iATKOS | United Kingdom

Hello everyone, I was setting up a dev environment (flutter) on my machine and ran into some problems. Long story short, I decided to back up all important files and reinstall Ventura (13.6.3) in order to get a fresh start. After making the installer usb on my Macbook, I copied the EFI folder from the (then) working installation and proceeded to boot from it into the installer with out issues. After wiping the ssd and reformatting it to APFS, I tried to install macOS, but received an error that halted the installation. Upon rebooting, I was met with the error in the title which has a solution here which did not work. So I found the binary of HfsPlus.efi , replaced the file, then opened the config.plist, deleted the corresponding entry, and did an OC snapshot (ProperTree) before replacing the EFI on the drive with the newer modified EFI. This did not work, so I repeated the process with a clean OC snapshot which failed to boot with the same error. I want to stress that the only modifi...

Hello everyone, please i need your help asap!! My macbook pro mid 2012 was running for a couple of months fine with bigsur, and recently i was getting after i turn on my laptop open core legacy update, but i didn't update it so it won't lead to some problems, and yesterday when i tried to turn on my laptop after i give my password and press login it freeze on loading bar, i tried so many so many solutions none of them works for me, And when i try to turn it on using verbose mode i get this, and it freeze as you see in the picture, Please i need your help guys, i have files and works to be done. I tried the solutions, reset nvram ... , replug ssd ... submitted by /u/K1reem_IlevArt [link] [comments] [► Source]

This is what most looks like an error message out of the thousand of lines that the Monterey install spews out - after 20+ re-boots, it looks the same every time. Is there any way to get this log as a file? submitted by /u/Magnofficial [link] [comments] [► Source]

I am installing Ventura on my MacBook Pro 11,1, and am upgrading the stock SSD to a new one with an adapter . When installing Ventura via USB, it gets stuck in a boot loop where it brings me back to the install ventura screen. When I enter recovery mode, the SSD does not show up when internally installed but does when plugged in externally. I have tried other SSDs but have the same issue. I was able to install ventura on the SSD externally, but it would not recognize it when moved internally. Any suggestions? submitted by /u/Comfortable-Heron-72 [link] [comments] [► Source]

Anyone know why spotlight doesn’t work if I click command+ space? I’ve disabled Siri in settings. (Only work if I click on the icon in the upper bar) submitted by /u/Dependent_Dig_6774 [link] [comments] [► Source]

Can anyone tell me that latest nootedred working ? For me it's black screen. submitted by /u/laxman0805 [link] [comments] [► Source]

OCLP has ben shitty on my Mac. Lagging and unsesebel. The oldest version i Can Pick is “ Big sur”. When i complety reset my Mac i am also stuck But om “ lion “ submitted by /u/NFT_thougths [link] [comments] [► Source]

Hello everyone, I've had an issue that's bugging me and no true solution or reference found on-line. Running Ventura latest 13.6.4 on Intel NUC10i5FNH (OpenCore 0.9.5 etc.) and since Montery, I have enabled passkeys (via "auto-fill" as requested via Keychain) on my iCloud account, including my iDevices. However, from the first use as I remember, the prompt on websites (that support passkeys obviously and on which I have created one e.g. Amazon, in this example) do not prompt me for any kind of authentication. After creating a passkey on Amazon, eBay, etc. on Safari, which is stored OK in my Keychain and sync'ed across my Apple ID account-linked devices, on my hackintosh I am offered to use the passkey without any method of authentication whatsoever (in view of the obvious lack of Touch ID). Is this normal, expected? Should I stop using passkeys as my hackintosh is not protecting them? This Support article doesn't help much, and passkeys apparen...

Hi, I read through this page around GPU compatibility and came across the agdpmod=pikera boot prompt for Series 5000 GPUs. I only find threads around this in the hackintosh sub-reddit so I’m not sure whether this also applies to Mac. My plan is to upgrade my Mac Pro 5,1 to Monterey using OCLP and then getting an RX 5700. And if this also applies here, is there a guide on how to achieve compatibility? Thanks so much for your help! submitted by /u/Flat-Ad-5816 [link] [comments] [► Source]

