iATKOS | United Kingdom

Can someone give me some advice on this current install? I'm using "EFI for Catalina" from @Middleman and I can't seem to finish. The install gets to about 2 minutes left and then restarts. I attached an image below of the message that flashes before restarting. After it reboots, if I select my Samsung SSD I am installing to, it will throw up what I'm guessing is an error (2nd image attached). I keep getting that same error if I continue selecting my SSD drive at boot. I'm... Read more Author: szalayfilm [► Source]

As many people have been running system-definitions - the model of Apple Mac your Hackintosh is emulating - which will no-longer be supported under Big Sur, if you would like to upgrade when the time comes you will need make some changes to your config.plist . I've been happily running system-definition iMac14,2 for many years but this is an old Mac model which will not be supported going forward with Big Sur. So I need to prepare now. To get this thread started I'll show you what I... Read more Author: UtterDisbelief [► Source]

It's been a long time since I immersed myself in this world. I needed to upgrade from high sierra, but then pandemic times came, there was no GPU available and I had to stick to the issues with the old software, but NOW, finally! I already changed my GPU to a Radeon RX 580 and I'm preparing for the os update (I'm scared! hahaha). First, I need to change my system definition (Clover), from iMac 14.2 to iMac 15.1 I have some guides here to follow, but I need to know how I can backup my boot... Read more Author: Alcatraz6 [► Source]

Hello my catalina system is working quite well, however I randomly have this message at statup (screen attached)... a little stressful, has anyone experienced this before ? Here are some general steps you can take to troubleshoot this issue: Check Your Config.plist: This file contains all the settings for OpenCore. Ensure that it's properly configured for your system. Using a tool like ProperTree or OpenCore Configurator can help validate your configuration. Update OpenCore and Kexts: Make sure you're using the latest version of OpenCore and that all your kexts (kernel extensions) are up to date. Sometimes, issues are fixed in newer releases. Verify Boot Arguments: Check the boot arguments in your config.plist to ensure they're appropriate for your system and there aren't any typos or incorrect settings. Check ACPI Patches: If you're using any ACPI patches, make sure they are correct and necessary for your system. NVRAM Reset: Sometimes, clearing NVRAM can resolve ...

Hello Anyone that can help med I'm stuck at boot an can't boot in safe mode either. I am running Clover boot loader with internal graphics on Catalina. Everything worked perfectly for a long time until my kids turn of the power to my pc then the bios got messed up but got it working again by updating the bios and then it worked for a while and now I hade to do a hard restart because nothing was working and know I get get in anymore. Author: peste [► Source]

Motherboard: H61MLV2 VER.9.0 CPU: Intel E3-1230 v2 GPU: AMD Radeon HD 7900 Series The attached screenshot shows the clover log. I am using clover 5123 because a higher version of clover results in a blank screen. Can someone please help me? Author: CuitePiglin [► Source]

I am trying to install BigSur on Microsoft Surface pro 4. I made it work up to the install screen but can't make it work keyboard and track pad. It work in clover but when it boot up the bigsur Recovery keyboard/track-pad does not work. I have 1 USB so another keyboard and mouse out of option and my docking station also don't work on it. i got the product id and vendor info but can't find the info how to add in it? Motherboard Model: Surface Pro 4 Manufacturer: Microsoft Corporation CPU... Read more Author: shaz385 [► Source]

Hi there. I am currently on Mojave 10.14.5 and more and more sites and programs are telling me nothing under 10.15 will be supported. Safari stopped working on a ton of sites long ago, Plex as well, Chrome just popped up the other day saying no more upgrades, etc. This computer used to be my daily driver, Plex server, and security center, and now it's just a Plex server as my M1 Mac Mini does my daily driver stuff. I am looking to do 1 more upgrade and then be done with it since this isn't... Read more Author: hackintoshhelp2020 [► Source]

Hey i have downloaded Mac os big sur on my sandy bridge system But there is a problem its stuck at 1280x760p and yes i have tryed disable display app but it doesnt work and every other resize app doesnt work either.... could anyone help me? Author: NicolasH [► Source]

My hackintosh drive got wiped so i am trying to reinstall it but i keep having the same problem, no matter what i do. I have set up the USB boot drive for installation and it opens to clover boot manager but everytime I select the install macOS partition it just freezes then and there. Not even a black screen, just frozen with the partition still selected. I have been fiddling with my drivers, my kexts, my config.plist to no avail and I am thinking now the problem might be somewhere else... Read more Author: SlitherSlow [► Source]

submitted by /u/xCuri0 [link] [comments] [► Source]

I tried to create my own custom EFI following the guide on dortania.github.io, but it didn't work for me. I will provide you with a link to the specifications of my laptop, the EFI folder, and the error I encountered. Specs: HP ENVY x360 15 (15-dr) - i7-10510U · MX250 · 15.6”, Full HD (1920 x 1080), IPS · 256GB SSD PCIe NVMe · 8GB DDR4, 2666 MHz · Windows 10 Home | LaptopMedia.com EFI Folder: https://drive.google.com/drive/folders/1NfcuPXV360LxQ5stdIa1OsLBPZ-MibYh?usp=sharing ​ https://preview.redd.it/wqzakk1rcb5b1.jpg?width=4032&format=pjpg&auto=webp&s=70cec2a9978f5f66d728134c3a9c7e0d3548ccfc submitted by /u/Time-Copy3193 [link] [comments] [► Source]

