: boot verse stuck

By Freirburro
Boot guide hackintosh OpenCore
--

opencore

A boot failure is one of the most frustrating issues when setting up a Hackintosh. The error message or last verbose line before the freeze is the key to identifying the root cause.

Step 1 — Boot with Verbose Mode

Add -v keepsyms=1 debug=0x100 to your boot arguments.

Step 2 — Check Firmware Settings

Disable Secure Boot, Fast Boot, and CFG Lock. Set SATA to AHCI. Enable UEFI boot mode.

Step 3 — Validate OpenCore Configuration

Run ocvalidate on your config.plist. Use ProperTree to perform a clean snapshot.

Step 4 — Test with a Fresh USB Installer

Recreate the installer on a different USB drive and try a USB 2.0 port.

Expected Results

  • Verbose boot passes the previous stopping point
  • The installer sees the target disk
  • Keyboard and mouse respond during the installer

Related Searches

Original Question: "boot verse stuck"

boot verse stuck

so finally after many weeks of efforts my bootable for hackintosh works. but now when I select mac os external it stuck in boot verse. so, please help

https://preview.redd.it/ysxcjshrqdw51.jpg?width=3840&format=pjpg&auto=webp&s=93bff9931cda2bd09317d8ddc26c58032a979e5d

submitted by /u/iamankkkush
[link] [comments]
[► Source]
Share:
Freirburro on 7:26:00 AM

Hackintosh GPU Guide: Ivy bridge i3 3320 hackintosh

By Freirburro
Boot DualBoot Graphics guide hackintosh Intel macOSCatalina OpenCore Performance USB
--

catalina

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments. Below is a systematic approach to diagnosing and fixing them.

Step 1 — Verify GPU Compatibility

Check if your GPU model is natively supported in your target macOS version. AMD Radeon RX 400/500/5000 series generally work natively. NVIDIA support ended at High Sierra for most cards.

Step 2 — Update Essential Kexts

Ensure Lilu and WhateverGreen are installed and current.

Step 3 — Configure Boot Arguments

Add -v keepsyms=1 debug=0x100 for debugging. For AMD cards add agdpmod=pikera.

Step 4 — Confirm Metal Support

Open About This Mac > System Report > Graphics/Displays. Metal support should be listed.

Expected Results

  • Graphics acceleration is smooth
  • Correct resolution on all displays
  • No GPU-related kernel panics

Related Searches

Original Question: "Ivy bridge i3 3320 hackintosh"

I recently bought a pc which is i3 3320 processor on intel dh61ww motherboard 8gb ram and one gt610 GPU I want to install macOS catalina on it I've tried dortania 0.6.2 open core ivy bridge guide but can't make a uefi usb bootable windows 10 uefi usb boot and install on this machine but macOS uefi doesn't even show uefi partition in boot menu as well as in bios what should I do . Any version of Mac os would be good just keep it as backup machine.

submitted by /u/mjniazi84
[link] [comments]
[► Source]
Share:
Freirburro on 6:26:00 AM

Poor graphics performance on AMD: Fixing Graphics on Hackintosh or Mac

By Freirburro
AMDRyzen Graphics guide hackintosh OpenCore Performance
--

opencore

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments. Below is a systematic approach to diagnosing and fixing them.

Step 1 — Verify GPU Compatibility

Check if your GPU model is natively supported in your target macOS version. AMD Radeon RX 400/500/5000 series generally work natively. NVIDIA support ended at High Sierra for most cards.

Step 2 — Update Essential Kexts

Ensure Lilu and WhateverGreen are installed and current.

Step 3 — Configure Boot Arguments

Add -v keepsyms=1 debug=0x100 for debugging. For AMD cards add agdpmod=pikera.

Step 4 — Confirm Metal Support

Open About This Mac > System Report > Graphics/Displays. Metal support should be listed.

Expected Results

  • Graphics acceleration is smooth
  • Correct resolution on all displays
  • No GPU-related kernel panics

Related Searches

Original Question: "Poor graphics performance on AMD"

I think I'm going insane.

Does my computer just hate macOS, or what? I have garbage graphics performance on macOS for doing anything. Literally scrolling causes lag. I'm getting fed up with it at this point. I'm so close to giving up. Can anyone help out?

Basically I have issues with things like scrolling. Even if I have an app called SmoothScroll, I get terrible performance just scrolling a website like apple.com. That's really my main issue. I think my GPU gets worn out by macOS as well because I hear coil whine whenever I'm on macOS. Any ideas?

Yes, I did get the updated patches that improved graphics performance. They are vastly improved from before but performance could still be a lot better.

