iATKOS | United Kingdom

I have got high Sierra install on Intel PC and this was done effortlessly. How am I meant to install big Sur with very little fiddling around ie. Without unibeast etc submitted by /u/AstronomerEasy96 [link] [comments] [► Source]

submitted by /u/MultimediaLucario [link] [comments] [► Source]

I AM NOT A UNIBEAST USER!!! I'M TRYING TO GET NOTIFICATIONS. COMPLETELY IGNORE THIS POST. submitted by /u/XoneSogie720 [link] [comments] [► Source]

Greetings all My Macbook Pro died and lockdown means there's no repair options so I'm trying to get an old Hackintosh spun back up. It currently has Sierra installed and I'd like to install High Sierra which is the most recent OSX version which supports my GPU which is a Nvidia 1080ti. I have tried installing using Unibeast but have had issues with the boot menu even seeing the UEFI option on the USB stick I'm using. Other PC's and laptops around the house will see the clover EFI partition without issue but the PC will not, for some reason. I have been through the BIOS multiple times trying to figure out if there's something I need to change but apart from following the advice on AMI boards on TonyMac installer guides I'm a bit stumped. The strangest thing is that initially I had success making a USB stick boot to the Clover installer but whilst troubleshooting past the initial install process the stick stopped booting. Subsequent attempts at making a n...

I build Hackintoshs very often...from unibeast to clover to opencore now... although I'm not an expert, still went through so much...and I had built nearly the same Hackintoshs before without any issue... here is the spec: HP 280 G3 SFF: Motherboard: HP motherboardCPU: 8400iGPU: UHD630RAM: 32GBWIFI: AX2001 HDMI & 1 VGA (didn't use) Port Installed Big Sur already with fake platform ID 012345678. When i try to use 07009B3E or 00009B3E and framebuffer-patch, after some loading the screen gone black. Had researched on the internet and youtube, tried to use the hackintool to generate a proper PciRoot(0x0)/Pci(0x2,0x0) and patch connector type (don't really know if i do it right) Attached the OC folder in the link. Thanks so much for helping!!! https://www.dropbox.com/s/qvwwchfbimvlyhd/HP%20280%20G3%20SFF%20OC.zip?dl=0 submitted by /u/glasschan [link] [comments] [► Source]

SPECS: Board : AsRock Z390 Pro-4 CPU : Intel Core i9 9900k RAM : Crucial Ballistix DDR4 16 GB SSD : Samsung 970 EVO Plus 1 TB GPU : onboard graphics until further notice Wireless : n/a until further notice OS : 10.14.6 Mojave Guide : https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/ EFI : https://drive.google.com/drive/folders/1VqUom1MUkLf8jM_DgJWnil_8M8bxDHTD?usp=sharing Clover r5122, Clover Configurator 5.17.3.0 Hello, all. First attempt at a Hackintosh that I have put in a retrofitted Power Mac G4 case, and it's going pretty well overall, however, I am attempting a fairly basic Vanilla install and keep running into the same kernel panic upon booting from the install USB: better display pending I have been Googling and scouring tonymacx86 forums trying to find solutions via missing or conflicting kexts or drivers and alternate config.plists, but no matter what I try I keep running into the same error. I also have a bootable USB that I set up using U...

CPU: i9-9900k GPU: Radeon RX580 RAM: 64GB 2667 MHz DDR4 Motherboard/Laptop Make and Model: MSI MPG Z390 Gaming Pro Carbon Audio Codec: Realtek 1220 Ethernet Card: I219 Wifi/BT Card: none BIOS revision: 7B17v1B Followed Dortania's OpenCore install guide, using prebuilt aml files suggested for coffee lake desktop in the guide. Edited config.plist in xcode since I already had it installed in mojave/catalina previously installed via unibeast/clover. I started looking at OC Monday because one of the software updates for mojave wasn't happy with clover. Ultimately I made a new partition for Big Sur, put it there, and found that the clover install of Mojave wasn't happy booting with the OC 0.6.5 Big Sur Installer usb key, so from the OC 0.6.5 menu I picked the installer for Mojave to re-install that over the previous Clover install. Now both Mojave and Big Sur can be booted from OC 0.6.5... The install guide is very well written and had answers to all my questions ...

Hey there I am looking to install macOS Catalina on an external hard drive, that of which is not an SSD but rather a plain, old HDD. I found a guide that can be used to install the OS on a partition within an internal hard drive in my PC, but I need to do it on an external. The guide uses Unibeast and Multibeast -- https://www.macworld.co.uk/how-to/install-macos-pc-3632329/ Is it possible to use this method and create a bootable macOS system on my external drive, with Unibeast and all of that? The reason I would like to do this is that I would like to run Logic Pro X using the much more powerful system hardware on my PC as compared with my Macbook Pro, which frankly is not an optimal circumstance for doing that. The above guide does not specify whether or not you have the option to select an external drive to install the operating system onto. I'm also going to be using the external to install from, which I read in comments section for another reddit post is indeed possible by...