I installed Ventura but I'm unable to Boot to finalize the install. EFI and log. https://pixeldrain.com/l/kmRDJQD3 submitted by /u/Automatic_Skill3644 [link] [comments] [► Source]

Very happy, because at first it had some screen glitches (fixed), I need to see options and refine it, for example, sound its not working because I still didn’t try more alcid options. Specs: Hp 840 g2 Cpu: i5 5200u Gpu: Intel hd 5500 Ram: 8gb ddr3l Wi-Fi/Bluetooth: intel card (it works both) Touchpad and trackpoint: synaptics (both works) Bios ver. Last available as 10/06/23 Opencore 0.92 submitted by /u/joaqocifmorz [link] [comments] [► Source]

MY pc: i5 10600k B460m pro 4 ram 16gb oc 0.9.2 card wifi bcm94352hmb OS: bigssur -> 13.4 ventura When up 13.4. I cannot use bluetooth. PLS help me submitted by /u/ngaithon [link] [comments] [► Source]

Audio output devices is not showing in Catalina . if I change config and restart it is not booting Author: RAHSL [► Source]

Ive marked these ppl since last year,they"ve been following me and pressing on my stuff,they got all the proof,wired my house with cameras,some fucker is hearing what im saying through my little brain and can send me his thought"s when he is write"ing,its insane,hard too belive but its true,need some help since they are harrasing me for month"s and they are trying too make me a mad man,but cant ;) Need help submitted by /u/Independent_Main_254 [link] [comments] [► Source]

Idk what I'm doing wrong. I made a Open Core USB, with Big Sur and it just won't boot. I did make it through Rufus though, and I remember that part of setup said to choose the unbootable option, but still. Help. It could be cause I'm using a decade old HP G72 and trying to run Big Sur, but I just can't find what I need to do. submitted by /u/UmbreonEspeonJolteon [link] [comments] [► Source]

Hi, I am trying to upgrade from catalina to Big Sur but I got this red text saying a bunch of code, here is the screenshot. Author: awsomeguy1445 [► Source]

I'm running Ventura 13.4 on my 5900X + 6900XT (connected through Display Port). From the display settings, I can not select any refresh rates other than 60Hz and 30Hz. It doesn't seem to matter whether I turn off HDR or switch to lower resolutions: the high refresh rate option stays missing. I can run high refresh rate in both Windows (with the same GPU) and on my M2 Pro (connected to the same display). Do you have any idea what the issue could be? Please let me know if you require additional information. Thanks. submitted by /u/e4109c [link] [comments] [► Source]

running bigsur. Everything works fine except when I try to run some graphic programs. I get a black area where the picture should be. This also happened when I installed chrome. I had to turn off graphic acceleration. Any ideas how to resolve this. submitted by /u/No-Ad-4666 [link] [comments] [► Source]

this card usually runs natively in Ventura. But now with the arrival of Sonoma it will be pushed aside. Will any kexts appear for these WiFi/BT cards? submitted by /u/Cuervo_loco_ [link] [comments] [► Source]

Will i have any issues trying to do SW development in xcode on a hackentosh using OpenCore? also how would i be able to install apple applications like xcode on a hackentosh without accessing the app store ? ​ sorry for the noob questions submitted by /u/SpiritedGrapefruit60 [link] [comments] [► Source]

​ I was following this guide, I updated my bios to 1601 and used their EFI. I tried 2 USB (one with Ventura other has Monterey) https://github.com/rafaelmaeuer/Asus-Z590-P-Hackintosh ​ Both halfway through the Apple logo my display loses signal and turned black and says no signal. I tried 1 with a display port monitor and another monitor with HDMI both did the same thing. ​ Anyone have an idea why this happens and what I can do to fix this? ​ ​ submitted by /u/swiggyu [link] [comments] [► Source]

submitted by /u/elpsykongr0 [link] [comments] [► Source]

submitted by /u/lowpolyfoxai [link] [comments] [► Source]

Used some Russian made tool to make a clover USB tried multiple sticks and multiple boot options always hangs on power Management submitted by /u/RekaAia [link] [comments] [► Source]

I made a Hackintosh with a 3070TI and I was wondering why it’s stuck on 8MB VRAM in the about Mac section and has no graphics acceleration submitted by /u/ComprehensiveTrip781 [link] [comments] [► Source]

this happens when im trying to boot macOS sonoma, Ventura boots and works cpu:r3 2200g gpu:rx580 msi armor ram:16 gb amd radeon r9 (sorry for bad English, not mine main language) submitted by /u/nikita1945 [link] [comments] [► Source]

