iATKOS | United Kingdom

I installed MacOs Monterey on my device by OpenCore EFI folder and have a problem with audio device it's not working. I tried many times to solve it Laptop: dell Inspiron 14 5447 CPU: intell core i7 4210u (Haswell) GPU: Intel HD Graphics 4400 Audio: Realtek ALC255 submitted by /u/CharacterBuilding374 [link] [comments] [► Source]

Hello, I'm debating whether or not to upgrade my Late 2013 13" MacBook Pro to macOS Sequoia. I'm still on Ventura, which runs great, but when I upgraded to Sonoma in the past, I noticed more crashes and lag in graphics. Should I stay on Ventura, or is Sequoia more stable than Sonoma, and should I make the jump? Here are the specs of my machine: 2,4 GHz Dual-Core Intel Core i5, Intel Iris 1536 MB, 8 GB 1600 Mhz DDR3, 256 GB SSD submitted by /u/maxsimonse [link] [comments] [► Source]

My laptop's iGPU is not supported but has a TB4 and not sure if using an eGPU can get graphics acceleration on internal display? submitted by /u/typical-guyy [link] [comments] [► Source]

submitted by /u/MartinOrtizA [link] [comments] [► Source]

submitted by /u/Kilobytez95 [link] [comments] [► Source]

Something goes wrong here and I can’t figure out why. First there was an issue getting High Sierra on the machine from online recovery but that was fixed by changing the download url in nvram from https to http. Then there was the issue that OCLP 2.0.2 couldn’t write the Sequoia install to my USB drive(s) which I worked around with by using my MacBook Pro. After that I build and installed OCLP to the usb drive on the iMac, selected OCLP and then chose for the USB drive to install Sequoia. So far so good I assume. After ‘12 minutes left’ the iMac reboots to a black screen with a back button, an off button and a frozen mousecursor. At this point I can’t do anything expect reboot to OCLP and then an “install sequoia” “SSD” of the regular USB drive again. First option brings me back to the described black screen, second gives a big No logo and the third only gives me the option to start the installation again (recovery). Any ideas or tips? submitted by /u/ohimfinereally ...

On sequoia with oclp 2.02 with my mid 2011 27” iMac. Had no problems with wifi until I replaced the HDD with an SSD. submitted by /u/saml08 [link] [comments] [► Source]

Last built a Hackintosh 5 years ago, ended up selling it. Recently thinking of building a new one, but from memory it took me AGES to debug and get all the right drivers. If there are signs of Apple Intelligence being supported. I will no doubt dive back into the Hackintosh game, but can’t seem to find any news… Anyone? submitted by /u/rayrayronald [link] [comments] [► Source]

OK - been running Sonoma 14.7 just fine for some time. Decided to try Sequoia. Took a spare SSD and loaded Sequoia on to it. After OCLP 2.0.2 added all of the legacy patches, internet/bluetooth etc. work just fine. However have an interesting 'glitch'. While system shows correct time (PDT) location is Kabul. Seems no way to change. Any ideas?? submitted by /u/Cinelli101 [link] [comments] [► Source]

Hi all. } I would like to know if there are low profile AMD gamer video card models. 8GB or up. Could you tell me the models? I want to build a hackintosh with a mini itx case and I need a low profile video card. The need for 8gb or up is because I want to install Mac (development, adobe etc...) and Win (games). Thanks submitted by /u/ar_silva [link] [comments] [► Source]

I keep getting the error saying the network is weak and sync is paused. How do I bypass that warning and make it sync? submitted by /u/MDMIlkMan [link] [comments] [► Source]

Okay so, I have been using opencore for years now And I decided to upgrade my SSD. Doing so I went through a completely clean install on the SSD. During this process I keep running into this screen asking for Magic Mouse or Magic Keyboard. The moment this pops up my USB keyboard and mouse become completely unresponsive. My keyboard and mouse work completely fine right up until I get to this screen Did I miss a step, or is there something else I can try ? submitted by /u/M628 [link] [comments] [► Source]

So, I'm using kde. I've used that one tool that automatically makes your opencore drive, and you just put your efi and kexts in, however, I've come across a roadblock. The drive won't open in dolphin, I don't know what I did wrong, but I need some help, thanks! submitted by /u/7upDrinker [link] [comments] [► Source]

My specs are: CPU: i7-6700HQ 2.6GHz RAM: 16 GB 2133 MHz DDR4 iGPU: intel HD graphics 530 HD: 512 SSD Everything is working in Monterey btw but just want to upgrade submitted by /u/thedalor [link] [comments] [► Source]

I have an early 2015 MBP 13" 12,1. I have Sonoma which was installed on a wiped, stock 512gb OEM Apple SSD. OLCP 1.5 is installed. Works great! Since I have space, I was thinking of trying to install a windows installation via BootCamp. Has anyone done this and if so, how does it run? I'm worried about breaking something since the Mac part works really well right now. TIA submitted by /u/abraxis_us [link] [comments] [► Source]

