iATKOS | United Kingdom

A while back an old issue returned when upgrading from Catalina/Clover r5119 to Big Sur/OC 0.7.9 on the Z370M Plus II board* This issue may apply to other Z370 boards - the system does not fully shutdown (power LED light stays on) on shutdown. Clover In Clover there is a simply "FixShutdown" key that can be set to True and worked well on this board: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN"... Read more Author: NZRichard [► Source]

Hello everyone, As some of you know, I have been lurking around to make the new X299X boards (Gigabyte) work, unsuccessful at it, but trying nevertheless. On the hardware side these are the specs of the build: Gigabyte Designare EX 10G Intel i9 10900X 128GB DDR4 3200 Mhz Crucial Ballistix 1200W BeQuiet! PurePower PNY 500GB NVMe And other bits, but the important is here. Trials have been made with Clover v5100 and Catalina 10.15.2 previously installed, the reason because I have... Read more Author: dolgarrenan [► Source]

Can't wait to share with you guys my X99 Asus Rampage with RX vega 64 boots and running smoothly. I tried with Macpro 7.1 and iMac pro 1.1 both smbios. No problem! EFI shared with you. Give a try. Author: shantonu [► Source]

  The next version of the Mac operating system -- currently available as a Public Beta -- is macOS 13 "Ventura". Guides to install this version of the macOS on PCs include: macOS Ventura Beta USB Installation - A quick guide to create a USB installer for macOS Ventura alongside the OpenCore and Clover bootloaders from tonymacx86 . The site covers the macOS Ventura Public Beta Updates , too. macOS Ventura Beta on PC - A basic guide to install macOS Ventura on an Intel or AMD PC using OpenCore from newcomer EliteMacx86 . macOS Ventura Beta on Unsupported Mac - A guide to install macOS Ventura on an older Mac using Hackintosh methods from TechsViewer . macOS Ventura Beta Upgrade from Monterey - A Reddit reader report documenting the successful upgrade of a PC previously running macOS Monterey to macOS Ventura. Note that formal hardware support for macOS Ventura (macOS 13) is more limited than its predecessor, macOS Monterey (macOS 12) , and some features are restricted to...

Hello. Can someone explain to me why an empty EFI disk without a clover boot loader is created after a UniBeast 10.2.0 - Catalina installation is completed on a USB key? Author: AlexK5 [► Source]

I really wanna turn my old gaming pc into a Mac but I’ve tried looking up compatibility lists to no avail can anyone help? Thank you submitted by /u/WilierAgenda789 [link] [comments] [► Source]

Hello I've an optiplex 7040 micro, which is running Catalina finely. But i've one problem, when i'm trying to play a video (from my iphone) i've an error message it's in french i'm sorry: Impossible de lire la video Photos ne pas lire cette video. voulez vous essayer de l'ouvrir dans quicktime player and when clic on OK i've an error code (-101) any idea? Thank you Author: pwetpwet [► Source]

how to map thunderbolt ports? submitted by /u/kocoman [link] [comments] [► Source]

macOS install to USB memory stick possible? ​ I have tried to install macOS to a USB memory stick without sucess so far. It went to panic. The attached is a photo of the panic. It seems AppleAHCIDiskDriver is the cause, so I guess dealing with memory stick is the problem. ​ ​ https://preview.redd.it/tmmpf7dzsbv91.png?width=3283&format=png&auto=webp&s=3fa3c2bf190b58f7c6353247dd220d4a42802c39 ​ Do we need a special attention for installing macOS to a USB memory stick? ​ Thank you very much! Have a nice weekend :) ​ ​ Details: OpenCore 0.8.4 macOS 12.6 Monterey. ​ USB Memory Stick: 128GB Samsung SDXC with a non-brand USB adaptor. ​ Install media has experience to successfully install macOS to an internal SATA drive. USBMap has been done. It goes to very close to a successful install. Install media has no problem to install macOS installer to the memory stick. macOS installer has no problem to boot and finish it. 2nd macOS installer boot and i...

