iATKOS | United Kingdom

Help: trying to install mac on core i5-1035g4 mini pc. Followed dortania guide and validated with oc validate , open core 0.8.4 am i missing something in boot arg? Or anything else. Thanks submitted by /u/Bright_Ad_3099 [link] [comments] [► Source]

As said in the title I'm looking for a very chep laptop I can buy in order to turn it into an hackintosh without too much trouble submitted by /u/_ilguido_ [link] [comments] [► Source]

When i try to boot into OpenCore, the list only shows NO NAME, and when i go into that it shows 5 errors Could not read \EFI\ invalid parameter could not find boot options: invalid parameter start_image() returned invalid parameter OC: Boot Failed - invalid parameter OCB: StartImage Failed - invalid parameter Im trying to boot from my USB where I have triple checked everything, from all my folders, to my bios settings, reformatted and remounted the USB several times, tried different USBs, re-did the EFI folder twice. my hardware is listed as compatible (i7-4790, AMD RX570). Tried doing it on and off ethernet. What am I doing wrong? submitted by /u/StationChunga [link] [comments] [► Source]

Hi, All. I am a newbie here and I noticed when I do the geekbech5, the graphic card is merely used. What is it for? My card is Rx6600, do I miss something. Below are my environment and devices: MacOS 12.5 Montery Graphic Card: ASUS RX 6600 8G CPU: I5 - 12400F Motherboard: H610M - A Intel card: Intel AX201 In addition, my also tested my MacBook Air M1, and noticed that the graphic card usage is normal. submitted by /u/Internal-Recover-914 [link] [comments] [► Source]

I'm trying to take 10870h laptop Asus vivobook gaming does anybody have experience with this model... And also do you have a better suggestion... I'm planning to get 10870h as it's 8 cores... Do you have a 10870h hackintosh submitted by /u/External-Sherbet-774 [link] [comments] [► Source]

I followed the OpenCore guide on getting bootcamp set up down to the letter, however I’m getting an “OCB: StartImage failed - Already Started” when trying to boot the BootCamp My Windows and MacOS are on two separate drives each with their own EFI partitions. One called System (Windows) and EFI (MacOS). I’ve tried moving the Microsoft boot files to the MacOS partition and “BlessOverride”Ing in the config.plist, it but it gives the same error. I don’t know what else to do to get it to work. Any tips /ideas Some additional information, I’ve set up FileVault if that influences anything? Idk submitted by /u/darkshinobix [link] [comments] [► Source]

I personally don't use the native macOS top bar, thus the AMDPowerGadget does nothing for me. I created this small CLI to extract the same metrics. Here is an example output. json { "power": 42.80278396606445, "temperature": 50.66667175292969, "max-frequencie": 4199.59033203125, "mean-frequencie": 4188.42919921875 } https://github.com/brorbw/amd-cpu-data submitted by /u/amd-cpu-data [link] [comments] [► Source]

This thread is meant to be a continuation of kgp's original post for users using ASUS X299 motherboards. The goal is to keep the support for these motherboards alive, publish updates, configurations, hardware, and so on. I'd like to thank @kgp for his effort so far and hope he'll be back in the future! I wish him all the best. Update your profile with details about your build. Follow the community rules . /cc @izo1 @ djlild7hina Author: vincek8s [► Source]

Hi all, My current music studio PC is getting too old to run certain plugins and software. The choice is to buy a new machine (but funds are limited currently) or updating. Before diving in to all possible and relevant howtos, I was simply wondering if it is just a matter of cloning the system drive to another disk for backup and running the OSX update function? Should I expect some (or a lot) of hickups, or will it be relatively painless? If it requires me to spend days on it, I suppose... Read more Author: bcnx [► Source]

I have added the device specification. I use 128gb SSD. I would be super thankful if someone can direct me the steps to install the hackintosh submitted by /u/Dense_Lawyer_6877 [link] [comments] [► Source]

I have a hackintosh for like 8 months and recently I couldn’t boot anymore into it. The partition was there and everything seemed to be working, but from a blackout while I was on the hackintosh, it stopped working. I searched and the only thing I was able to do was to insert the bootable usb and keep there while working on it.If I unplug the usb I can’t boot anymore. I used opencore and I have macOS bigsur. Any recovery thing or smt that can help to boot without usb? submitted by /u/Alternative_Ad_8095 [link] [comments] [► Source]

