iATKOS | United Kingdom

Hey everyone, I'll be upgrading my GPU soon and wanted to know if there's anything I should change before doing so? I'm using OpenCore submitted by /u/No_Opportunity4265 [link] [comments] [► Source]

I have this issue. I have MSI RX Vega 56 8GB, it is a native Apple GPU also to Hackintosh too. But I was testing it and, I don’t know, I think when the vram is full. The GPU could enter in to the stress and the fans start to the max speed. The display is shutdown. Anyone had this fail too? submitted by /u/ericksalamanca_ [link] [comments] [► Source]

Full build info: https://au.pcpartpicker.com/b/Nxt8TW TLDR; Monterey/Opencore 0.9.X [Dortania] i7 10700K CPU Deepcool LS720 CPU cooler Gigabyte Z490M Corsair Vengeance Pro 4 x 16GB WD SN750 500GB (macOS boot) WD Blue SSD 500GB (win boot) WD Blue SSD 1TB (macOS storage) WD Blue SSD 1TB (win storage) Sapphire Nitro+ RX6600 XT (currently out for second RMA) Fenvi FV-T919 Corsair RM750e 750W PSU Context: - Had a working hack in March this year (Monterey, OC 0.9.0 or 0.9.1), was in the final stages of signing OC and putting the keys into the BIOS but had to put it aside to concentrate on uni for a few months using Windows only. Fast forward to now, I have time off and wanted to update OC and resign the keys before putting them into the firmware. So I grabbed OC 0.9.4 debug and went about replacing the OC files in a copy of my EFI on a flash drive. I also updated my kexts using Lilu and Friends, then finally did a snapshot of the OC folder for the config.plist. I booted from...

Does anyone know which SMBIOS I should use for Dell Xps 13 7390, i7-10510U, UHD 630? Thankyou! submitted by /u/Swift4k [link] [comments] [► Source]

Hi, I followed all the steps to create en USB installer of Ventura, but when I boot on EFI then launch the Ventura installation I'm facing this screen.It means in English "This MacOs Ventura Installer copy is broken and can't be used to install MacOS" Anyone as a solution ? Thanks ​ ​ https://preview.redd.it/fskqxocicglb1.jpg?width=1535&format=pjpg&auto=webp&s=ae284970c54616146f376543a9265660610b5ff7 submitted by /u/_Carlit0 [link] [comments] [► Source]

My computer which is an Intel Zeros computer was originally running Windows 10. I added the Clover system to my PC around early 2019 and it has been running fine however now Clover does not show either Hackintosh or Windows. This is a first for me as last time Clover did not work properly Windows was still showing and only the Hackintosh did not show because a hard drive failed. Thanks in advance submitted by /u/YonasDaYoYo [link] [comments] [► Source]

Hardware Specs: CPU: AMD Ryzen 5 4600G GPU: AMD Radeon Graphics RAM: 16GB 3200MHz DDR4 MoBo: Gigabyte A520M K Ethernet: RTL8111 WiFi: TL-WN725N What works: WiFi (probably) Sound (maybe) Graphics Acceleration (Thanks to NootedRed) Ethernet USB (partial) What does not: Bluetooth (no adapter) AirDrop (mostly because of the WiFi adapter) submitted by /u/TheKadenChatYo [link] [comments] [► Source]

Recently installed Big Sur on my 2011 iMac. Everything seems fine but sometimes the graphics start to glitch. Tried to fix it with the screen saver method and reinstalled the root patches but it doesn’t seem to fix the problem. Any advice or tips how to fix it? Processor: 3,06 Ghz Dual-Core Intel Core i5 RAM: 16GB 1333 Mhz DDR3 Graphics: Radeon HD 4670 256MB submitted by /u/Wild_Base_8929 [link] [comments] [► Source]

I literally spent my precious summer vacation to upgrade my old laptop to Monterey from Big Sur, and after maybe 90 restarts, it completely runs out of the box. I am very proud now, and thank to many posts on this subreddit that helped me accomplish this. During the process I encountered a lot of errors and bugs so if you have any questions, feel free to comment and I will try to answer you all. My Specs: CPU: i5 10300H GPU: Intel UHD 630 (GTX 1650ti disabled) RAM: 16gb DDR4 2933 MHz Laptop model: ROG Strix G15 (G512LI) Audio Codec: Realtek ALC294 Wifi: Intel Wi-Fi 6 AX201 160MHz Opencore 0.9.4 and Monterey 12.6.8 ​ https://preview.redd.it/fzg34cc92flb1.png?width=1920&format=png&auto=webp&s=7d4997956c26e0bd8597146b748b1c8d3ab543c7 submitted by /u/nn_myt [link] [comments] [► Source]