I've disabled turbo boost on bios of my intel cpu. But my hackintosh doesn't apply this setting. Is there any way to disable turbo boost with opencore? I know there are some 3rd party apps but i wanna do this natively. submitted by /u/mr_eser [link] [comments] [► Source]

When I booted up the USB, it said "OC: Configuration requires vault but no vault provided!" Is it because I did not set it up correctly? Here are the specs... Author: dyslixic4859 [► Source]

​ Which one is the best free partition editor for resizing EFI partition? (It is one of preparations before you install macOS to your windows PC, in order to make it dual boot of macOS and windows.) ​ Background of this question: miniTool is very good to resize and move NTFS partition, but it does not allow to manipulate EFI partition unless you buy a license. ​ gparted is bad to resize EFI partition somehow. my experience says it is unstalbe in terms of touching EFI partiion. eg. it often finishes in the middle of resizing with errors. (It is really scary that you have an error when you touch a disk partition, you know.) It finishes without errors several times; BUT! gparted refresh indicates the size was changed successfully. when it moves to disk utility (of macOS installer), the size of EFI partition has not been changed. Conclusion: DON'T USE gparted for this purpose. ​ So I am currently using gdisk method several times without problems. https://supe...

Hello guys, I've been trying to solve a problem when installing hackintosh by opencore for 1 day and I can't solve it. The mistake is: 00:000 00:000 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82 00:488 00:488 AAPL: #[EB.H.IS|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82 00:524 00:036 AAPL: #[EB|H:IS] 0 00:549 00:024 AAPL: #[EB|LOG:INIT] 2022-10-21T09:32:47 00:572 00:023 AAPL: #[EB|VERSION] <"bootbase.efi 495.140.2~17 (Official), built 2021-08-30T07:02:12-0700"> 00:596 00:023 AAPL: #[EB|BUILD] <"BUILD-INFO[308]:{"DisplayName":"bootbase.efi","DisplayVersion":"495.140.2~17","RecordUuid":"6B6B10D3-E712-4F5D-9988-B4A9386C79CF","BuildTime":"2021-08-30T07:02:12-0700","ProjectName":"efiboot","ProductName":"bootbase.efi","SourceVersion":"495.140.2...

This appears when trying to boot from the USB Stick. My Specs: Gigabyte B450M-DS3H Ryzen 5 5600 16 GB T-Force RAM Does anybody know how to fix this submitted by /u/ImpressiveHackintosh [link] [comments] [► Source]

Hello, I have been running a rock-solid Monterey hackintosh on my Dell Latitude 7390 2-in-1 (i5-8350U Kaby Lake R) and decided to complicate my life yesterday and upgrade to the Ventura RC. The system seemed to upgrade fine and doesn't crash, but it hangs around halfway on the progress bar during boot. Attached is a screenshot of the system with a "-v" passed - it hangs right after TRIM completes. It's been on for ~18 hours and the messages following the TRIM output came in sometime overnight, so something is still running. My EFI is unchanged and includes the latest non-beta versions of opencore, lilu, and all kexts. Any thoughts on where I should look? https://preview.redd.it/f0xlt44eu5v91.jpg?width=4032&format=pjpg&auto=webp&s=7d928403fc4b2d406fbfa033bab4e1f8d1027a20 submitted by /u/Desperate_Diver549 [link] [comments] [► Source]

Hello guys, I have an almost perfectly working Razer Blade 15 with Big Sur, but unfortunately lid wake works only the first time: if I close and reopen the lid one more time I get a black screen and need a hard reboot.I have been looking at these two repos for help, but nothing worked for me: https://github.com/jnr0602/2021-Razer-Blade-15-Advanced-OpenCore#sleep https://github.com/vampjaz/razer_blade_stealth_hackintosh Is there anybody who knows what they are doing that can help me patch the DSDT? I'm a noob at this, even though I am a programmer myself. I can provide my EFI folder! Best, Stefano ​ edit: Razer is a RZ09-0369x, Base 2021, Intel i7-10750H, UHD630, everything works pretty much flawlessly except for lid wake on second time submitted by /u/ZippaKebab [link] [comments] [► Source]

I recently update my old workstation directly form Catalina to Big Sur from and Clover to OpenCore. This is the link it helps me. GitHub - b00t0x/Z9PE-D8_WS_Hackintosh Contribute to b00t0x/Z9PE-D8_WS_Hackintosh development by creating an account on GitHub. github.com I didn't flashed the motherboard with the custom rom, so I have to remove from the ACPI folder: - SSDT-CPU-OC.aml - SSDT-CPU.aml - SSDT-UNC.aml and I add - TSCAdjustReset.kext Not working -The Usb Wifi AC1200 does not works, I tried the Chris1111's method, it crashed for the moment.. Author: videlam [► Source]

