iATKOS | United Kingdom

A very common issue when multibooting macOS/OS X with Windows and Linux is that after installing the latter the computer will only boot to them. The reason for this is that Clover does not automatically add itself to the UEFI firmware boot menu that is accessible by pressing F12 or another hotkey. When no other operating systems or boot managers are present the computer will automatically start Clover from the UEFI fall back path at EFI\Boot\BootX64.efi which may be present on the menu as an... Read more [► Source]

Hi, I have a Clover hackintosh with Mojave, with Intel ethernet, Gigabyte motherboard. Ethernet worked fine until today. The only thing I changed was that I disabled “wake for ethernet network access” and disabled wake on lan in bios. After this the computer first wouldn’t turn on, but when it did, it doesn’t have internet access. I get a random ip address and notification that it’s not connected to internet. I changed enerything back, but still no internet connectivity. I do get the lights... Read more Author: hrenovka [► Source]

My build has 2 separate NVME drives, one for OS X Monterey and another for Windows 10. I originally created the Windows disk using boot camp, then deleted boot camp and ran it with Parallels for the last 4 years. I updated open core and I can still boot Windows 10 from the opencors picker menu no problem. Unfortunately I can no longer boot the same partition from Parallels. I now get this error: I set it up something like this as best I can remember: Create a new VM... Read more [► Source]

Can someone post a screen shot of the files that are in their boot camped windows EFI partition please? [► Source]

Hi guys,like in the title i have a problem with an hackintosh,perfect in every aspect,with that characteristics: i7 10700k Asus Prime Z490A Crucial Ballistix 4000Mhz 64Gb 2x Ssd nvme I have a little (but very bad) problem,if i start the pc with only the hdmi cable connected i don’t have any problem,i use a 29” lg ultrawide with a very fantastic experience. The problem is that,i use a second screen for work and when i plug the DigitalPort cable (with the pc already ON) i can use booth with... Read more Author: iMhack [► Source]

hi i have a problem with instaling big sur on my device and i dont know why it jump outs and i try montrey but in montery says support.apple.com/mac/setup can you help me here is my efi Author: aroot [► Source]

Hi Guys, In case you wonder how to fix USB and have 100% it working at full speed of USB 2.0/3.0/3.1. Here are kernel and kext patches to be set in Clover Configurator at KextsToPatch tab: Name Find HEX Replace HEX Comment com.apple.iokit.IOUSBHostFamily 83FB0F0F 83FB3F0F USB Port Limit Patch 1 DalianSky com.apple.iokit.IOUSBHostFamily 83E30FD3 83E33FD3 USB Port Limit Patch... Read more Author: ZdzislawPomata [► Source]

Ok. So I have ditched Clover for OpenCore and I'm excited from the positive responses and testimonials of the ease of use and stability of OpenCore. A little background. I built my Hackintosh a few years ago, used Clover and installed Catalina. When it was time to move to Big Sur, I could never get it to take with Clover so I said F' it... lets start from scratch. So I have followed the Dortonia guide and created my bootable USB. I formatted the Hard Drive and slid the USB into the... Read more Author: jimmyjames1stad [► Source]

Hi. Following on from this post https://www.tonymacx86.com/threads/dell-precision-5820-xeon-w2125.263298/page-9 I'm trying to install MacOS BigSur (11.6.0) on my machine (Dell 5820, Intel Core i7-9800X, Radeon Pro WX4100 GPU) I'm stuck in this place right now. Can anyone help? Author: holdy89 [► Source]

Hi! I need help with a rather old system. I experience very bad cpu performance since upgrading to Catalina. I'm a music producer working in Ableton Live and Logic Pro. I suddenly have a lot of crackles and dropouts although when monitoring Intel Power Gadget the Cpu barely runs over 1ghz. Also got a very poor Geekbench score compared to when i was running Sierra. My system: z170x Designare Intel Core i7-6700K 64.00 GB 3000 MHz DDR4 Intel HD Graphics 530 1536 MB UAD Apollox4 thunderbolt... Read more Author: Torpedvin [► Source]