I've tried them all. I tried via recovery, via the config.plist file with nvram reset, but nothing works. It always turns back on. Please help me, my EFI folder is shared here. I am running OpenCore 0.8.7 (I set back csr-active-config back to all zeros) ​ https://drive.google.com/file/d/15tG8kYn95-3Cya0smMl770g47Qor9DGK/view?usp=sharing ​ ​ submitted by /u/stars7ruck [link] [comments] [► Source]

Hello friends Please guide Sapphire RX 5700 XT pulse work with ventura or not ? Means native supported? Recently, i buy rx 580 8gb some Chinese company but it's not worked i try to also vbios flash but don't support it so i return it. After refund money but it's cut some charges so just loss my money. So please guide me properly this graphiccard work natively ? Thank you submitted by /u/YouKnowABK [link] [comments] [► Source]

I have a Macbook Pro 2017 shows up as MacbookPro14,1 in OCLP. I am trying to install Sonoma beta, everything works fine until 13 minutes remaining to complete install and then it shows this screen for a few seconds and jumps into recovery mode. What’s going on ? submitted by /u/muchucover [link] [comments] [► Source]

Just curious if anyone has installed Sonoma on the 15” 2016 MacBook Pro and what your experience has been? Other than the issue with the T1 chip, is anything else major broken still? Also since it’s looking like the T1 issue likely won’t be fully fixed soon, if ever. Is there anything that should be disabled prior to updating from Ventura to avoid getting looked out of anything? submitted by /u/relink2013 [link] [comments] [► Source]

Cara foi uma luta mais está pronto tsssss. hardware: Processador: Intel I3-10100T 3 GHz Quad-Core Memoria: 8 GB 2666 MHz DDR4 Armazenamento: M2 NVMExpress 256,06 GB Gráficos: Intel UHD Graphics 630, 2048 MB Rede e Bluetooth: - Ethernet: Intel I219V11 PCI Express Gigabit Ethernet -Bluetooth e Wi-fi: Comet Lake PCH CNVi WiFi Tudo ok, wifi, rede, bluetooth, todas as saídas usb, tipo C e de video "VGA, HDMI e Display Port" ​ https://preview.redd.it/hw4zrnewxdlb1.png?width=1358&format=png&auto=webp&s=b86994bd6504929f94258fad62ec79653198406c ​ https://preview.redd.it/q8s7xi92ydlb1.png?width=298&format=png&auto=webp&s=23d20d7346bcc07d2aece394a38fd20e5fe67780 Agradecimentos ao Gabriel Luchina - Universo Hackintosh, suas dicas são perfeitas u/luchina-gabriel (209) Gabriel Luchina - Universo Hackintosh - YouTube submitted by /u/Frosty_Code_8159 [link] [comments] [► Source]

Hi everyone, I have a gaming laptop running Windows on a 512GB M.2 SSD. I'd like to add a SATA SSD to run MacOS, while keeping my current Windows setup intact for gaming. There's a detailed GitHub guide available for Hackintoshing my laptop model, but it's geared towards installing MacOS on the main drive. Can anyone guide me on how to adapt the GitHub instructions for a dual-boot setup on two separate drives? Ideally, I'd also like to create a shared data partition between both Windows and MacOS. Thanks for your help! Motherboard/Laptop model: Lenovo Legion 5 15IMH05a CPU: Intel Core i5-10300H 2.5 GHz Motherboard Chipset: Intel Comet Point-H HM470, Intel Comet Lake-H GPU: NVIDIA GeForce GTX 1650 + Intel UHD 630 RAM: 8GB DDR4- 2933MHz SODIMM Screen(s) Number: 1 Screen(s) Resolution: 1920x1080 (120Hz) Audio Codec: Intel Comet Point-H PCH - cAVS (Audio, Voice, Speech) nVIDIA TU117 HDMI/DP @ nVIDIA TU117 - High Definition Audio Controller Wifi/BT Card: Intel...