I've been following this guide https://www.tonymacx86.com/threads/unibeast-install-macos-catalina-on-any-supported-intel-based-pc.285366/#create_unibeast and am using the following build: - Gigabyte Z490 I Aorus Ultra - Core i3-10100 - Crucial 8 GB I am using clover with catalina and when I run in verbose mode it stops with the following lines of code: Err(0xE), 0 @ LocHB 71B4903C-14EC-42C4-BDC6-CE1449930E49 and LOG:EXITBS:START] If I turn off verbose mode, it basically just freezes at the apple logo. This is my first hackintosh build so I don't entirely know what i'm doing, but does anyone have any tips or suggestions for me? ​ edit: I tried googling around but other people are having the same issues.. https://www.tonymacx86.com/threads/help-install-stuck-on-apple-logo.308072/ submitted by /u/AndreThompson-Atlow [link] [comments] [► Source]

I've been struggling with this for a while and it's driving me nuts!!! If someone can help me through this I'm willing to pay for the help, can't really afford too much but name a price and I'll discuss it with you. I5 9400 MSI B365M PRO VH 16gb 2400mhz ddr4 no gpu As far as I've researched, ALL of this hardware is osx compatible. Tried Unibeast and manual clover installs (though I understand Unibeast isn't supported here so I'm willing to try whatever works) I can never actually get to the osx install page. Posted to forums with little help. If someone is willing to give it a shot I can pm you and we can figure it out together!! submitted by /u/MercenaryPsyduck [link] [comments] [► Source]

When making installer with unibeast It install without any issue but when using Keby Lake Guide on OpenCore website it is getting stuck at installer (saying 15 minutes remaining and I left it on for whole night) after done with Disk Utility. My Laptop Specifications Processor: Intel Core i3 7020U Processor, 2.3 GHz Graphic: Integrated Intel HD Graphics 620 submitted by /u/ShahzarKibriya [link] [comments] [► Source]

Good morning, I am opening this thread as I am now desperate. I think I've read all possible posts from Tonymacx86 and reddit but wasn't able to make it work... I decided to open a thread here as no one is helping in Tonymacx86 ... Hopefully the reddit community can.. ​ Motherboard: Asus Prime B360M-A CPU: I5 9400F GPU: Sapphire RX 5500 XT Nitro+ Ram: Corsair Vengeance 2x8G I've followed "Unibeast" method to flash my 16GB Usb2.0 pendrive. I've tried different combinations of config.plist and kexts (USBInjectAll.kext, USBPorts.kext, ...). Most important parameter I understood I had to configure in the config.plist for the graphics was "agdpmod=pikera" which I did. But the system keeps rebooting when trying to launch clover...(see image attached) Tried different USB ports but all same... I bought specifically this 5500xt as it was referred as working in Catalina by community but I am starting to think it is maybe my motherboard? Belo...

Hi there Im making an attempt at this for the very first time! Working my way through the instructions, managed to compile all the components and turned it on and it didn't blow up... win! These are my components: GIGABYTE Z390 AORUS ELITE LGA 1151 (300 Series) Intel Z390 SATA 6Gb/s ATX Intel Motherboard Sapphire PULSE Radeon RX 580 8GB GDDR5 PCI-E Dual HDMI / DVI-D / Dual DP OC w/ Backplate (UEFI), 100411P8GOCL Intel Core i9-9900K Coffee Lake 8-Core, 16-Thread, 3.6 GHz (5.0 GHz Turbo) LGA 1151 (300 Series) 95W BX806849900K Desktop Processor Intel UHD Graphics 630 Now I've hit a road block. I have followed the instructions in: UniBeast: Install macOS Catalina on Any Supported Intel-based PC​ In regards to the BIOS setttings whilst following these instructions: To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up Load Optimized Defaults If your CPU supports VT-d , disable it If your system has CFG-Lock , disable it If ...

Hello r/hackintosh ! I was wondering how to get OS X Yosemite onto my laptop. If this is important, here are the specifications: CPU: Intel(R) Core(TM) i3-1005G1 CPU @ 1.20GHz, 1190 Mhz, 2 Core(s), 4 Logical Processor(s) GPU: Intel(R) UHD Graphics Memory/RAM: 8GB DDR4 at 2667 MHz Storage Type: NVMe SSD (I know I will need additional kexts for this) Motherboard Manufacturer and Model: Lenovo, LNVNB161216 Install methods I have tried: Unibeast, Niresh, Olarila, Traditional way (Real Mac) If you guys have anything to help me run Yosemite on my laptop it will be greatly appreciated! Thank you for reading and have a good rest of the day! submitted by /u/Suitable_Traffic7294 [link] [comments] [► Source]