Hi everyone, I've run into an issue with trying to install root patches on my Mac pro 4,1 (flashed to 5,1). I edited the boot args to get the root patches menu to allow me to continue, but now it says it can't patch because there's an update that pending. There aren't any updates going on and I've tried restarting a few times just to be sure. I even searched for processes with 'update' in the name in activity monitor and quit those, just in case. Still no luck. I was able to do it without any issues before when I had a different graphics card, so I'm not sure what's going on. Any tips? submitted by /u/silversaga123 [link] [comments] [► Source]

submitted by /u/Velocity211 [link] [comments] [► Source]

https://preview.redd.it/510t0k8pqsrd1.png?width=2560&format=png&auto=webp&s=ef59fcf390ba7112d729e1b9565ce4cb14a1aca0 * Hardware: CPU: Ryzen 7 3800XT GPU: RX 580 8GB Sapphire Motherboard/Laptop model: Asus Prime B450M Screen(s) Number: 2 Screen(s) Resolution: 1440P + 1080P Audio Codec: EC0887 Ethernet Card: Realtek Wifi/BT Card: (if available) Cheap WIFI card (Ubit 12000) that i found but it has a Intel7265 Card on it. Fenvi T919 is coming soon * What guide/tool I followed: Dortania * What part I got an issue with: It's not really an issue but I think my RX580 is under-performing. I have got 20k score on Geekbench so i'm not too sure if that's good. I've seen some others that have gotten higher but not sure how. * What files/config I am using: Kexts: Airportitlwm AMDRyzenCPUPowerManager AppleALC AppleMCEReporterDisabler Lilu RealtekRTL8111 RestrictEvents SMCAMDProcessor USBPorts VirtualSMC WhateverGreen Drivers: AudioDxe Ext4Dxe HfsPlus OpenCanopy Open...

submitted by /u/rylenm8 [link] [comments] [► Source]

Hi everyone, I've installed macOS Big Sur on my iMac 12,2 using OpenCore Legacy Patcher. Everything works fine except for some screen flickering around transparent objects (like windows or menus). specs: CPU: Intel i7-2600 GPU: AMD Radeon 6970M 2GB Has anyone experienced this issue before? Is there a specific setting I should tweak for the graphics card to fix this? Any help would be appreciated! Thanks in advance! submitted by /u/AL-H [link] [comments] [► Source]

I can't find my AppleALC codec in the list, am I doing something wrong? Can you tell me which codec the audio devices correspond to? Thanks in advance. submitted by /u/_DavidGamer_ [link] [comments] [► Source]

I was trying to back up time machine, but after a while it the screen just blanks. I couldn’t do anything unless i hard reset. Any work around? Thanks! submitted by /u/BeautifulLet1740 [link] [comments] [► Source]

Has anyone also lost the ability to change brightness after updating to Sequoia? Processing img 7o2kyqdrasrd1... submitted by /u/RazorPNG [link] [comments] [► Source]

did anyone else notice this? my mac would overheat like hell when sleeping and all of a sudden its resolved after updating to sequoia. submitted by /u/mybrainisdefective69 [link] [comments] [► Source]

The install dies on the below text, then i get the stop circle (link to pic : https://cdsassets.apple.com/live/7WUAS350/images/macos/macos-startup-circle-with-slash-circle-with-line.png ) 23:639 00:200 AAPL: #[EB|STOP] 0x16 23:847 00:208 AAPL: #[EB|H:IS] 0 24:047 00:199 AAPL: #[EB.G.CS|-?] Ok(0) 24:236 00:188 AAPL: Displaying boot failure graphic for 10 seconds... 34:449 10:213 AAPL: Displaying text console for 10 seconds... submitted by /u/mrmyrth [link] [comments] [► Source]

I have created the installer. After restarting 2 times this is what I'm stuck on. It just restarts. submitted by /u/xkumropotash [link] [comments] [► Source]

Okay, It’s not that bad—it lasts for about an hour or less at most. I've tried a lot of things: changing kexts, loading new ones, deleting the old ones, and I’m still not sure how to fix this. Yes, I've already mapped the USB. Not to mention it runs kinda hot. My guess, power is not managed properly. Ive noticed it takes quite a lotta time for fans to shut down on sleep. I'M ON SONOMA 14+ ENTIRE EFI: https://www.dropbox.com/scl/fo/bl5lo1xp7djlwf92y6eul/AIPUADPPDc0HSSN8H_KwwLQ?rlkey=sl6bs2zpt9ka6h35hb1wihjxq&st=47z79hn9&dl=0 Issue: Extremely bad battery life. Run very hot. Boot args : -v debug=0x100 alcid=11 keepsyms=1 swd_panic=1 -hbfx-disable-patch-pci hbfx-ahbm=35 darkwake=0 -nredvcn DELL INSPIRON 7415 Hardware: CPU: AMD Ryzen 5 5500U (6-core) GPU: Integrated AMD Radeon Graphics RAM: 8 GB DDR4 Storage: 512 GB M.2 NVMe SSD Display: 14-inch Full HD (1920x1080) LED-backlit WVA touchscreen Ports: 2 x USB 3.2 Type-A 1 x USB 3.2 Type-C...