Hi all. As per my profile I have a rebuild from mavericks to Catalina. This machine has an installed ssd and a swap ssd. Shut the machine down and disconnect the data lead and move it to the other ssd. One working drive one practice drive works a treat. Catalina was setup and with Ethernet connected worked fine. Even got the 10.15.7 security 004 and 005 installed. Followed Broadcom WiFi/Bluetooth [Guide] on tonymacx86 site for Wi-Fi part and hey good to go. Swapped drives and made... Read more Author: boxgame [► Source]

Hi, Got an Asus Z270WS with Opencore 0.8 and a Highpoint SSD7204 that works with the Windows side of things but cant get the driver to recognize the card. At bootup each of the 4 nvme drives comes up but I choose to ignore them. Wonder what I have to do to get it working? Noticed that the 1.1.25 highpointnvme kext is loaded in kextstat. Maybe its the DSDT? Thanks Author: moheban79 [► Source]

So Im still using OpenCore 0.6.4 EFI for my XPS 15 7590 running Catalina but Im wondering what are some reasons to update the EFI if I dont plan on updating anythinh further than Catalina and how can I go about it because I feel 0.6.4 is so old? submitted by /u/JX1640z [link] [comments] [► Source]

Hi, I'd like to upgrade my 3 monitor hackintosh setup from my current Optiplex 9010 (3rd gen) using the NVS 510 and running BigSur (OC v0.8.0). I've been unsuccessful in getting this NVS 510 to work in the Optiplex 7080 (10th gen). I can't get any display output when I boot up with this card in the 7080 (using the onboard DP output works fine). Is there something I'm missing? Does this card not work with the 7080 board? If that's the case, what would be the latest Optiplex that I could use... Read more Author: jammin [► Source]

Hello, Does anyone know how to install Sierra on my Dell Vostro 260 i5 Intel Corporation 2nd Generation Core Processor PC? I need like step-by-step instructions. Thanks! submitted by /u/Rare_Menu_9431 [link] [comments] [► Source]

I upgraded my computer to 128gb of ram to do video and graphics stuff. The thing is though, when I go into photoshop and crank up the RAM usage it doesn’t really go further than the 60Gb I had before the upgrade. So I checked in the activity monitor and noticed that suddenly an enormous amount of “wired ram” was being used. Nearly half of the ram is now “wired" and not available for the applications. Is there a terminal command or bios setting to make the ram "unwired" and available to use with all applications? submitted by /u/berlinblades [link] [comments] [► Source]

As of now I know Intel Iris xe is not supported by Apple software right now but was wondering if you think it might be supported in the upcoming OSX? submitted by /u/XDM_Inc [link] [comments] [► Source]

Volume buttons have no effect when pressed. Is there a kext or something to fix this ? ​ I am on Monterey 12.5, my audio card is a M-Audio Fast Track Pro. ​ Thanks submitted by /u/Croquetto [link] [comments] [► Source]

Hi Folks. I swapped an i7-5930k to i7-6950x. Thought it would be a simple upgrade. It wasn’t the case. Running Big Sur with Clover. It doesnt boot :( I would really appreciate some help! Thank you submitted by /u/rubenhak [link] [comments] [► Source]

currently on MacPro7,1 (the most popular one?) and was wondering if there's anything better available submitted by /u/Minecon724 [link] [comments] [► Source]

Hi, I recently followed this guide to allow for OpenCore to work while Secure Boot is enabled in my BIOS, this worked fine however after re-enabling Secure Boot my macOS drive disappeared from OpenCore. Windows 11 still shows up and is bootable but I'd like macOS to be bootable as well with Secure Boot on as going into the BIOS each time I swap OS's is a bit of a pain. I know that enabling Secure Boot is what's causing the issue as disabling Secure Boot makes the macOS drive show up again, which then allows it to be booted from perfectly which leads me to believe that the issue doesn't lie within my config.plist, might be wrong on that though. I am running OpenCore 0.8.4 on my AMD 3600 CPU in an ASUS PRIME X570-P motherboard. Any ideas on why enabling Secure Boot removes the macOS drive from OpenCore? Any help is appreciated! submitted by /u/_Matty [link] [comments] [► Source]