Successfully Installed Catalina All Things Working Properly But after Updating to BigSur, Wifi not working But Ethernet Working Further, Updating to Monterey, Stuck on Apple Logo and BootLoop.. OpenCore 0.7.6 Used Same EFI in All Process submitted by /u/Kooky_Department_107 [link] [comments] [► Source]

I'm using opencore guide with i7 3770, asus h61M and gt730 ddr3. Everything working properly except sometime suddenly not responding and can't do anything just showing loading. It's happening day to day use with chrome, finder, video playing,... . After reboot, It work normally. During these day, it happening more and more. What issue can be ? please suggest the solution. submitted by /u/Zin_K0 [link] [comments] [► Source]

I've been using my hack for a little while now and just got an SSD to improve its performance. However, I'm unsure of what process to pick to migrate all my data to the new drive: One, I could use an utility like Carbon Copy Cloner to clone the HDD to the SSD, and just booting from the SSD. The challenges with this are the possible need for SSD-related kexts and performance issues with macOS not being originally installed to an SSD (I don't kno w if it needs to be in order to take full advantage of it). Two, I could install macOS to the SSD and then use Migration Assistant to move all my data frm the HDD. I'm not sure if all data will be transferred, and whether or not it is "safe" (I assume that since it's the same machine with the same kexts etc. nothing too bad can happen). Out of these two, which is the best and why? submitted by /u/HotGarbage1813 [link] [comments] [► Source]

submitted by /u/ernpao [link] [comments] [► Source]

Hello my dear friends, I have a work computer - Hackintosh made from some great friends here in the sub. Now with the new photoshop version, macOS 11.0 or later version in needed in order to install it. Unfortunately I am in Catalina 10.15. Can I go to a newer version easily? I have no idea how to do that and not familiar with the Hackintosh. Thank you very much. -------------------------------------------------------------------------- Asrock Z390M-ITX/ac Sapphire Radeon RX 5500 XT 4GB Pulse Intel Core i5-9600K 3.7GHz Corsair Vengeance LPX 32GB DDR4 RAM submitted by /u/giannisrethymno [link] [comments] [► Source]

Hi everyone! So my friend wants to install Hackintosh on his PC, but he got an Fermi 2.0 GPU and it's not on Dortania's OpenCore guide! There is no even Fermi 2.0 in list of supported GPU. So this GPUs aren't supported at all or I'm wrong? submitted by /u/nickwzxx [link] [comments] [► Source]

Anyone have this issue? What is can be reason? submitted by /u/oldman20 [link] [comments] [► Source]

The Specs: Motherboard : Samsung NP730U3E-K01ID CPU : Intel® Core™ i5-3337U iGPU : Intel HD Graphics 4000 RAM : 2x4GB Samsung DDR3 1600 MHz Audio Codec : Realtek ALC269 Ethernet : Realtek RTL8168H/8111H PCI Express Gigabit Ethernet WiFI/Bluetooth : Intel Centrino Advanced N-6235 TrackPad : Elan ETD0B00 PS2 Interface USB Chipset : Intel Chipset Display: Built-In Display Resolution : 1920px x 1020px @ 60Hz Storage : 1x Samsung MZMTE256HMHP-000 SATA SSD 256 GB Bootloader : OpenCore r0.8.6 macOS Version : macOS Catalina 10.15.7 Build 19H1715 Confirmed Work: QE/CI of Intel HD Graphics 4000 Internal Speaker, Internal Microphone, and Audio Jack Power Management All USB Ports TrackPad Battery Indicator WiFi and Bluetooth Brightness (Auto) Brightness Up and Down (Auto) Restart, Sleep and Shutdown WebCam HDMI Out HDMI Audio etc; Not Worked: Brightness Up and Down (Manually) etc, https://preview.redd.it/fepcjg5acku91.png?width=1920&format=png&au...