I just installed Sonoma on my 2010 iMac 27" (11,3) and it went well for the most part, took a couple tries to get it to install, but it finally did and now loads fine. I did the post-install root patch and the only thing it found to patch was Wi-Fi, which it did and is now working fine. For some reason the wallpaper is still just white though. I checked the "About this Mac" and it is displaying my graphics card, so I think that all synced fine... just can't figure out why it won't render the background. Also, it is incredibly laggy. Everything (so far) is working, but it's taking forever to do it. It was faster when I was still running High Sierra. Any ideas on how to fix these issues? Maybe I did something wrong, I'm not sure And yes, I have a 1Tb SSD submitted by /u/BlackShadow2804 [link] [comments] [► Source]

I have the usb installer created and I am looking for a PC that is pretty much ready for install without hardware modification needed. I don’t want to build a PC from scratch. Cheers, Howard [► Source]

J'ai mis à jour mon iMac 27" fin-2013 vers et je suis dans l'impossibilité de changer mon fond d'écran qui reste noir. Une idée ? submitted by /u/rchapl [link] [comments] [► Source]

Ive been trying to get this to work for a while as i have a spare HP machine laying around and macOS would give it a second chance at life (hp prodesk 400 sff, i3-8100, intel uhd 630 graphics, z270 chipset). During the first part of the boot process the machine acts like normal (verbose mode output on the screen and it isnt locked up), however when the setup is meant to initialize its graphical stage it just blackscreens and locks up (complete blackscreen, input not even detected by the monitor). I know that this is a common issue on machines like this but i really have no idea how i would even go by fixing it (i have set the correct bios settings, here's a link to them and here's a link to my config.plist file ). Any help would be greatly appreciated. Thanks in advance. submitted by /u/xyz-dev [link] [comments] [► Source]

submitted by /u/esean_keni [link] [comments] [► Source]

Hello, I am new to hackintosh Have been using mac OSX since 10 years ago though. I have a desktop PC with a ryzen 7 7700x, integrated GPU only, no dedicated GPU. The mobo is a msi pro b650-p if that matters. I currently run a windows 11 with it. Can i dual boot a macOS X on it? Or it’s better to get a virtual box / vmware running mac OSX? Main purpose is to try React Native and Swift running on the IOS simulator. If no luck i’ll just try using expo to my iOS device. Thanks! Any advices appreciated 🙏 submitted by /u/DistrictNo5220 [link] [comments] [► Source]

I have an Tplink UB-400 dongle. It worked in Sonoma but after the update to Sequoia it stopped working. I have the BlueToolFixup, BrcmFirmwareData and BrcmPatchRam3 Kexts installed. Resetting the NVRAM doesnt work. CPU: AMD Ryzen 5 5600x GPU: AMD Radeon rx 6600 Motherboard: MSI b550 gaming plus submitted by /u/entenbraten007 [link] [comments] [► Source]

submitted by /u/benasan [link] [comments] [► Source]

I have installed Sonoma with itlwm and heliport app. Everything was working fine expect iMessage and facetime. I wanted to give it a try with Airportitlwm. Is there any specific version supported for Sonoma 14.7 ? https://github.com/valnoxy/t480-oc/tree/main/EFI/OC/Kexts - I see only two kexts one for 14.0 and .4 Thankyou!! submitted by /u/chandu26 [link] [comments] [► Source]

hackintool Hey everyone,   I'm running an i7 10th Gen Hackintosh with an RX 580 GPU and the iGPU set to headless. I have a dual-screen setup, and my system was working flawlessly on macOS Ventura. Recently, I decided to upgrade to the latest macOS version. Instead of just doing an upgrade, I opted for a fresh install, but that’s where I ran into issues.   During the fresh install, I started noticing significant GPU glitches. At one point, while trying to do something graphics-intensive (not gaming, just modifying an image in the browser), I got red artifacts covering the entire screen. After troubleshooting without success, I decided to go back to Ventura and upgrade to Sequoia instead of a fresh install. Now, everything is working perfectly, even with dynamic wallpapers and my dual-screen setup.   I should mention that all my kexts and OpenCore itself have been upgraded to the latest version. The OpenCore config I used for both the fresh install and the upgrad...

I installed Sequoia successfully but I cannot shutdown my machine and it always restarts then and displays a message to request to send an error to the Apple. I use the same EFI configuration as did on Sonoma and I don't get any error on it but the Sequoia is not able to shutdown. Of course, I also updated all kexts and OpenCore in latest version. Does this issue ring a bell with anybody and could you please give me a direction? Thanks a lot submitted by /u/fyshun [link] [comments] [► Source]