After following Dortania's guide, I tried installing Big Sur 11.2 basesystem.dmg / 11.4 full-offline installer with OpenCore, I get past the Apple logo and end up on a grey screen where I can't move my cursor. My specs are: Latitude 7480 core i7-6600U skylake graphics 520 video controller 14.0" QHD 2560 x 1440 256 GB SSD WDC OC EFI Structure: ├── ACPI │ ├── SSDT-EC-USBX-LAPTOP.aml │ ├── SSDT-PLUG-DRTNIA.aml │ ├── SSDT-PNLF.aml │ └── SSDT-XOSI.aml ├── Drivers │ ├── HfsPlus.efi │ └── OpenRuntime.efi ├── Kexts │ ├── Lilu.kext │ ├── VirtualSMC.kext │ ├── VoodooPS2Controller.kext │ └── WhateverGreen.kext ├── Tools │ └── OpenShell.efi ├── config.plist └── OpenCore.efi Has anyone had luck with this setup? Any advice or tips would be greatly appreciated. submitted by /u/Pitiful_Simple2777 [link] [comments] [► Source]

So I am trying to boot to the installer trough opencore but when I select 1 (the usb) nothing happens, what can be wrong? My laptop is elitebook 840 g2 with i5 5300U. I am trying to run MacOS Big Sur. submitted by /u/No_Device_5974 [link] [comments] [► Source]

I have two 12,1 imac's running Ventura 13.6 via OLCP. I am having issues with the photos app on both machines. I see all photos as a thumbnail fine. when I expand or double click on a photo, it views for a split second and then disappears (goes blank). Additionally, if I choose one of the thumbnails and export, the exported photo is just a black image. I have rebuilt the photos library a couple of times via Command + Option keys on startup of photos. Doesn't help. Any advice or troubleshooting hints appreciated. ​ submitted by /u/mattve [link] [comments] [► Source]

I have a Xeon E5-1603 with a GeForce 210 not even running macOS Monterey rn. After "patching" the system (more like placing nvidia tesla kexts in /System/Library/Extensions) and removing the VESA boot-arg, it gets halfway through the progress and then shuts the screen off and kernel panics off-screen because the panic logs are saved somewhere in the preboot partition and it gives me the screen that the system "rebooted because of a problem". I've tried the High Sierra installer which natively supports Tesla chipsets, same behavior. I could send you my config.plist if needed. submitted by /u/Potential-Training-8 [link] [comments] [► Source]

I'm new to the hackintosh I trying on a prebult hp elitedesk 800 g1 twr Specs:- cpu:- i5 4570 gpu:- rx 570 sapphire nitro + ram:- 8gb ddr3 1666 installer usb:- 8 gb submitted by /u/Pure_Actuator_755 [link] [comments] [► Source]

Hi everyone. This is my first time trying to hackintosh my first PC. I tried to boot up from my USB (opencore) and select install macOS Ventura, and ends up with this error: https://preview.redd.it/fxbixlulzsfc1.jpg?width=2048&format=pjpg&auto=webp&s=c97fcbcdc953cbf0111e7ed864558015f7c553f2 I have no idea what error is this. Maybe something like i need to fix my Kexts files or review my config.plist? Please help submitted by /u/ZigirigiDOOM [link] [comments] [► Source]

I recently updated from Big Sur to Ventura on my laptop hack and bluetooth works fine just like Big Sur. Except for one thing, after sleep, you have to toggle it off and on again or use the command sudo pkill bluetoothd for it to work or else it shows toggled on but can't connect, so I assume it has some issues with starting up bluetoothd after wake. Sometimes however, bluetooth completely fails to start/connect to devices even after the on off toggle or using sudo pkill bluetoothd and the OS needs to be restarted. But if instead of rebooting the OS, if we force quit WindowsServer, which automatically logs you out of the system and kills all apps/processes, the bluetooth process is restarted and works again.Not sure if this is a known issue as I couldn't find much around. I'm also not sure if force quitting WindowsServer causes any significant downsides as the only thing I know is that it is related to display and as far as you don't have any important process/ap...