Board:Lenovo thinkcentre m83 CPU i5 4670 Graphic:4600 First time to try install hackintosh on my old pc lenovo m83 first error show appleKeyStore: operation failed wait after five minutes second error come put com.apple.displaypolicyd abnormal code I have no ideas what going on change smbios platform info can see white apple. After that, back to above situtation here my m83 efi with opencore file Author: techasst [► Source]

Hello, I have problem with ASUS prime Z370-A, intel cpu 8700k at 11.2 big sur with 0.6.6 opencore. Otherwise all are fine except sleep. When i press sleep all the time hdd led flash goes to black screen and then never awake. I have to push reset to reboot and goes into mac os big sur again. Is there any solution for this? Author: sissyfos [► Source]

Hi all, running Catalina on Clover for several years, all is working great! Now tried to remove Clover and switch to OC. Done all configuration's per OC Coffee lake guide on EFI, now cannot boot... When boot, receive: OpenCore Boot Menu (REL-078...) > 1. Reset NVRAM [Restart][Shutdown] and that's it... What have i done wrong? I have my old EFI backed up, ill try to restore to it. Author: kyury [► Source]

Slugnet's Video Editor GA-Z77X-UD5H / i7-3770k / 16GB RAM / GIGABYTE GeForce GTX 660 Ti ​ Components Gigabyte GA-Z77X-UD5H Motherboard http://www.amazon.com/gp/product/B007R21JK4/ Intel Core i7-3770K Quad-Core Processor 3.5 GHz 6 MB Cache LGA 1155 - BX80637I73770K http://www.amazon.com/gp/product/B007SZ0EOW/ GIGABYTE GeForce GTX 660 Ti WINDFORCE 2X OC Edition 2048MB GDDR5 PCI-Express 3.0 2x DVI / HDMI / DP SLI Ready... Read more Author: slugnet [► Source]

I installed Windows 10 on a new SSD. I already had Catalina on its own SSD for the same system. So... If I put BOTH of those back in, I am assuming that the Windows Boot Loader and my OC EFI will leave each other alone. And, if selecting the macOS boot EFI as default in BIOS, OpenCore 'should' recognize the Windows Boot Loader...Right? But, with the required BIOS settings for Catalina and Windows being so different, how do we manage the situation without changing the BIOS settings each time? [► Source]

Hello Everyone! I recently got the Dell Vostro 3888 & wanted to install Mac OS on it. I did install Mac on other computers, but I really don't know where to start with this Desktop. ***** Desktop Specs: Dell Vostro 3888 Intel Core i5 - 10400 12 GB Ram (DDR4 - 2666 Mhz) 1 TB Seagate HDD Intel UHD 630 Realtek High Definition Audio Intel Dual-Band Wireless-AC 3165 ***** Thanks! Author: HassanElDessouki07 [► Source]

Fresh install catalina on M90P. After install, it will boot fine when using usb and selecting the hdd with catalina installed. Sometimes it won't boot and will freeze and different points during the loading bar screen. I tried install multibeast after install and when rebooting for the first time, it won't boot fully, freezes again randomly except it never gets to the desktop. Author: sabregreen [► Source]

Hi everyone, Not my first rodeo doing a Hackintosh, but my first time ever doing a Ryzen Hackintosh. My system specs are as follows: CPU: Ryzen 5600X Motherboard: Gigabyte X570 Aorus Elite Wifi GPU: AMD RX 6900 XT SSD: Samsung Evo 970+ 1TB (Firmware has been updated to the latest) (I am not installing to this drive at all. Using a 256GB SanDisk SSD) I am trying to install MacOS Big Sur 11.6.2 onto my machine using Opencore 0.7.8. Every time I go to install, no matter what kext I update, I... Read more Author: IndoCanuck [► Source]

Hi all, I am new to the Apple game but recently fell in love with the architecture! I am trying to load macOS Catalina on my NUC7i7BNH or NUC10i3FNH. Currently, I am trying the NUC7i7BNH. If you think using the NUC10i3FNH would be better, let me know! The NUC7i7BNH has the following specs... PU: Intel® Core™ i7-7567U Processor Graphics: Intel Iris Plus Graphics 650 INTEL SSD 120GB RAM: 8GB x 2 DDR4 2133 MHz I am following the "UniBeast: Install macOS Catalina on Any... Read more Author: tonythetech412 [► Source]

