iATKOS | United Kingdom

A lower powered version Kaby Lake processor. This machine is so quiet, I can't hear the fan running. The PCIe M.2 SSD works flawlessly at x4. Plenty of performance for a server that stays on all the time. This is a computer that has no comparable Apple product, so no SIMBIOS is a perfect match. Fortunately, WhateverGreen and Lilu handle everything. Strangely, the 'About this Mac' reports a Core i7 processor. Probably something to fix within ACPI, but it's purely cosmetic. CPU: I3-7100T with... Read more Author: 1rocketdude [► Source]

Followed the OpenCore directions exactly. (Actually one mistake because I didn't read the installation directions carefully enough. I corrected on my second try.) I am nowhere near as experienced as many who have done this. It took many hours of reading and research but was worth the effort. This is a clean install on a new SSD because the Catalina installation I had was a mess. (kexts in /library/extensions and in Clover) All kexts are now in my OpenCore efi. SMBIOS 15,1. ... Read more Author: simonsaba [► Source]

Hi! Is there a way to get the onboard TB work on tnis machine: Mojave @ gigabyte z490 aorus xtreme ? I wanna use it with my Universal Audio UAD-2 TB3 (no Apollo, just DSP). UAD-2 Satellite Thunderbolt 3 DSP Accelerator | Universal Audio Hol Dir authentischen Analog-Sound von Neve, API, Manley, Studer, Helios, Lexikon und anderen über Thunderbolt 3 für Mac oder PC. Erfahre mehr. www.uaudio.de I need to stay on Mojave coz of some specific 32bit hardware I use. Thanks. Author: davorr [► Source]

This is not particularly related to Mojave only. I'm having the same problem with Sierra and High Sierra. When I follow the directions to create the install USB (to a T) it takes about 20-25 minutes and then says it was successful. When I reboot into clover the USB drive does not show to be a choice to be selected. I have an existing El Capitan USB installer and it shows up just fine and installs properly on a partition. So, what could I be doing wrong or is this a system definition... Read more Author: reverendjj [► Source]

Hello everyone, please help me start Ethernet Intel X550 in Big Sur operating system. I have an Asus X99-E-10G WS motherboard that has two 10G ports that run on an Intel X550 controller. In Catalina, everything worked for me, got it working with kexts: - FakePCIID.kext - FakePCIID_Intel_GbX.kext FakePCIID_Intel_GbX.kext/Contents/Info.plist Click to expand... - SmallTreeIntel8259x.kext But unfortunately SmallTreeIntel8259x is no longer developed and Catalina is the last operating system... Read more Author: maxix1234566 [► Source]

Using OpenCore (0.8.6), keyboard and mouse work in the graphic menu, but when I get to the installation menu, nothing works. I know that Big Sur made some changes talking about USB ports, but what are they and how do I fix them? I tried USB mapping Spoiler Gathering files | OpenCore Install Guide and adding the patch that was on Dortania Spoiler OpenCore and macOS 11: Big Sur | OpenCore Install Guide but it didn't work. I'm... Read more Author: tertaco [► Source]

Hello everyone! MacOS Catalina was working fine on my laptop but after updating to Big Sur, the sleep mode doesn't work. It never goes to sleep and when i try to put it to sleep mode it suddenly restarts the mac os. Here I have attached the necessary files. And also why the latest clover does not show the big sur boot volume rather than the preboot volume? Any help would be so appreciable Thanks in advance Author: ayz9314 [► Source]

I'm trying to install MacOS on my machine CPU - Intel Core i5-10400f GPU - GT 710 Motherboard - Gigabyte H410M S2 V2 RAM 16gb DDR4 2666MHz And it comes up with this error: #IEB.LD .LFIIN] 0 1 <*<null string)"> <*1*> "[EB .B.SBS |SZ1 739896 #[EB IB :SHA ] <bc0a873db6d0ea0e3c53e8e613a8cc781a5d3cfe> #[EB. WL . PWLFNV | ! 1 Err (OxE) <- RT .GV wake-fai lure 7C436110-AB2A-4BBB-A880-FE41995C9F82 #[EB .WL .DTI !] Err (OxE ) <- EB.WL .PWLFNV # [EB IWL T 1 0x10bbb3b1 #[EB.LD .LKCIR .1]... Click to expand... Read more Author: Duonic [► Source]

I did follow the guide for installation on a new SSD Sierra. Here's what i get. Anything i can do? Author: Ccuccu [► Source]

Hi! I am having a problem after the installation... After selecting macOSinstaller the pc restarts... I don't have much more information about this, I leave a txt file that appears in the root of the usb Author: n1ki [► Source]

Hi all, I have just upgraded the hardware on my old GA-x99-UD4 Core i7 5820k GTX970 that has been running happily for years on clover and High Sierra as my main production machine. Because of recent changes to the Apps I mainly use in my work, and not being ready to get a completely new machine (economics are not solid) I found a used proc (Core i7 5960x) and GFX card (Radeon rx5700xt) that will allow me to update to at least Big Sur. Of course as you all know Clover = deprecated and... Read more Author: s34b4ss [► Source]

This following patch allows root hub port limit over 0xf to 0x3f. Patch 1 Comment: USB port limit patch 10.14.x (credit ydeng) Name: IOUSBHostFamily Find: c20200e0 83fb0f Replace: c20200e0 83fb3f This need to be used together with AppleUSBXHCI patch published elsewhere ( https://www.tonymacx86.com/threads/solved-mojave-10-14-1-update-lost-usb-3-0.264125/ ). Patch 2 Comment: USB Port limit patch 10.14.1, 10.14.2,10.14.3 Name: com.apple.driver.usb.AppleUSBXHCI Find: 00 00 83... Read more Author: ydeng [► Source]

