iATKOS | United Kingdom

Identifying the motherboard chipset for your Lenovo T480 is an essential step in setting up a Hackintosh using the iATKOS Project. Based on the information you provided, the component you found in Device Manager, "Mobile 7th/8th Generation Intel(R) Processor Family I/O LPC Controller (U with iHDCP2.2 Premium) - 9D4E," is indeed related to the chipset, but it doesn't explicitly state the chipset model. Your Lenovo T480, equipped with an Intel i5-8250U CPU, typically uses an Intel chipset from the 8th Generation family. The most common chipset for this family in laptops is the Intel U-Series, which is designed for power efficiency and integrated graphics performance, matching your CPU and GPU configuration. Audience: Beginner to Intermediate 1. Check System Information:    - On your Lenovo T480, open the `System Information` app in Windows.    - Navigate to the `System Summary` section. 2. Find Chipset Information:    - Look for entries under `Motherboard` or...

My computer went to shit and started boot looping after I moved everything into my new case, and the shop I took it too said it was most likely my motherboard or cpu (they didnt have any AMD parts to test either on which I thought was strange but whatever) and from what I’ve experienced it’s most likely my motherboard so I need to find a new one that’s preferably matx. Any recommendations that won’t fail on me after two months of use? Current build: Ryzen 5 3600, Msi b550m bazooka, Red devil rx580, Corsair vengeance lpx 16gb 3600mhz, Corsair cx550m, Nzxt h510 submitted by /u/brdyer92 [link] [comments] [► Source]

I'm brand new to PC building and just created my first build, but it's not booting up properly (details below). Here are the parts: CPU: Ryzen 5 3600 Motherboard: Aorus b450m RAM: 8g GPU: GTX 1650 3 fans Case: phantex eclipse p350x case PSU: 600w The issue is that it does not turn on my monitor. The cpu cooler fan starts spinning and then stops. The motherboard troubleshooting indicator (red LED lights) show that it is a cpu problem. It initially worked when I had a Gigabyte GA-A320M motherboard, but I wanted to have more than two fans and I did not know I could just buy a splitter. So I got a new motherboard that supported more than two fans. Everytime I wanted to turn on my computer, I would have to turn off the computer and the power supply switch. I turned both back on and my monitor wouldn’t work and the CPU red led light was on. I repeated this process twice, sometimes three times, and then it would finally turn on and everything was running smoothly until I put it o...

My PC Specs: 2TB HDD, 1TB SSD, 64gb~3000Mhz Ram, Rtx 2060, Aio liquid cooler 120mm, Gigabyte Z490M Gaming X Motherboard, i7 9700f core processor, i have been thinking about a cpu upgrade to i9 10th gen but i dont know. My motherboard is Micro Atx and my case is small with RGB Lights. submitted by /u/Blackpilled5500 [link] [comments] [► Source]

I'm currently running an i7 8700 running on a z370 motherboard, and I've been thinking about upgrading to a 10700k (and getting a z490 board to run it, of course). However I've been wondering if it's worth spending the extra money to get the 10700k. My other components include a 1070ti, 16gb of 2400mhz ram (planning on upgrading this), and a 550w psu (probably going to upgrade this as well). I primarily use my pc for gaming. submitted by /u/flarexe [link] [comments] [► Source]

As far as i can tell with my little research, this is a pretty good gaming rig Obviously the video card i'm going to have to wait for. As for the PSU, i still have my https://pcpartpicker.com/product/qYTrxr/evga-power-supply-220g20550y1 I'm pretty sure 550 watts is going to be fine for this new build? ​ Any pointers are appreciated :) ​ ​ ​ ​ [PCPartPicker Part List]( https://pcpartpicker.com/list/GqtrCz ) ​ Type|Item|Price :----|:----|:---- **CPU** | [Intel Core i9-9900K 3.6 GHz 8-Core Processor]( https://pcpartpicker.com/product/jHZFf7/intel-core-i9-9900k-36ghz-8-core-processor-bx80684i99900k ) | $390.16 @ Amazon **CPU Cooler** | [Corsair H100i RGB PLATINUM SE 63 CFM Liquid CPU Cooler]( https://pcpartpicker.com/product/XzDJ7P/corsair-h100i-rgb-platinum-se-63-cfm-liquid-cpu-cooler-cw-9060042-ww ) | $169.99 @ Best Buy **Motherboard** | [Asus PRIME Z390-A ATX LGA1151 Motherboard]( https://pcpartpicker.com/product/2k3H99/asus-prime-z390-a-atx-lga1151-motherboard-...