I've tried installing Sonoma, Ventura, Monterey and Big Sur onto my 27" iMac 2011, each fails at a different stage of install, with different errors each time. I did manage to install Catalina using DosDude's patcher, which ran extremely slowly and is no good to me anyway as the main thing I want is a working Homebrew. My iMac is only 4GB. I was intending to upgrade IF the installation works, but could this be stopping the install from completing successfully? submitted by /u/Magnofficial [link] [comments] [► Source]

​ https://preview.redd.it/e83zi0cmusfc1.png?width=687&format=png&auto=webp&s=05d452814b77caaddba4f020dae8a5fa2d64b00d submitted by /u/Techgeek_025 [link] [comments] [► Source]

Mojave - Gigabyte X570 Aorus Master - Vega 64 Has been my video editing machine for years. Just swapped new CPU in. Boots but GUI is a little laggy and video is stuttery in iMovie. Havnt changed my boot usb and used same BIOS settings. submitted by /u/Emotional-Hair6337 [link] [comments] [► Source]

Stuck on this window with progress bar at like 20% . Tried rebooting nothing helps submitted by /u/Cell-Senescence [link] [comments] [► Source]

OpenCore itself boots fine but when I try to boot the macOS installer via the builtin UEFI, the displayed image gets corrupted and then the Computer reboots. When booting via Duet, it does start booting the macOS installer and shows text on the screen however it freezes at some point. I'm trying to do this on a Dell Precision T3600 with a Sandybridge-EP Xeon E5-1620, an MSI GTX 650 and Quadro K620 and 4 x 4 GiB DDR3 @ 1600 Mhz. ​ Here is a log I got after booting OpenCore via the builtin UEFI: 00:000 00:000 OC: Setting HW_SSN F5KJ9TYHP7QM - Out of Resources 00:057 00:057 OC: Setting SSN F5KJ9TYHP7QM - Out of Resources 00:114 00:057 OC: Setting FirmwareFeatures FDAFF066 - Out of Resources 00:172 00:057 OC: Setting ExtendedFirmwareFeatures 00000008FDAFF066 - Out of Resources 00:226 00:054 OC: Setting FirmwareFeaturesMask FFFFFF7F - Out of Resources 00:280 00:054 OC: Setting ExtendedFirmwareFeaturesMask 00000008FFFFFF7F - Out of Resources Here is one I got from booting via D...

I installed macOS ventura using opencore only if I try to put a different resolution (supported by my Mac) the windows immediately become very small. Advice? submitted by /u/Dependent_Dig_6774 [link] [comments] [► Source]

What are good places to go to diagnose failures? I tried to install Ventura on my iMac 14,2 (late 2013) with a Fusion Drive. I never got something that could boot. (To set technical level, my first OS installation involved typing 20 words of hex on the Vax console.) submitted by /u/u8589869056 [link] [comments] [► Source]

Hardware CPU : Intel Core i5-1035G7 iGPU : Intel Iris Plus Graphics G7 Memory : 16 GB 3733 MHz LPDDR4X Storage : 256 GB NVMe SSD HFM256GDGTNG-87A0A Display : 15" 2496x1664 Current status Component Status Notes CPU ✅ iGPU ✅ Audio ✅ USB ✅ Touchpad ✅ Keyboard ✅ Battery ✅ Bluetooth ✅ Front camera ✅ Working with USB mapping. Graphics Acceleration ✅ WiFi ✅ Airdrop, Handoff, Sidecar are not working. This is a known issue for itlwm . Touchscreen ❌ You can fix it by installing certain software, but I don't need it. Sleep ❌ Cannot wake up from sleep. submitted by /u/Live_Country [link] [comments] [► Source]

I created a bootable USB drive using the GUI app, the build logs correctly show the Legacy Bluetooth support kext, however once I get to the Monterey installer, I get stuck trying to connect my Apple Wireless Keyboard (MC184D/B). They keyboard does however work in Mojave as well as in the bootpicker, I’m even able to do NVRAM resets but the Monterey installer doesn’t seem to recognize it. Did I do something wrong? submitted by /u/Flat-Ad-5816 [link] [comments] [► Source]

Guide: If you're experiencing high CPU usage on NootRX with MacOS Ventura, particularly when the GPU is underutilized, follow these steps to troubleshoot and potentially resolve the issue: 1. Check GPU Drivers: Ensure that you have the latest GPU drivers installed for your graphics card. Sometimes outdated or incompatible drivers can cause the GPU to be underutilized. 2. Configure Graphics Settings: Access the graphics settings in MacOS Ventura and configure them to prioritize GPU usage over CPU for rendering tasks. You may need to adjust settings related to graphics acceleration or hardware acceleration in system preferences or specific applications. 3. Update Applications: Ensure that all applications, including NootRX, are up to date. Sometimes software updates include performance optimizations that can help alleviate high CPU usage. 4. Verify GPU Utilization: Use monitoring tools or utilities to verify the utilization of your GPU. This can help confirm whether the GPU is indeed...