Specs: - Ryzen 7 1700 - Gigabyte Radeon 5700 XT Gaming OC - MSI B350 PC Mate - Fenvi HB-1200 - 16GB RAM - Samsung 960 Evo 500GB

Sorry for the terribly formatted post. I'm just so frustrated right now.

submitted by /u/lolreppeatlol
[link] [comments]
[► Source]
Share:
Freirburro on 5:26:00 AM

Building a Bad Apple, need some recommendations and help.: Fixing Graphics on Hackintosh or Mac

By Freirburro
Graphics guide hackintosh macOSCatalina OpenCore
--

catalina

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments. Below is a systematic approach to diagnosing and fixing them.

Step 1 — Verify GPU Compatibility

Check if your GPU model is natively supported in your target macOS version. AMD Radeon RX 400/500/5000 series generally work natively. NVIDIA support ended at High Sierra for most cards.

Step 2 — Update Essential Kexts

Ensure Lilu and WhateverGreen are installed and current.

Step 3 — Configure Boot Arguments

Add -v keepsyms=1 debug=0x100 for debugging. For AMD cards add agdpmod=pikera.

Step 4 — Confirm Metal Support

Open About This Mac > System Report > Graphics/Displays. Metal support should be listed.

Expected Results

  • Graphics acceleration is smooth
  • Correct resolution on all displays
  • No GPU-related kernel panics

Related Searches

Original Question: "Building a Bad Apple, need some recommendations and help. ."

Hey all,

Currently working on a G3 build at the moment using some old components I have at the moment. Presently I have a 4690K and 32GB of Corsair memory, and of course the case.

I'm planning on using The Laser Hive's rear conversion plate, as well as a 240mm radiator where the original fan is mounted, and a Barrow pump/res/block combo. I've got a Corsair TX750M as my intake fan so it'll be running in negative pressure config.

I was just looking for what options work best for a direct install of Catalina on an mATX Z87 board, and what would you reckon would be a good match, GPU wise? I'm thinking a Radeon RX5500 should do nicely, but I'm not sure how well that plays with Catalina.

Also, I need some replacement bits for the G3 case, namely a side panel, top handles and the latching mechanism that sits under the main board. Does anyone have access to a store which sells these, or even anyone who has 3D printable files for these parts?

Any help would be appreciated. It's a bit of an uphill battle, but dangit, it'll work.

submitted by /u/Beanobuilds
[link] [comments]
[► Source]
Share:
Freirburro on 5:26:00 AM

Successfully installed Catalina on an Optiplex 5040 SFF — How to Get Wi-Fi and Bluetooth Working

By Freirburro
Audio Bluetooth Boot Graphics guide hackintosh HPLaptop Intel macOSCatalina OpenCore Performance USB WiFi
--

catalina

A working network setup is essential for a functional Hackintosh. Here is how this community member achieved connectivity and what steps you can follow.

Step 1 — Identify Your Network Chipset

Open System Information > Wi-Fi (or Bluetooth) or use Hackintool to find the exact controller model.

Step 2 — Install the Correct Kext

For Intel Wi-Fi use AirportItlwm, for Broadcom use BrcmPatchRAM, and for Ethernet use IntelMausi or RealtekRTL8111.

Step 3 — Reset Network Preferences

If Wi-Fi connects but has no internet, delete the network preference files and reboot.

Step 4 — Verify Location Services

Go to System Settings > Privacy & Security > Location Services and ensure it is enabled.

Expected Results

  • Wi-Fi connects automatically after reboot
  • Bluetooth pairs and remains connected
  • Location Services works in Maps and other apps

Related Searches

Original Question: "Successfully installed Catalina on an Optiplex 5040 SFF"

Successfully installed Catalina on an Optiplex 5040 SFF

CPU: i7-6700 Quad-Core 3.4GHz

GPU: Intel HD530

RAM: 8GB 1600Mhz DDR3

Ethernet Card: I219-V

Audio Codec: 00:1f.3 Intel Series 100/C230 HD Audio Controller(via arch)

Make and Model: Optiplex 5040 SFF

WiFi/BT: none

Touchpad: none

Guide used: OC Vanilla Guide (Desktop[Skylake])

Working: -Everything e.g: -Sidecar -iServices -USB ports

Not working: -DRM -PS/2 ports. but not needed anyway

  • Audio(don’t need, but help on this would be useful as I have a series 100 intel audio card)

Current Issues:

  • After OC(0.6.2)is done booting up I have to unplug and replug the HDMI cable to get video again. But no glitches and all is fine after this.