Hello, So I'm trying to build my first pc and I was checking if everything in my cart was compatibility. I ran into a warning and was wondering if someone could help me out or explain what's wrong. Warning - "Some AMD B550 chipset motherboards may need a BIOS update prior to using Vermeer CPUs. Upgrading the BIOS may require a different CPU that is supported by older BIOS revisions." My list: PcPartPicker Thanks) Thanks submitted by /u/desmondxashford [link] [comments] [► Source]

Basically, I have no clue about mac OS but there is a software I would like to run on an ipad and would like to sync/use the same app on my desktop. Problem is the software is not available on PC, so I am thinking I should do a dual boot with win 10/mac OS. submitted by /u/IceHypothalamus [link] [comments] [► Source]

My Hackintosh is waking up semi-randomly, at ~2 hour intervals, on its own, before going back to sleep after a minute or two. Although the monitor is off all the time. I checked the log and saw a bunch of entries like this one: ```  ~$ log show --last 1d --style syslog | fgrep "Wake reason" 2021-03-08 19:12:11.733635-0800 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: RTC (Alarm) ``` In energy saver settings, "Wake for network access" and "power nap" are both disabled. In sharing settings, everything is ticked off. Any other suspects you can think of? Thanks. Specs: * Big Sur 11.2.2 * GPU: NVIDIA GeForce GT 730 4 GB graphics * CPU: Quad-Core i7-6700k (Skylake) * Motherboard: GA Z170MX-Gaming 5 submitted by /u/delingren [link] [comments] [► Source]

I've come across this error before, on a different Sandy Bridge build that I tried to install High Sierra 10.13.6 on using OpenCore. I'm certain it's an OpenCore issue, because after having no success solving it on that box, I gave up, deleted the entire OpenCore EFI on my USB stick, installed Clover to the EFI instead, and the High Sierra/Sandy Bridge install went from start to finish without any drama -- or this error message: https://preview.redd.it/if9r022b63m61.jpg?width=660&format=pjpg&auto=webp&s=49290ebfa4b364fb51beef5d9dcfe0445a0c6aac I imagine I can install High Sierra on this box using Clover once again, but I want to do an OpenCore Sandy Bridge build this time. ​ CASE: Mini-Box m350 • MOBO: AsRock H67M-ITX • CPU: i3-2125 • OC version: 0.6.6 • Kexts: RealtekRTL8111-V2.2.2; AppleALC; VirtualSMC; Lilu; WhateverGreen; USBInjectAll (per Dortania Guide, which says it's needed because "AsRock is dumb"); XHCI-Unsupported; BIOS: v.2.10...

CPU: Intel Core i3-7100; Kaby Lake GPU: Intel HD Graphics 630 RAM: 8GB 2133MHz DDR4 Motherboard Model: Gigabyte GA-H270N-WIFI BIOS revision: F8d Motherboard Model Website: https://www.gigabyte.com/Motherboard/GA-H270N-WIFI-rev-10 Audio Codec: Realtek ALC1220 Ethernet Card: Intel Ethernet Dual GbE LAN I219-V (only one of the two ports works, the one beside the USB-C port doesn’t work) Wifi/BT Card: Intel Wireless 8265/ 8275 (comes with the MB) Other installed OSs: Windows 10 20H2 v2, Ubuntu 20.04.2 Guides used: Dortania’s OpenCore Install Guide. What's working: - iGPU with full acceleration. - Sound. - Ethernet - Wifi and bluetooth. (I’m using the stock builtin card that comes with the motherboard) - AirPort, AirDrop - iMessages, Facetime - All USB ports; USB3, USB-C, USB2 What isn’t working: - Sleep - Chime sound at the loading of OpenCore OS picker ​ Notes: Troubleshooting iGPU with full acceleration I followed the Dortania’s guide to the...

Hey guys,first I wanna say that I’m a total noob about this and I need some help.I’d like to do a hackintosh on my current laptop,I’d prefer to install macos in dual boot with windows,my specs are: Intel(R) Core(TM) i7-9750H CPU 2.60 GHz 16GB Ram DDR4 Motherboard: MS-16W1 PCI-Express 3.0 Gtx 1660 ti 6gb Ssd 512 gb I have some questions to ask first. 1)I noticed after some researches that high sierra would be the last os that supports my graphic card and since I wanna work with macos I definitely need the gpu working at its best,so is it high sierra the maximum or is there some way I can get it working on catalina or big sur? 2)Next question is,will everything on the windows side be lost,I heard u must install macos first and then install windows again,is there a way to keep windows on it’s own without damaging any of it’s content and installing a fully working macos througha partition? 3)Last thing I wanna say is that I don’t have access to the ethernet cable so I could only do this w...