Did anyone find a solution to this? I've followed the https://dortania.github.io/OpenCore-Install-Guide/ guide word for word and still can't get past this secure boot violatiton. Can provide my EFI files etc My specs: CPU: Ryzen 5800x MOBO: Pro art B550 Creator RAM: 48gb 3200 MHZ Corsair GPU: Sapphire Pulse 5700XT SSD: WD SN770 1T PSU: 750W Bronze (not sure the brand) submitted by /u/DarthVegemite [link] [comments] [► Source]

submitted by /u/therealduckie [link] [comments] [► Source]

Need some assistance configuring an EFI for a Dell Vostro 15 7510 w an i7 11800h Tiger Lake. Been working on this for a month now need some. HELP!! submitted by /u/Sinceriously33 [link] [comments] [► Source]

Been using a ryzentosh on a rog strix b550 without any issues other than as the title states, I randomly have a bit of lag for a couple of seconds at a time and then all goes back to normal. I can’t for the life of me figure out what’s causing it….Anyone have any ideas? Running Ventura currently and had the same issue (maybe slightly more frequent) on Sonoma TIA submitted by /u/eastcoastscott [link] [comments] [► Source]

I used a prebuilt EFI for my ThinkPad T470 which comes in Skylake and Kabylake CPU. I use the Kabylake EFI and booted Ventura but when I use my Skylake EFI (I built by myself) it will get stuck at the Apple logo or gives the prohibited sign( sign fixed by changing SMBIOS). I was wondering if it needs an iGPU patch (spoof to kabylake) to boot? submitted by /u/ADTSCEO [link] [comments] [► Source]

I just rebooted my hackintosh and I noticed it was stuck at the lenovo logo for a long time and then the laptop went into bios and doesn’t show the OC option. I removed to SSD and put it in an external SATA to USB and it shows as uninitialised and same thing in macOS Recovery. How can this happen ? It was so random. submitted by /u/ADTSCEO [link] [comments] [► Source]

I used a prebuilt EFI for my ThinkPad T470 which comes in Skylake and Kabylake CPU. I use the Kabylake EFI and booted Ventura but when I use my Skylake EFI (I built by myself) it will get stuck at the Apple logo or gives the prohibited sign( sign fixed by changing SMBIOS). I was wondering if it needs an iGPU patch (spoof to kabylake) to boot? submitted by /u/ADTSCEO [link] [comments] [► Source]

What program do you use on macOS to write to NTFS drive? I use Tuxera but it's a lot slower than in native Windows. I dual boot and I have one 2TB HDD for both systems to store downloads, documents, games and stuff. Thanks in advance. submitted by /u/General-Interview599 [link] [comments] [► Source]

I’m an architect so AutoCAD, Adobes are a must and I can make them work smoothly with my Ryzentosh!!! https://github.com/NyaomiDEV/AMDFriend My specs: * AMD 5700X Asus Tuf Gaming B550M Wifi-II, latest bios dated 31/7/2023 with Above 4D decoding & ReBARs turned on. 64GB of Corsair @3200 RAM, Gigabyte Gaming RX 6800 XT *Samsung 980pro 1 TB NVME *Apple original 943692CS wifi-bluetooth card. *Opencore 0.9.4 and Ventura 13.5.1. I ran AutoCAD 2024 ,Adobe Photoshop, Indesign for more than 1 week daily now. No crash!!!!!! submitted by /u/Avocados6881 [link] [comments] [► Source]

I Have recently been trying to install mac os catalina on my Asus UX433FA, but i have a problem which is that when im going to install it gives me the option of intalling the os, partitioning the disks, etc... but when i go to install the os it says that i need an internet connection. But it never asked me for a wifi network. I Tried connecting it via terminal but i couldn't do it. Anyone knows how to fix it? Thanks. PD: Here is my EFI Folder https://drive.google.com/file/d/1q6khESxfPHffMdX0pIPycS9wqmtaJyhN/view?usp=sharing submitted by /u/ElMarkichiMC [link] [comments] [► Source]

opencore 0.9.4 cpu: ryzen 3600 gpu: asus dual rx480 4gb mb: gigabyte b550 vision dp ram: gskill trident z royal 2x8gb 3600 CL18 ssd: mx500 500gb error image: https://drive.google.com/file/d/1hZKt_A1HLK2wHaQVc0Micq55LUeXyPu-/view?usp=sharing config.plist: https://drive.google.com/file/d/1sDqVaRmEAIgqHh13Kukw68OcBhXraGNR/view?usp=sharing submitted by /u/hcy106 [link] [comments] [► Source]