Hi every one. I have Asus p8z68-v-lx motherboard and Intel i7 Sandy Bridge CPU (2700K). I install Big Sur and its work very clearly. I tried many hackintosh installation but this is best.. I used OpenCore boot loader. I attached EFI folder. Good luck. Author: karahan_zorbey [► Source]

I've not done another Hackintosh build for a while since Mojave and I often forget all the procedures. I've created my Catalina unibeast install stick. It begins the first part of the install OK, then the normal reboot. Got to the continuing install after reboot and after a couple of minutes it crashes to a black screen, reboots and I get a warning the bios has been reset. I have to then go into bios and change back the settings from ide to AHCI. But then I have to start all over, but can't... Read more Author: leonado [► Source]

My config: intel core i3 10105f Gskill trident Z 16 Gb 3200 gigabyte z590 aorus pro ax rev 1.0 geforce gtx 670 Hello everybody, i have a problem with installation mac on my PC after upgrade. Could somebody help me create boot flash with my config Beforehand Thanks Author: vovanic80 [► Source]

I try to install Catalina on my Z490 using MacPro 7,1 using a OpenCore 0.8.5 USB Stick. The USB Stick is 32 GB, I reduced the partition to 20 GB. The Installer loads, shows the first Apple Logo, Screen turns grey and the again the Apple Logo. After the Apple Logo the screen turns grey again and it shows me an error log file. I can't get around this error and I don't know what it means at all. Please see attached config.plist and error message. Any idea? Author: madman1234 [► Source]

I have a running OpenCore 0.8.5 with Ventura on my Z490 Board. I would like to map my USB ports and therefore I would like to install Catalina. I created a Catalina USB Stick liked described in Dortania, but if I boot with the stick, it doesn't show me the "Install Catalina" option in the boot menu. What is wrong here? I also tried Unibeast with Clover, there I can see the external Install Catalina, but it get stuck after a couple of seconds if I chose this option. So I really would like... Read more Author: madman1234 [► Source]

i get this "virtualsmc efend: @ authenticated restart support is unavailable" Author: baret [► Source]

Clover (5130) detects all disks (I dualboot Windows and macOS), but in Disk Utility there's nothing, no disks, no volumes, only installation USB. Did anyone have such problem and how do I fix it? During Catalina installation IOATAFamily.kext solved the issue, but it panics on Big Sur for some reason. Kexts: - AAAMouSSE.kext - AtherosL1cEthernet.kext (internet) - FakeSMC.kext - Lilu.kext - telemetrap.kext - WhateverGreen.kext Motherboard: ASRock G41M-VGS3 CPU: Intel Core 2 Duo E8500 GPU... Read more Author: tertaco [► Source]

Hello! cause of my old Motherboard i am still on Catalina (latest plus latest security fixes) i am still quite happy with it, even if it‘s getting old. Updating to Big Sur is no option cause of components which wouldn’t work anymore. To my problem: I have a asmedia 1142 USB-C PCIe which worked really good over the last years. Everything worked fine. I recently bought a 5bay USB-C Drivecase Vendor Icy-Box which offers five independent slots for sata drives (‎IB-3805-C31) Problem is, that... Read more Author: ApexDE [► Source]

I cant seem to find the installer to install big sur I have downloaded big sur to my OS X computer Author: pressure [► Source]

Giving new life to old hardware. I put this ITX motherboard on the shelf a year ago when I couldn't upgrade it past High Sierra using Clover. Borrowing an OC 0.8.5 configuration from another user and making modifications to iron out the wrinkles. Posting here in case anyone else has vintage hardware that still runs everything I need, including functioning as a trading platform, a database development machine, and a media server. Gigabyte GA-H97N-WiFi Intel Core i3 4330 16 GB... Read more Author: 1rocketdude [► Source]

Hi. Following on from this post https://www.tonymacx86.com/threads/dell-precision-5820-xeon-w2125.263298/page-9 I'm trying to install MacOS BigSur (11.6.0) on my machine (Dell 5820, Intel Core i7-9800X, Radeon Pro WX4100 GPU) I'm stuck in this place right now. Can anyone help? Author: holdy89 [► Source]

I decided to build a Hackintosh to run Catalina as software that I use it is the highest I can go. I do video editing and audio. I wanted a fast computer with lots of RAM and a beast of a video card. I looked long and hard at components and based my decision on Mac compatible. I choose a Gigabyte Z490 Vision D motherboard with a i9-10900, 128GB RAM and a Radeon Vega 64 Frontier Edition 16GB video card. This combination produce a Mac Pro killer for a whole lot less money... Read more Author: cbushjr56 [► Source]

I decided to build a Hackintosh to run Catalina as software that I use it is the highest I can go. I do video editing and audio. I wanted a fast computer with lots of RAM and a beast of a video card. I looked long and hard at components and based my decision on Mac compatible. I choose a Gigabyte Z490 Vision D motherboard with a i9-10900, 128GB RAM and a Radeon Vega 64 Frontier Edition 16GB video card. This combination produce a Mac Pro killer for a whole lot less money. Anyway to get on... Read more Author: cbushjr56 [► Source]