​

Monitor

submitted by /u/Icx27
[link] [comments]
[► Source]
Share:
Freirburro on 2:26:00 AM

My First Build. asking for advice — GPU and Display Troubleshooting

By Freirburro
Boot DualBoot Graphics guide hackintosh Intel macOSCatalina OpenCore Performance
--

catalina

Graphics issues usually stem from an unsupported GPU, missing acceleration patches, or incorrect boot arguments. Below is a systematic approach to diagnosing and fixing them.

Step 1 — Verify GPU Compatibility

Check if your GPU model is natively supported in your target macOS version. AMD Radeon RX 400/500/5000 series generally work natively. NVIDIA support ended at High Sierra for most cards.

Step 2 — Update Essential Kexts

Ensure Lilu and WhateverGreen are installed and current.

Step 3 — Configure Boot Arguments

Add -v keepsyms=1 debug=0x100 for debugging. For AMD cards add agdpmod=pikera.

Step 4 — Confirm Metal Support

Open About This Mac > System Report > Graphics/Displays. Metal support should be listed.

Expected Results

  • Graphics acceleration is smooth
  • Correct resolution on all displays
  • No GPU-related kernel panics

Related Searches

Original Question: "My First Build. asking for advice."

Hi, it will be my first time building a hackintosh and this is the hardware i am planning to use:

Bug Sur or Catalina build.

Processor: Intel Xeon E5 2620 v3 Mobo: x99 motherboard DDR4 M.2 (Chinese) Ram: DDR4 8GB*2 SSD: Kingston 240gb x 2 GPU: 1050ti 4gb PSU: Corsair vs450

is there a chance i can run the latest version of hackintosh?

Budget is tight. Purpose: Video editing 1080p and some office works. With dual boot to Windows for some driving simulator games.

Any input is appreciated. Thank you guys.

submitted by /u/TurnThingsInMyLife
[link] [comments]
[► Source]
Share:
Freirburro on 2:26:00 AM

Rebuilt my Hackintosh into a Cooler Master NR200, and mixed up all the parts — Wi-Fi and Bluetooth Troubleshooting Guide

By Freirburro
ASUS Audio Bluetooth Boot Graphics guide hackintosh macOSSequoia OpenCore Performance USB WiFi
--

sequoia

Network issues on Hackintosh or unsupported Macs are typically caused by chipset incompatibility, incorrect kext pairing, or corrupted network preferences. Here is a structured approach to resolve them.

Step 1 — Identify Your Network Chipset

Open System Information > Wi-Fi (or Bluetooth) or use Hackintool to find the exact controller model.

Step 2 — Install the Correct Kext

For Intel Wi-Fi use AirportItlwm, for Broadcom use BrcmPatchRAM, and for Ethernet use IntelMausi or RealtekRTL8111.

Step 3 — Reset Network Preferences

If Wi-Fi connects but has no internet, delete the network preference files and reboot.

Step 4 — Verify Location Services

Go to System Settings > Privacy & Security > Location Services and ensure it is enabled.

Expected Results

  • Wi-Fi connects automatically after reboot
  • Bluetooth pairs and remains connected
  • Location Services works in Maps and other apps

Related Searches

Original Question: "Rebuilt my Hackintosh into a Cooler Master NR200, and mixed up all the parts!"

Rebuilt my Hackintosh into a Cooler Master NR200, and mixed up all the parts!

Quick backstory:

  • I had all the parts, except a new SFF case.
  • I was using a full size ATX board initially for my Hackintosh in an NZXT 510, and a Mini-Itx build as my primary gaming rig in a corsair 280x.
  • During quarantine, I scored a 9900k from some guy whose kid broke his alienware laptop, so he took it apart and sold me the processor for cheap. SCORE.
  • Ultimately, I had the time on my hands, and I wanted to rebuild my gaming set up with a better water-cooled loop, plus it was due time to do a cleaning.

What I did:

  • The not relevant bit:
    • Rebuilt my mini itx gaming rig using the 9900k and a GA-Z370 Aorus Gaming Wifi board, 32GB RAM, GTX 1080 ti - into a full Lian Li 011D Custom water cooled loop.
  • The Relevant bit:
    • Rebuilt my ATX hack into a Mini-itx beast using:
      • i7-9700k
      • Asus Z390i (mint itx)
      • Cooler Master Hyper Black 212
      • SF Dagger 650w SFX
      • Cooler Master NR200 White
      • Sapphire Pulse 5700 XT Nitro+
      • 16GB DDR4 Crucial Ballistix RAM
      • Broadcom BCM94360NG - plug & play wifi card (Replaced the onboard wifi card from Asus)
  • Whats Working
    • Everything... iServices, DRM, GPU Acceleration, Audio, Wifi/Bluetooth etc.
  • Havent Tried
    • Integrated graphics

How I Did it:

  • Rebuilt the EFI Folder on an existing flash drive installer I already had on 10.15.6
  • Followed the vanilla guide, along with couple other users suggestions regarding usb ports to get wi-fi / bluetooth working
    • Using USB Inject All Kext & setting XCHI Port Limit to false.