I want to know if Hackintosh is possible with an Nvidia GPU yet. I have reached out to several installer services in the past, but no luck. Here's my PC specs if that helps ALIENWARE AURORA R14 Motherboard: CPU Tvde 12-Core AMD Ryzen 9 5900, 4676 MHz (47.5 x 98) Motherboard Chipset AMD B550, AMD K19.2 FCH, AMD K19.2 IMC System Memory DIMM3: Kingston XK2M26-MIE-NX DIMM4: Kingston XK2M26-MIE-NX Video Adapter NVIDIA GeForce RTX 3080 (10 GB) submitted by /u/TheDarknessHasMe [link] [comments] [► Source]

There's someone get successful patching ALC897 to get audio inputs working? I've used every LayoutID supported. I'm using iMac20,1SMBIOS on a Gigabyte B560M. Everything is working except for audio inputs ( it makes me twitching eye) submitted by /u/Rilomagon [link] [comments] [► Source]

Anyone experienced something similar? After I update my laptop (w Intel 9560NGW card) from Monterey to Ventura with latest Airportitlwm ver 2.2.0, wireless screen mirroring doesn't work anymore. Is it because the handoff feature in ver 2.2.0 turned off? submitted by /u/380043 [link] [comments] [► Source]

My system information is Core i7 4790K and motherboard is Gigabyte d3h. It was running big sur fine and recently on boot it is showing this error. I am not sure about which kext is creating issue. Anyone have idea? Author: dpnptl [► Source]

I did a hardward mod on my Thinkpad T480s by swapping out the original Elan one with the one from Thinkpad X1 Yoga 3. At the momemtn it is working fine with the VoodooPS2.kext. I am a bit confused what i need to do next. The only thing not work is Force touch using the touchpad hardware button (the "click" one under the touchpad). Looking at various read.me from voodooSMBUS and voodooRMI, my IOREG says that the synaptics is using SMBus, but when I install VoodooSMBus and VoodooRMI (in the correct order as per this link https://elitemacx86.com/resources/voodoormi.191/ ), my Touchpad doesn't work. ​ BTW, I am using dsdt and not ssdt. submitted by /u/Slow-Reloader [link] [comments] [► Source]

Can you add 2 RX 6950s to double the power? submitted by /u/ScottLA75 [link] [comments] [► Source]

submitted by /u/acopierr [link] [comments] [► Source]

Mozilla has announced that support for Firefox will end in September 2024 for MacOS Sierra / High Sierra / Mojave with Firefox ESR 115 : Firefox users on macOS 10.12, 10.13 and 10.14 moving to Extended Support Release | Ayuda de Firefox Firefox version 115 ESR will be the last supported release for macOS 10.12, 10.13 and 10.14 support.mozilla.org Firefox users on MacOS Sierra / High Sierra / Mojave will be switched to the ESR channel via an "application update". when Firefox 115 is released in July 2023. Then Firefox ESR 115 will be provided with security updates on these operating systems until... Read more Author: Jamesbond007 [► Source]

Hey guys - So I'm running a Hackintosh using OpenCore 0.6.0, which has been stable for a couple years now using Big Sur. A couple weeks ago, I realized that I didn't actually map my USB ports correctly, and watched a video to make them properly using OCAuxillaryTools. The USB ports work perfect now, but I'm also now getting a bunch of error codes popping up when I boot (note: everything still boots up and works fine). Here's what the screen looks like: https://imgur.com/a/NQvAT36 I read a post on here that recommended using OCConfigCompare. When I download a sample plist and compare to my plist, this is the values that it shows as missing: config.plist -> Kernel -> Quirks - Missing Key: DisableIoMapperMapping config.plist -> UEFI -> Quirks - Missing Key: ResizeUsePciRbIo config.plist -> UEFI -> Output - Missing Key: InitialMode config.plist -> UEFI -> Output - Missing Key: GopBurstMode These listing look different than what I'm seeing as...

Hey All, Moderately seasoned Hackintosher (since 2013, 4 updates 2 builds), weak software skills. I decided to take the plunge and attempt to update from Catalina to Ventura as I'm unable to keep up with needed software updates. Following this guide , I updated Clover - (referencing this thread) hoping I wouldn't need to install and learn Open Core. Now computer boots up fine and enters Clover but all my mac os partitions, including the recovery, are inaccessible. Get the... Read more Author: Dunbadn [► Source]

I have a laptop I want to hackintosh to Lion, it has a T7250 which is a Merom CPU, the Dortania guide says I can hackintosh up to 10.11, however the Dortania guide doesn't cover hackintoshing a Merom laptop, I searched the subreddit, and people said to use the penryn guide, however there's no Penryn laptop guide either?? How would I hackintosh this? submitted by /u/Lost-Entrepreneur439 [link] [comments] [► Source]

I'm using AsusSMC and struggling with battery charging, trying to enable battery conservative mode but there's no Battery health button in the settings, which is required to enable that mode according to the docs. Tried Al Dente, Charge limiter but they do nothing. Btw can somebody help me with patching keyboard backlight with AsusSMC? The docs are not available at the moment. ## Specs Model: Zephyrus G14 GA401QH CPU: AMD Ryzen 7 5800HS GPU: Radeon Vega 8 MacOS version: 12.6.6 OpenCore: 0.9.2 (Release) submitted by /u/AlphaNecron [link] [comments] [► Source]