Hi guys, im trying to install macOS big sur using the offline installer, but it got stuck at the apple boot logo. I tried the monterey installer, and it works, but the installer got corrupted and my wifi card don't work with monterey (Atheros AR9287) so i have to switch to big sur. How do i fix it? Thanks. submitted by /u/Cuphead12291 [link] [comments] [► Source]

submitted by /u/bobosVNA [link] [comments] [► Source]

submitted by /u/blackhandedman [link] [comments] [► Source]

Hi, my Macbook Pro have stuck and then shutdown suddenly. I will send the detail above and what should I do to fix this? Thank you. - Macbook Pro 2018 15 inch - Mac OS Monterey ​ panic(cpu 4 caller 0xffffff8009d7999f): userspace watchdog timeout: no successful checkins from WindowServer in 120 seconds service: logd, total successful checkins since load (7860 seconds ago): 787, last successful checkin: 0 seconds ago service: WindowServer, total successful checkins since load (7830 seconds ago): 767, last successful checkin: 120 seconds ago service: remoted, total successful checkins since load (7860 seconds ago): 785, last successful checkin: 0 seconds ago service: opendirectoryd, total successful checkins since load (7860 seconds ago): 786, last successful checkin: 0 seconds ago Panicked task 0xffffffaa33f949c0: 3 threads: pid 108: watchdogd Backtrace (CPU 4), panicked thread: 0xffffff9bceff8540, Frame : Return Address 0xfffffff2c3bfb690 : 0xffffff800687fdad 0xfffffff2c3bf...

Specs:11th gen core i5 1135g7 16 gb ddr4 3200 ram 256 gb m.2 ssd submitted by /u/Chetan1208 [link] [comments] [► Source]

submitted by /u/SyrianTurk [link] [comments] [► Source]

I followed the Dortania guide as well as the advice posted for my hardware here and on Tonymac. I keep getting stuck at this error: AAPL: #[EB|LOG:EXITBS:START] ​ Specs: GIGABYTE Z490 AORUS Elite i9-10850K rx 580 nitro+ Radeon 8gb Samsung 840 pro ​ plist file: https://github.com/hackintosh87/EFI/blob/main/config.plist ​ ​ Extended error log: ​ 34:619 00:044 AAPL: #[EB|SB:MKRN] 34:672 00:052 AAPL: #[EB.LD.LKFS|-?] Ok(0) 34:717 00:044 AAPL: #[EB.LD.LKC|-?] Ok(0) 34:762 00:045 AAPL: #[EB|BST:REV1] 34:807 00:044 AAPL: #[EB|CSR:OUT] 0x00000043 34:853 00:045 AAPL: #[EB.BST.FBS|+] 34:992 00:139 AAPL: #[EB.BST.FBS|ADSZ] 0 35:038 00:045 AAPL: #[EB.BST.FBS|KSSZ] 0 35:083 00:045 AAPL: #[EB|SB:SBGMFNS] j185fap.im4m 35:128 00:045 AAPL: #[EB|RH:PF] usr\standalone\OS.dmg.root_hash 35:173 00:045 AAPL: #[EB|RH:MF] <"usr\\standalone\\OS.dmg.root_hash.j185fap.im4m"> 35:219 00:045 AAPL: #[EB.LD.LF|IN] 0 1 <"usr\\standalone\\OS.dmg.root_hash"> <...

Hey Guys! So I recently decided it was time to upgrade my OC Version from 0.6.4 to 0.8.4. I backed up my config.plist and got to work. Unfortunately I seem for the love of christ not to be able to get it to boot after upgrading. Any help would be greatly appreciated. ​ My system is: Intel i770k Radeon 7 MacOS Monterey (12.0) OC 0.8.4 My config.plist can be found here: Google Drive My last OC log is as follows: 00:000 00:000 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 00:005 00:005 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 00:011 00:005 AAPL: #[EB|H:IS] 0 00:017 00:005 AAPL: #[EB|LOG:INIT] 2022-09-24T13:29:14 00:022 00:005 AAPL: #[EB|VERSION] <"boot.efi 540.100.7~14 (Official), built 2022-02-12T04:08:42-0800"> 00:027 00:005 AAPL: #[EB|BUILD] <"BUILD-INFO[300]:{"DisplayName":"boot.efi","DisplayVersion":"540.100.7~14...