Guide: If you're experiencing slow Wi-Fi speeds on your Hackintosh T480 running Ventura, follow these steps to troubleshoot and potentially resolve the issue: 1. Check Wi-Fi Card Compatibility: Verify that the Wi-Fi card in your T480 is compatible with macOS Ventura. Certain Wi-Fi cards may require additional drivers or patches to function optimally. 2. Update Wi-Fi Drivers: Ensure that you have the latest Wi-Fi drivers installed for your Intel Wi-Fi card. You can try updating the drivers or using alternate drivers to see if it improves performance. 3. Adjust Wi-Fi Settings: Access your Wi-Fi settings and adjust parameters such as channel width, frequency band, and roaming aggressiveness to optimize performance. Experiment with different settings to find the best configuration for your network. 4. Disable Power Saving Features: Disable any power-saving features on your Wi-Fi card that may be causing it to operate at lower speeds. This can often be done through device settings or th...

Once I download macOS ventura with opencore (I chose this version to avoid slowing down the Mac with Sonoma) I can safely install root-patches as well right? submitted by /u/Dependent_Dig_6774 [link] [comments] [► Source]

how do i get the touchpad on a hp255 g8 to work. These are the kexts I installed submitted by /u/palladinoandrea [link] [comments] [► Source]

Guide: If you're encountering crashes and experiencing a boot loop with a Samsung SSD 970 EVO Plus on Sonoma Hackintosh, follow these steps to troubleshoot and potentially resolve the issue: 1. Check Drive Health: Use disk utility software or Samsung's SSD management tools to check the health of your SSD. Look for any signs of degradation or potential hardware issues. 2. Firmware Update: Ensure that your Samsung SSD has the latest firmware installed. Sometimes firmware updates address compatibility issues and improve stability. 3. Verify System Compatibility: Confirm that your system hardware and firmware are compatible with the Samsung SSD 970 EVO Plus. Check for any known compatibility issues with Sonoma Hackintosh or your specific motherboard. 4. Check SATA/NVMe Configuration: Ensure that the SATA or NVMe configuration in your BIOS/UEFI settings is properly configured for the Samsung SSD. Verify that the drive is recognized correctly and configured for optimal performance. 5...

Guide: If you're looking to breathe new life into your old Core Duo MacBook from 2006, there are indeed a few options you can explore beyond its original macOS Snow Leopard. Here's a guide to help you consider your options: 1. macOS: While your MacBook is limited to running Snow Leopard (OS X 10.6) officially, there are ways to potentially install older versions of macOS using workarounds or patches. However, compatibility and performance may vary, and it's essential to proceed with caution as these methods may not be officially supported. 2. Linux: Linux distributions are a popular choice for reviving older hardware like your Core Duo MacBook. Lightweight distributions such as Ubuntu MATE, Lubuntu, Xubuntu, or Linux Mint XFCE Edition can offer a modern and functional computing experience while being optimized for older hardware. 3. Other Operating Systems: You may also consider alternative operating systems designed for older hardware, such as FreeBSD or OpenBSD, which can...

Guide: Installing macOS Sonoma on your Acer Helios 300 PH315-53-527E laptop can be achieved with careful preparation and following the necessary steps. Here's a guide to help you through the process: 1. Prepare the macOS Sonoma Installer: Download the macOS Sonoma installer from the App Store on a Mac system. Create a bootable USB installer using software like GibMacOS or createinstallmedia. 2. Gather Necessary Files: Download the required EFI folder for your laptop model from Hackintosh community forums or repositories. Ensure you have the necessary kexts for your hardware components (e.g., Wi-Fi card, Ethernet, audio, etc.). 3. BIOS Settings: Access your laptop's BIOS settings by pressing the designated key during startup (usually Del or F2). Disable Secure Boot, Fast Boot, and TPM. Set SATA Mode to AHCI. 4. Configure OpenCore: Install OpenCore bootloader to your USB installer. Configure your config.plist file with appropriate settings for your hardware. Pay attention to ACPI...