Hi, I'm trying to do my first Hackintosh. I build my own EFI and i compiled the ACPIs from myself.I tried to boot it, but after the kernel load, my monitor turn off, but the PC still work! So, can you help me? CPU: Intel(R) Core(TM) i7-9700 CPU @ 3.00GHzi GPU: Intel(R) UHD Graphics 630 RAM: Ram 2x8 GB DDR4 Motherboard: Asus Prime B365-Plus SSD NvMe: Samsung SSD 970 EVO 500GB EFI+Log (Drive Link) submitted by /u/OperationArtistic244 [link] [comments] [► Source]

Well, how do I upgrade MacOS only, OC only or both? submitted by /u/CarAdditional7798 [link] [comments] [► Source]

I always get a black screen (monitor shuts off) after the initial text phase where i think it tries to boot the graphical installer. I think this is because it wants to switch back to the iGPU and disables the Nvidia GPU. I have gone through the WhateverGreen Shiki and Geforce FAQ without success. (It tells me to rename GFX0 to IGPU but how do i do this?) I‘m using BigSur with shikigva set to 40 and the iMac15,1 SMBios. My CPU is an Ivy Bridge 3470 and my GPU a Geforce 730 GK208 on a Intel series 7 motherboard from HP. Am i doing something wrong? submitted by /u/Juff-Ma [link] [comments] [► Source]

I already have Big Sur in this machine running perfectly fine. I’m trying to clean install Monterey and the installer just gets stuck here with a (stall?) concerning itlwm. I even disabled itlwm in config.plist and removed it from the kexts, but this issue still exists(shouldn’t deleting itlwm from the usb installer prevent this from happening?) what should I do? submitted by /u/Randamixer [link] [comments] [► Source]

Currently running Mint Linux (was on Fedora before). I *think* I have all the necessary kexts, ACPI, etc. files, complete config.plist edited with ProperTree and ran GenSMBIOS to pull info needed to put into plist, saved file, reboot to USB drive--my problem seems to be related to not having some files in the correct place?? Or possibly config.plist issues it doesn't see the files in com.apple.recovery.boot to select Operating System?? See attached photo. +++laptop confg Machine: Type: Laptop System: Dell product: Inspiron 13-7353 Mobo: Dell model: 0GDN13 UEFI: Dell v: 1.23.0 date: 05/09/2019 CPU: Info: model: Intel Core i3-6100U bits: 64 type: MT MCP arch: Skylake Graphics: Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Dell driver: i915 Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: Network: Device-1: Intel Wireless 3165 driver: iwlwifi Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb ​ https://preview.redd.it/...

I already have Big Sur in this machine running perfectly fine. I’m trying to clean install Monterey and the installer just gets stuck here with a (stall?) concerning itlwm. I even disabled itlwm in config.plist and removed it from the kexts, but this issue still exists(shouldn’t deleting itlwm from the usb installer prevent this from happening?) what should I do? submitted by /u/Randamixer [link] [comments] [► Source]

SMBIOS Mac Model is ' MacPro7,1 ' This is the hardware I'm working with: Tuf Gaming B550 Plus WIFIMotherboard Ryzen 7 5700X cpu RX 580 8Gb Sapphire edition gpu (still unable to fix DRM even though I found my GPU path, and tried setting shikigva=80 and 128 for the hell of it) 32 Gb of DDR4 RAM have intel WiFi and Bluetooth (both working fine and able to discover other networks and other bluetooth devices no problem) 1Tb SATA SSD To my knowledge, MacPro7,1 should support AirPlay and Universal Control... or am I totally wrong and missing something here..? submitted by /u/kolya0099 [link] [comments] [► Source]

submitted by /u/imjustalazyretard [link] [comments] [► Source]

submitted by /u/CarAdditional7798 [link] [comments] [► Source]

Hello, i'm trying to install macos on a AMD laptop, i read about noot inc guide but the github pages is broke and i couldn't find it anywhere else. Is this guide moved somewhere else ? submitted by /u/ESBAGY [link] [comments] [► Source]

I have python 3 installed and still am getting this error https://preview.redd.it/vjjj4dod92lb1.png?width=958&format=png&auto=webp&s=341ed3d08c7eefba14351c00b8c1eb918df2e6c2 submitted by /u/AdamXReditor [link] [comments] [► Source]