I want to mount the EFI partition, but I don't have it after installing macOS Monterey. Is there anything I can do or add it after installation so I don't need the USB stick to boot anymore? Partition scheme is right. Everything else seems to work... ​ Hackintool doesn't seem to be seeing my SSD though where macOS is installed. It sees my other one. Both are 1TB M2 SSD's. Both can be seen in disk utility however... submitted by /u/Kuyi [link] [comments] [► Source]

They wasted their money buying me an M1 Pro 14 inch. What are the best parts/what budget should i have for a hackintosh, preferrably a ryzentosh? I might try nvidia but not sure, any thoughts? submitted by /u/NoiseOther1478 [link] [comments] [► Source]

Hey folks, This kills me to have to ask since I usually frown at people too lazy to google their basic questions, but I'm lost. I have a Hackintosh, but I didn't build it so I'm not exactly sure what/how it was done. It's a dual boot-- OS Catalina 10.15.7 + Windows 10 ... it's been solid but I've never run a single update in fear of messing things up. Can anyone help me with understanding the risks of allowing updates? be it security patches or even moving up to the latest OS? I haven't updated opencore ever in 2 years now (its still v0.6.3), i'm assuming that is the software that makes OS play nicely with my PC parts? I use this machine for my work and some other important creative projects so I can't really afford any downtime. But in theory is the update process as simple as just "updating the OS" as some users have posted? or do i update -- and then have to install opencore again + any steps Im unaware of? Another question is -- a...

I just bought TP Link ub500, and I think it is not compatible. What should I buy ? Bluetooth to connect my magic mouse with keyboard. Ub400 would fit ? Thanks submitted by /u/Croquetto [link] [comments] [► Source]

This sub is very focused on installing and configuring hackintoshes. I’m keen to hear from people that have been using Hackintosh as their daily driver, what do you use it for ? how long have you been using it ? any regrets ? submitted by /u/Jacksonville9carl [link] [comments] [► Source]

submitted by /u/High_Ass_kite [link] [comments] [► Source]

hi, I have a DELL Optiplex MFF 7060 (i7-8700T) and I have an issue with the sound card (ALC3234) not working. I followed the Dortania guide, but to no avail (all the rest is working). I believe I got it down to the HDEF driver not loading because it cannot grab the IRQ 0x15, which seems to be used by HPET when I check with IOReg. From what I could read here ), it seems that HPET is not needed on MacOS Monterey (as I have an Intel Coffee Lake-8th generation). So my idea was to make a SSDT to disable HPET to free up the 4 IRQs that it's using so that the sound card can grab them. Is this a good idea or not (and how to do that)? I am really confused by the different answers to getting the sound working on Dell computers. Some say we should patch the DSDT, others say to make custom SSDTs... What's best? submitted by /u/SwissOS [link] [comments] [► Source]

Can I resume MacOS online-based installation if the power cut off my PC during installation as I have really bad internet connection that takes almost 2 days to download macOS. submitted by /u/Ok-Leadership-9853 [link] [comments] [► Source]

I’m new in this, so I don’t know what the installer is doing as it shows this for quite some time. https://imgur.com/a/uoiXoHO It repeats itself in those two lines. I’m following Dortania's OpenCore Install Guide, I hope someone can tell what’s going on. My build is: | [CPU][Intel Core i5-10400 2.9 GHz 6-Core Processor] | [CPU Cooler][Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler] | [Motherboard][MSI MPG Z490 GAMING EDGE WIFI ATX LGA1200 Motherboard] | [Memory][G.Skill Ripjaws V 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory] | [Storage][Samsung 860 Evo 250 GB M.2-2280 Solid State Drive] | [Storage][Seagate Barracuda Compute 2 TB 3.5" 7200RPM Internal Hard Drive] | [Storage][Western Digital Black SN770 500 GB M.2-2280 NVME Solid State Drive] | [Video Card][Sapphire Radeon RX 6600 8 GB PULSE Video Card] | [Case][Corsair 275R Airflow ATX Mid Tower Case] | [Power Supply][Thermaltake Toughpower GF1 PE 650 W 80+ Gold Certified Fully Modular ATX Power Supply] | [Monit...

submitted by /u/themacmeister [link] [comments] [► Source]

Is it possible to do AirPlay mirroring on a OpenCore hackintosh laptop? I installed the FeatureUnlock kext, but it didn't work. submitted by /u/CubingSoda [link] [comments] [► Source]

Big Sur fails to boot, restarts immediately after IOconsoleUsers: GIOScreenLockState 3 There's some output after that, but I don't think it's related to those My EFI: Author: DestoryG [► Source]