OpenCore: 0.6.3 sleep: ok network: ok wifi + ble: not ok audio: ok xmp: ok Author: zshchou [► Source]

So I am moving from Clover to OpenCore because no matter what I try, I cannot get Big Sur or Monteray to install. I'm running the newest version of Clover and the newest version of configurator so at this point, I am finished. However, as I'm trying to get OpenCore ready for the switch, my configurator shows absolutely nada in sections like ACPI, SMBios and so forth and I'm wondering what in the holy hell is going on. I mounted my hard drive and I can see the EFI but when I go to those... Read more Author: jimmyjames1stad [► Source]

OpenCore: 0.6.3 sleep: ok network: ok wifi + ble: not ok audio: ok xmp: ok Author: zshchou [► Source]

Thought to bring this build up-to-date for anyone still using this motherboard (which I first started with Sierra here more than 4 years ago) > [SUCCESS] Sierra 10.12.5 + GA-Z170N-WIFI + P600 NVME + GTX560Ti This is a guide for installing OSX Sierra 10.12.5 onto the Gigabyte GA-Z170N-WIFI boot using an Intel 600P 512GB PCIE NVME and a Nvidia GTX 560 Ti card. If you don't have a NVME card or a Nvidia card this guide can still work for you - simply bypass those steps. COMPONENTS Gigabyte... www.tonymacx86.com I now have it working from Catalina all the way to Big Sur 11.4. I've made a number of changes to the build, biggest change of which is, it is now running using Opencore 0.6.1. I have also since changed... Read more Author: Middleman [► Source]

Hey, in general it looks like this, I try to boot my nvidia card in the system high sierra, but no matter what I do, I still have a black screen, unless I use “nv_disable=1” in the boot parameters, installed the latest drivers, I also restarted nvram... but still black screen, literally my monitor turns off and “no signal” appears on the screen Whatevergreen also installed and Lilu My PC: CPU: I7 9700k GPU : GTX 1070 Mobo : Z390 Gaming X My EFI Folder i link too Author: Mariok8 [► Source]

Dear members, I've installed a JHL7540 Thunderbolt card in my computer. Now Hackintool shows the device but System Information says "Thunderbolt: No drivers are loaded." How do I load drivers for this card. Do I need to use Kexts or do I have to change SSDT? I'd be very happy to read helpful replies. Thanks in advance! Author: Enzo.F [► Source]

Dear tonymacx86 Community, I need some advice before I take the big shot in upgrading my OSX in dual boot (osx & win10 on separate SSDs) system from Sierra to Big Sur. First things first: Is a direct update possible without out a complete reinstall? Hardware wise: I presume that I won't be able to use my GTX960 anymore and have switch back to on-board Intel® HD-Grafik 530? Can this support a WQHD monitor over the Z170i Display port in Big Sur? Software wise: I have my clover boot loader... Read more Author: eisenhornet [► Source]

Hello, I'm trying to install Catalina 10.15 with OpenCore's Guide and when i try to boot in it just shows text and then shows a black screen, and when i check the logs it says 11:031 00:045 AAPL: [EB|`B:WFDW] Err(0xE), 0 @ LocHB 71B4903C-14EC-42C4-BDC6-CE1449930E49 . CPU: Intel I5-8600 (8th Gen, Coffee Lake) GPU: GTX 1050 OS: Windows 10 Here's my EFI and my OpenCore logs files Author: ChdML [► Source]

I'm attempting a fresh install of Big Sur / OC on an Optiplex 3040 Micro - i5-6500T/H110. There's a success thread here but op offered no additional details. A few seconds after booting to the installer from OC it freezes, always around the same lines.. "AppleFSCompression.. kmod start" & "calling mpo". I've found posts that suggest this may be graphics related. I followed the Dortania Skylake desktop instructions, but I'm not certain about the graphics portion, thinking perhaps I... Read more Author: cc9920 [► Source]

i have a hp 8200 on high sierra with a 710 graphics card. it works fine, but the OS is too old to use a lot of the application i need. i'm finding very old tutorials for installation of high sierra , but nothing on catalina or later OS versions. is there a current (2022) install path or update path for these 8200 desktops ? thanks ! Author: ohgood [► Source]