Hello! Thanks to You guys, I finally installed macOS on my linux laptop! But here's my question. How can I use my HDMI and mDP ports in macOS Monterey? Here are my specs ;) OS: macOS Monterey / Linux Ubuntu 22.04 Laptop Model: Lenovo Legion Y530 Graphics: Intel UHD Graphics 630; Nvidia Geforce GTX 1050 Mobile If you need any file, like config.plist or sth, answer down bellow. submitted by /u/Tiny-Fault-3205 [link] [comments] [► Source]

I've tried csrutil disable csrutil authenticated-root disable mount -uw /Volumes/MacintoshHD cd /Volumes/<DiskName>/System/Library/Extensions rm -rf rm /Path/IOAudioFamily.kext rm -rf /System/Library/Caches/* Which worked in previous versions, but these do not appear to work in Monterey submitted by /u/epsilona01 [link] [comments] [► Source]

Having issues with slow boot and wondering if anyone has verifiable information about the compatibility status of FireCuda 530 SSDs. I run Ventura beta with OC 0.8.3, but my issues started with Monterey. AsRock Z490 ITX, 10700K. FileVault is enabled. Recently swapped out my WD SN750 for a FireCuda 530 NVMe SSD. Boot times got noticeably longer. Specifically, this is boot to OpenCore boot picker AND boot to FV unlock screens. Tried disabling TRIM, but I don’t get consistent improvements in boot times. I see that Seagate lists the 530 as being fully Max compatible. I’m wondering what I’m missing. submitted by /u/mystandardusername [link] [comments] [► Source]

submitted by /u/GCNnintendo [link] [comments] [► Source]

Would any one know how to put Mac OS Monterey on a Lenovo ideal pad slim 3 I can’t find any files that will work submitted by /u/10gard [link] [comments] [► Source]

Im using DW1820a card connected over m.2 slot ofr Bluetooth and WiFi. I'm having issues with bluetooth loosing connection once every a while. Sometimes it returns after a minute or two, other times I need to restart the computer. Also noticed that when someone calls on my iPhone, and mackintosh is trying to handle connection, bluetooth disconnects. Is there something I can do to prevent this? Kext related to Wifi and Bluetooth I use are: AirportBrcmFixup.kext, BlueToolFixup, BrcmFirmwareData, BrcmFirmwareRepo, BrcmPathRAM3. Also have USBPorts map kext prepared. macOS 12.6, OC 0.8.4, Z370 submitted by /u/oneghost2 [link] [comments] [► Source]

Hello fam, I just checked this video on Youtube. I don't understand Chinese but just looking at the screen seems like this little machine can be transformed into a powerful Hackintosh. submitted by /u/heraldojones [link] [comments] [► Source]

submitted by /u/KozmoRobot [link] [comments] [► Source]

submitted by /u/Bright_Ad_3099 [link] [comments] [► Source]

Hi hackintosher! I have installed Monterey 12.6 on my PC with this specs: Asrock H510 - i3-10100 - Radeon RX470 or you can see more detail at my Github repository. My PC boots and works successfully Processing img 3om1i8ji46u91... I added these kexts: Kexts I am using both Macs Fan control and iStat Menus for monitoring CPU & GPU temperature. But on both apps, I cannot control the Fan speed although the temperature sensors are working. Macs Fan Control - The Min/Max is wrong, so cannot edit the speed value iStat Menus, 99% is 0 iStat Menus, 47% > 99% What should I do now, or this cannot be done on this hardwares/OS? My repository (include my detail specs, EFI, configs): https://github.com/buiducnhat/CometLake-H510-RX470-OpenCore Thank you for reading this, have a nice day! submitted by /u/gerpann [link] [comments] [► Source]

I installed Catalina onto my HP X360 laptop with intel wifi. I used Nirech Catalina w/Clover, but no wifi as expected. Did some research, and stumbled upon several sites and videos talking about itlwm and airportitlwm. I followed along with several videos, by using Cloverconfigurator to mount the EFI partition, went to EFI>CLOVER>kexts>other and then I placed itlwm.kext into the folder per the guide. I then mounted Heliport, and dragged the heliport application into the applications folder, and then added it as a startup app under the users settings. In the videos, it works, and they get wifi. On mine, when Heliport loads it gives error message saying "itlwm is not running". Alternately, I've tried removing itlwm.kext and instead placing airportitlwm.kext into the same folder mentioned above. That appears to do nothing either. The wonderful /s instructions online seem to indicate: Unzip. Copy the kext files into your Bootloader's kext folder in your EFI ...

submitted by /u/ido_goldfarb [link] [comments] [► Source]