Finally! After banging my head against the wall for several weeks, I finally succeeded! Much of the credit goes to u/Solind9 and u/Drummerboybac , you legends helped me so much, cheers! Hardware: CPU: Intel i5-6500 GPU: Intel HD530 iGPU RAM: 8gb 1600MHz DDR3 Motherboard: Optiplex 5040 standard Ethernet Card: Intergrated (IntelMausi kext) Wifi/BT Card: N/A Working: Everything (including I-Services) Not Working: Sleep :( Originally installed Catalina but was able to update to Big Sur with no problems. Any questions: comment below/send me a message! Keywords: OpenCore, Dortania ​ https://preview.redd.it/iucklwa96zl61.png?width=1920&format=png&auto=webp&s=1dfe73e1048058635417d4ec8916c50390063c81 EFI tree (I hope this is allowed) submitted by /u/bdoxat [link] [comments] [► Source]

TL;DR; The Trash fairy bought me a computer. Take a look at the photos and parts list below and tell me if it can be Hackintoshed, AND if it's worth building a system around it, or parts of it at least. :) --- So... I was taking out the trash yesterday, and sitting right there next to the bins in my complex... a gaming PC!... Sort of. The guts of it were stripped out, but it has a Case, Motherboard, Power Supply, Fans, A bunch of cabling, and even RGB strip lighting. The guy's obviously building something else, so I'm guessing something in here is incompatible with his plans? I have been thinking of building a Hackintosh for a while now (For video editing and gaming as a side benefit), and I hope I have the building blocks for a good system here. Since I have never built a PC let alone a Hackintosh, I don't really know what I'm doing, so here are some pics. Tell me what I have here, and if I got lucky, or not. https://imgur.com/a/dsHBlZF What I (Sort of) Know...

Hiya, I have had this build a year and have had on going issues with USB, I thought it was an hardware issue until I just read that it's common with the Gigabyte Aorus Z390 Boards, however all them threads are achieved so I can't comment to get an update, so here goes. *Problem* at random times my USB's just stop working, it can happen once a day, once a week, very unpredictable. The only way to get them back is to hard reset the computer. I use the system for CAD work, granted not professionally however still annoying. Has anyone fixed this? I have attached my EFI folder. Specs - CPU: Intel i9 9900K Motherboard: Gigabyte Aorus Pro Z390 GPU: Vega 64 Bootloader: OpenCore 0.6.3 OS: Mac OS Big Surr 11.2.2 EFI: https://drive.google.com/file/d/1m2APcOrM1wVXJxbZKut6sTJwB1ovgXoG/view?usp=sharing ​ Thanks submitted by /u/C_Nicholson96 [link] [comments] [► Source]

Hi everyone, I'm excited to post this success. I had tried to install Big Sur before on this laptop but failed. Apparently an issue with booting was resolved in the latest OpenCore 0.6.7. I followed the Dortania guide and managed to get most things working. I borrowed a SSDT file from hagenest's repo to get the battery working. The most interesting part of this build was the USB mapping. I needed to add in the SSDT-RHUB.aml file from the guide before the internal USB ports would show up (cameras, touch screen, bluetooth). It took a while to figure that out. Other then that is was a straightforward following of the guide. g ithub repository Hardware: CPU: Intel Core i5-10210U GPU: Intel UHD RAM: 8GB / 2666MHz DDR4 Motherboard/Laptop Make and Model: Lenovo ThinkPad L13 Yoga Audio Codec: CX8070 Ethernet Card: Intel ethernet Wifi/BT Card: Intel Wireless-AC 9560 Touchpad and touch display devices: BIOS revision: 1.25 Working: Keyboard, trackpad, trackpoint, sound, m...