I'm attempting to do a completely fresh install of Catalina using the latest version of UniBeast, and when I start up from the USB installer it does not finish launching. Here's what I get: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.bsd.dlrhelper Service exited with abnormal code: 1 (More detail in the attachment) I have tried this with two different video cards (1070Ti & RX580), and the message is identical. In boot arguments I have tried toggling both Nvidia settings, which made no difference. In my bios I have VT-d disabled, Secure Boot Mode disabled, IO Serial Port disabled, XHCI Handoff enabled. I've tried the USB installer in 3 different ports. Thoughts? ​ Motherboard : ASRock Z370 Killer SLI/ac CPU : Intel Core i7-8700K Graphics (tried both separately): MSI Radeon RX 580 EVGA GeForce GTX 1070 Ti My High Sierra installation has been working fine with the 1070 btw. https://pr...

https://dortania.github.io/OpenCore-Install-Guide/ ​ Okay, truth be told, I struggled with TonyMac(Unibeast, Multibeast) and it hasn't worked at all. But OpenCore which seemed very difficult at the first glance worked smoothly. Honestly, it's not the most convenient tool but it's not difficult neihter. ​ I just follow the instructions. and at the very first boot, Audio and DRM(Netflix I guess) work very well. And I played league of legends. :) Super Fast, I love it. I'm gonna check some features like vault, sleep ,, etc. ​ CPU: i5-9400F GPU: GTX1060 6GB RAM: 16GB Motherboard/Laptop Make and Model: Gigabyte B365M DS3H Audio Codec: Ethernet Card: Realtek 8211 (I guess) Wifi/BT Card: X Touchpad and touch display devices: X BIOS revision: Which of the guides on the sidebar you used. OpenCore What's working, and what isn't working. so far everything works ​ ​ My Bios has no CSR? CSF? Lock, so I turned on a Quirk in config.plist. Did I have an...

Hello I followed this guide by the book https://www.tonymacx86.com/threads/...ported-intel-based-pc.285366/#create_unibeast yet I get stuck at Apple logo at 100% after clover install. I did select verbose mode but nothing comes up since it's the pre install progress (normal?) Cpu: Intel 2500k Mb: Asus p8z68v Gpu: Nvidia gtx 970 Bios settings: https://www.tonymacx86.com/attachments/2386f570-0f50-4c47-87c7-7fbe4c051ff1-jpeg.493212/ submitted by /u/zefs [link] [comments] [► Source]

Motherboard: Gigabyte GA-IMB370TN CPU: i5-8600T Graphics: GTX 1650 (But for now I'm using iGPU) Install Method: Unibeast This is my third build and probably my strangest. The motherboard I'm using is very unconventional, so I'm not finding any talk of hackintoshing it around the web. Anyway, I'm getting stuck at the verbose line "HID: Legacy shim 2," after which it instantly reboots. I actually had to use a slo-mo camera to figure out what it was spitting out just before reboot. It spits out 5 lines in row, then restarts. This all happens after it does about 30s-60s of other installation things that seem to be going fine. I could only capture the beginning of the first two lines because I had to get the camera close enough to where it was readable. IOUSBHost Interface(0x10000032b): matching deferred by IOUSBHostHIDDev... IOUSBHost Interface(0x10000032a): matching deferred by IOUSBHostHIDDev... deferred rematching count 2 HID: Legacy shim 2 HID: Legacy...

Hello! I recently built a Z490 computer with the following specs: - Intel i7-10700 with an iGPU - MSI Z490-A PRO - 2x Corsair 8GB 3200Mhz RAM I created the High Sierra installer with Unibeast using the guide on tonymacx86, but when booting the installer from the USB, it gets stuck at "end randomseed+++++++". When booting the same USB on a H97 computer, it works fine and the install is successful. Things I've already tried: - Configuring BIOS according to MSI hackintosh guides online - Applying all the possible Aptio fixes separately - Applying the Free2000 fix - Shuffling RAM sticks around in the computer (Both in either As or Bs or one stick in either the first or the second slot) - The KALSR fix in the Dortania guide, got a slide value of 128, but didn't work. I read online that this is a memory problem, but none of the proposed fixes or .efi files seem to work. Has anyone had this problem on an MSI Z490 system, and if so, what was the fix? Any help would be gr...

So here’s the deal. I have a shizzy version of OS X Mavericks (Niresh) running for some experiments. Since I don’t have a Mac and I’m to lazy to wait till Christmas for a 2015 MacBook Air, I want to use Niresh (no internet) to get Unibeast, and OS X El Capitan over to the system to install. Hopefully having internet after that, I’ll make a vanilla open core hackintosh. Is this a hell yeeea, or a hell nooo. In the future I’ll call this “series” Dell Inspi~Mac You can recommend different series names if you want submitted by /u/XoneSogie720 [link] [comments] [► Source]