Hello Good day! anyone have EFI for the same laptop specs? I want to install Mac Os Sonoma submitted by /u/ButterscotchFluid896 [link] [comments] [► Source]

I’ve got a decent system running that I’d like to put some money into to see if I can boost performance and keep it up to spec for another good couple of years if I can.Specs are, Intel i7-7700 CPU (4 x 3.6GHz) Gigabyte H270M-D3H 2 x 16GB 2400MHz DDR4 RAM SSD - 2 x WD WDS100T3X0E Western Digital WD Black SN770 1TB Gen4 NVMe SSD HDD - 1 x WD WD101FZBX Black 10TB 3.5' HDD SATA 6gb/s 7200RPM 6gb AMD RX 5600 XT Video Card Corsair Carbide 100R650W Corsair PSUBlack DVDRW I run Mac OS Monterey currently for most of my work/home life, I use Premiere and After Effects primarily. But honestly probably get the most grunt out of the Windows side playing games, and that’s where I’d be keen to upgrade. I had this setup built by a mate a few years back and through trial and error have picked up the basics. I shifted from Clover to OpenCore and have upgraded the OS a couple of times now, so I think I’ve got my head around how to mitigate most disasters. Or at least how to actually have ...

Hello everyone ! Sonoma is installed on my system. But my wifi and Bluetooth adapter don't support it. And for this I need a new usb wifi and usb Bluetooth (if such a thing is possible). Which usb adapter is supported for sonoma? Can I run airdrop? submitted by /u/Sweaty_Insurance7238 [link] [comments] [► Source]

have a weird issue in which the first boot fails and the PC restarts . The second boot or attempt is good however. the build itself is very stable once its booted. only thing perhaps that is finicky is something the brightness keys will not turn on automatically or at all. the kernel panic seems to related to VirtualSMC but I'm not entirely sure of how to go about fixing it. {"timestamp":"2024-01-31 00:43:32.00 -0500","bug_type":"210","os_version":"macOS 12.6.6 (21G646)","incident_id":"E01182B0-BED0-42C1-80E9-CC81EEBF24C0"} {"macOSProcessedStackshotData":"bm8gb24gZGlzayBwYW5pYyBzdGFja3Nob3QgZm91bmQgaW4gY29yZWZpbGU=","macOSPanicString":"panic(cpu 6 caller 0xffffff8013319529): [default.kalloc.16]: element modified after free (off:8, val:0x0000000000000002, sz:16, ptr:0xffffff903929e620)\n 8: 0x0000000000000002\nPanicked task 0xffffff9038fb6670: 114 threads: pid 0: kern...

I've already installed macos on my laptop but after updating it to ventura it get stuck on subsystem key string submitted by /u/AttentionVegetable [link] [comments] [► Source]

submitted by /u/themacmeister1967 [link] [comments] [► Source]

Guide: If you're experiencing a boot freeze at "EndRandomSeed" after updating the BIOS on your Gigabyte X570 Aorus Master Hackintosh, follow these steps to troubleshoot and potentially resolve the issue: 1. Disable SetVirtualMap: Access your config.plist using a plist editor like Propertree or any text editor capable of handling XML files. Locate the SetVirtualMap quirk under the Kernel section and set it to Disabled . This quirk is known to cause compatibility issues with certain BIOS versions. 2. Reset BIOS Settings: Boot into your motherboard's BIOS settings and reset all settings to their default values. This ensures that any misconfigured settings are reverted. 3. Check BIOS Compatibility: Verify that the BIOS version you updated to (F35) is compatible with your specific motherboard model and hardware configuration. Visit Gigabyte's official website to confirm compatibility. 4. Verify Other BIOS Settings: Double-check other BIOS settings that are important ...

Since Saturday I have been trying to get MacOS Mojava to boot on my X1 Carbon Gen 1 I5 3427U 4Gig Ram 180Gig ssd 1600x800 It has not worked at all i had previous success with my T430 but not with this does anyone have any tips or advice or a place to find a EFI? submitted by /u/Educational_Web_9520 [link] [comments] [► Source]

I'm currently running Sonoma 14.3 and have no problems with updates until this point. . Today I saw 14.4 beta 1 was available and I felt brave and gave it a try. It went through the entire update process from Software Update with errors of any kind and after the last reboot went through the "9 Millennia Reaming" as usual and when it was done went to the desktop as expected, However upon checking the version it was still at 14.3 and the Software Uodate was letting me know 14.4 Beta was still... Read more [► Source]