Specifications : Processor : AMD Ryzen 3600X Motherboard : Gigabyte GA-AB350N-Gaming WIFI (Mini-ITX) iGPU : none dGPU : XFX Radeon RX 580 Black Edition RAM : Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3200MHz C16 Storage : Samsung 970 EVO SSD 1TB M.2 SSD, Samsung 870 EVO 500GB 2.5 Inch SATA III SSD, Western Digital 2TB 7200 RPM HDD PSU: Corsair CX Series 750 Watt 80 Plus Case: NZXT H210 - Mini-ITX PC Gaming Case CPU Cooler: AMD Wraith Max Ethernet : Realtek® GbE LAN chip (10/100/1000 Mbit) Wifi : Intel® 802.11ac Dual Band WIFI and Bluetooth 4.2 USB : Fast 2 USB 3.1 Gen 2 with USB Type-A Audio Codec : Realtek® ALC1220 codec Boot Mode : UEFI Bootloader : OpenCore r0.6.7 OS Version : MacOS Big Sur 11.2.1 Monitor Model and Size : Asus 24" vg248qe 144hz Peripherals: Logitech G213 Prodigy Gaming Keyboard, Logitech G203 Gaming Mouse, M-Audio M-Track Duo Audio Interface, Akai MPK 225, Audio-Technica ATH-SR30BTGY Bluetooth Wireless Over-Ear Headphones Guide used: Dor...

Had an unused mATX case around and was intrigued by the new 10-series Intel CPU and chipset, so I took a stab at a modestly-priced Big Sur build. This isn't my everyday box, but it's up and working now, and iGPU UHD 630 graphics acceleration is working, thanks in large part to headkaze 's handy Hackintool . First, here are the build specs: Case: CoolerMaster N200 mATX Mini-Tower • CPU: Intel i5-10400 (using iGPU UHD 630 graphics) • Mobo: Asus PRIME Z490M-PLUS • RAM: 2x16GB GSKILL Ripjaws DDR4-3200 • HD: WD_BLACK NVMe SSD 500GB • PSU: Seasonic FOCUS GM-650 • macOS: Big Sur 11.2.2 • Boot Manager: OpenCore v.0.6.6 • Network: Intel I219V (using Ethernet only) • Audio: RealTek ALC887 (boot-arg alcid=1 ) NOTE: Display doesn't wake from sleep unless boot-arg igfxonln=1 is included in config.plist . Install from Big Sur USB stick went without a hitch, but UHD 630 graphics acceleration wasn't working. I studied a few reddits on the issue, like this one and this one , b...

Hardware: CPU: 3.2 GHz Quad-Core Intel Core i5-3470 GPU: ATI Mobility Radeon HD 5450 2 GB RAM: 32 GB 1600 MHz DDR3 Motherboard: HP 6300 Pro SFF (original motherboard) Audio Codec: ALC221 (currently I'm using VooDooHDA.kext for the HDMI audio to be recognized) Ethernet Card: Intel 82579LM PCI Express Gigabit Ethernet (I'm not using it) WI-Fi USB Adapter: https://www.ninepluswifi.com/view/product-name-1.html (it's cheap and they have drivers for download in their web page, even for Big Sur). Bluetooth: https://www.sabrent.com/product/BT-UB40/usb-bluetooth-4-0-micro-adapter-pc-v4-0-class-2-low-energy-technology/#description What guide followed: https://dortania.github.io/OpenCore-Install-Guide/config.plist/ivy-bridge.html#starting-point I followed this to get the video card working: https://github.com/chris1111/Legacy-Video-patch What part I got an issue with: can't manage to get working two monitors at the same time (trying to fix it). What files/config...

Hey peeps, I'm totally stuck and slowly losing my mind. I had a working system for 2 months and for a week I've been getting stuck at the loading screen unless I boot safe mode. I made no changes to OS or EFI and I'm still not sure what triggered it. The only unusual thing that happened prior was I got this error: https://www.reddit.com/r/protools/comments/bm8azy/software_component_unavailable_error_on_mac_any After some troubleshooting, I decided to do a clean wipe + reinstall. I used an identical EFI to the one I had working before but now whenever I boot I get stuck on or near the following line **ioconsoleusers gioscreenlockstate 3 ** System info | [CPU][Intel Core i9-9900K 3.6 GHz 8-Core Processor] | [CPU Cooler][EVGA CLC 360 74.82 CFM Liquid CPU Cooler] | [Motherboard][Gigabyte Z390 DESIGNARE ATX LGA1151 Motherboard] | [Memory][OLOy 32 GB (2 x 16 GB) DDR4-3200 CL16 Memory] | [Storage][Samsung 970 Evo 1 TB M.2-2280 NVME Solid State Drive] | [Storage][Samsung 9...