What i'm not happy about:

  • My cable management looks like ass. Had to take the build a part a couple times, because the io cover of the mobo was too beefy, and wouldn't let my GPU lock in correctly. So I finally got it running, and tapped out for the day. I'll revisit eventually.
  • Cooling may be limited... ideally i'd like to get a AIO for the CPU, and be able to install some fans on the top of the case to pull in some fresh air, and exhaust through the side.

Images: https://imgur.com/a/ae8IvBA

submitted by /u/onesikg
[link] [comments]
[► Source]
Share:
Freirburro on 1:26:00 AM

Any tips/guides to dual boot Ryzentosh 5 1600 AF and Windows 10 on Gigabyte MoBo — iGPU and dGPU Configuration Guide

By Freirburro
AMDRyzen ASUS Boot DualBoot Graphics guide hackintosh OpenCore Performance
--

opencore

Graphics support varies widely across Hackintosh builds. Whether you are dealing with a black screen, no acceleration, or resolution issues, this guide covers the essentials.

Step 1 — Verify GPU Compatibility

Check if your GPU model is natively supported in your target macOS version. AMD Radeon RX 400/500/5000 series generally work natively. NVIDIA support ended at High Sierra for most cards.

Step 2 — Update Essential Kexts

Ensure Lilu and WhateverGreen are installed and current.

Step 3 — Configure Boot Arguments

Add -v keepsyms=1 debug=0x100 for debugging. For AMD cards add agdpmod=pikera.

Step 4 — Confirm Metal Support

Open About This Mac > System Report > Graphics/Displays. Metal support should be listed.

Expected Results

  • Graphics acceleration is smooth
  • Correct resolution on all displays
  • No GPU-related kernel panics

Related Searches

Original Question: "Any tips/guides to dual boot Ryzentosh 5 1600 AF and Windows 10 on Gigabyte MoBo?"

Hi, I'm new in all this Hackintosh stuff and pretty scared to do it, I was trying to find guide for my exact setup which is Ryzen 5 1600 AF, GTX 1660, Gigabyte GA-AB350M-DS3H V2 with 16 gigs of RAM but I couldn't find anything 1:1

I have a few questions:
-Do I have to install Windows again and lost all my data?
-Does anyone have Hackintosh on my CPU, and is it good, is everything working?
-Will Mac be really better for tasks such as film editing, computer graphics et cetera?
-Would these programs work fine on my Ryzentosh: Adobe Premiere Pro, Adobe After Effects, Adobe Photoshop and is sync with iPhone good?
-Can I have both systems on the same SSD drive? I have only one so it's problem, the second one is HDD (I don't want to place any system on this guy-)

Thanks and sorry for my english I don't know if it's that bad

submitted by /u/xAXYENx
[link] [comments]
[► Source]
Share:
Freirburro on 1:26:00 AM

Lenovo IdeaPad C340-14API: macOS Hackintosh Walkthrough

By Freirburro
guide hackintosh Lenovo macOSBigSur OpenCore
--

big_sur

This guide provides a structured approach to troubleshooting and resolving the reported issue.

Step 1 — Identify Your Hardware

Record your system specifications: CPU, GPU, storage, wireless chipset, motherboard.

Step 2 — Check Compatibility

Compare your hardware against the OpenCore installation guide.

Step 3 — Update Core Components

Refresh kexts, OpenCore version, and config.plist as a single controlled change.

Step 4 — Test Systematically

Verify boot, graphics, network, sleep/wake, audio, and USB individually.

Expected Results

  • The system boots consistently
  • The original issue is resolved
  • No new problems introduced

Related Searches

Original Question: "Lenovo IdeaPad C340-14API"

Hi everybody I looked for lenovo ideapad tutos, but no success... I tried with catalina, but is in fact is it already possible with big sur ?

​

If you have some clues I would be very happy cause I'm kinda lost!

submitted by /u/mac6mil
[link] [comments]
[► Source]
Share:
Freirburro on 12:26:00 AM