I am getting following error while installing Big Sur on Pentium Dual Core g3240 with Nvidia gt 710 please help Author: vinukn335 [► Source]

Hello there, I have had a (quite) working hackintosh for nearly 2 years now on a T480s, this is my first and I'm really happy about it. I used Clover and some config I found in a github repo back in the day (the repo has been deleted since). Problem is, it won't update from MacOS 10.14.1, this is my work's computer and I didn't bother until recently when compiling tools started warning me about upcoming lack of support. I fiddled with Clover config with no luck, my current version of... Read more Author: Alkaaran [► Source]

hello everyone, My hackintosh build keeps on crashing while using app like davinci resolve studio (4k rendering/using open fx) . i9 10core 3.7Ghz memory 32gb 3600 MHz DDR4 Graphics Radeon RX 6800XT 16GB Author: iamvishnu03 [► Source]

Hello, I am trying to install macOS Catalina and no matter what I do, Disk Utility (I've also verified with Code: diskutil list in Terminal) does not detect any SATA drives. AHCI is enabled in the BIOS. I followed the Dortania OpenCore Install Guide. I tried: - a lot of kexts (SATA-Unsupported, CtlnaAHCIPort, AHCIPortInjector) - resetting the BIOS and configuring it properly for macOS Booting from or installing on USB drives works. I have attached the EFI folder. Thanks in advance. Author: gabi256 [► Source]

Hello everyone, I'm pretty new to all this and I've been fighting this issue for a week now and I can't seem to find any solution. I was running my Catalina build until it completely froze and had to do a force restart. I have Clover bootloader but I believe my SSD used opencore to boot. From the moment I had to force start, the computer started going straight to the BIOS and never boot up again. So I created a USB install of Big Sur to try to upgrade and fix this issue. I've successfully... Read more Author: ch5342 [► Source]

Hey all, I'm currently on Mojave, prepping to update to Big Sur. Got all my ducks in a row in terms of updating firmware, patching ACPI after firmware update, and making sure all my apps are 64bit compatible. Now the hard part. I have tried multiple system definitions from iMac Pro 1,1 to iMac 18,1 18,2 18,3 19,1 19,2. All of these clear the verbose boot stage but then the monitor shuts off as if its no longer getting a signal from the GPU (AMD RX580). If I go back to 14,2 then everything... Read more Author: Krow01 [► Source]

Hi All! Finally making the jump to Catalina from Mojave (after a software upgrade means I now need to upgrade the OS). Having tried every option possible with no luck (never ending dead ending on the 1689 issue), I decided to revert to my original idea of a completely fresh install to a new, untouched 1TB SSD. The process so far: To play safe, I downloaded an old install of 10.15 I built a Unibeast USB Catalina installer (on a Samsung 32Gb USB) successfully. But when the time... Read more Author: playforest [► Source]

Cheers recently I discovered this great family I had been wanting to run man on my pc for a long time and here it seems quite possible to do it I have a pc with requirements I think enough intel i3 mainboard, non-integrated ATI graphics but not like that a sleepless night trying to install mac on my hp but the usb does not boot it is in ahcii the usb boot bios I just lacked trying to create the usb with unibeast take the other option different from ahcii. Thank you, I hope you help me in my... Read more Author: litri [► Source]

Hello everyone! Sorry for my English. Help me please!( I install Mojave 10.14.6 100 times and never finished. 1) I tried with UniBeast, but after selecting the bootable USB, a black screen with a dash. Clover Bootloader won't load. 2) via BDU, problem repeat. 3) via RDrive. happened! but now the flash drive freezes on loading and produces a distorted log with a prohibition sign in the center (see screenshot). I used the command in Clover Bootloader -no_compat_check. The strange... Read more Author: v.sabirov [► Source]

How do you get network drivers to do repair? Or how do you place them if the mac won’t boot? Can you repair from usb installer? I tried but it only gives install option not reinstall. Author: sabregreen [► Source]