iATKOS | United Kingdom

If you're not using a Bluetooth USB dongle with Catalina please don't worry to reply. submitted by /u/ithakaa [link] [comments] [► Source]

submitted by /u/deejay_grognacc [link] [comments] [► Source]

hi everyone im trying to get imessage to work on catalina 10.15.3, when i mount my EFI parttion and then open the partition there is nothing there i don't understand whtas wrong . here is the video i used to setup my vm. https://www.youtube.com/watch?v=-dylDY04W3A submitted by /u/haardikg [link] [comments] [► Source]

Whenever I start booting into the MacOS base system to install MacOS on my laptop, it presents me with a loop of the 2 messages in the photo. I've been following this guide for everything but the config.plist [ URL ] and this guide for the config.plist https://dortania.github.io/OpenCore-Desktop-Guide/config.plist/haswell.html . I'm trying to run Opencore 0.5.7. Laptop: Hasee K610D-i5 CPU: i5-4210m GPU: Intel HD graphics 4600 (mobile) Mobo: Intel HM86 chipset RAM: 8 GB 5400 RPM hard drive submitted by /u/Hyper_Pickle [link] [comments] [► Source]

DJI has unveiled a new Mavic Air 2 drone featuring high-grade imaging and advanced flight performance. Created to make capturing unique, high-quality content from the air simple, fun, and safe, Mavic Air 2 offers flagship capabilities in a compact and easy to use folding drone that features 8K functionality. A larger 1/2” camera sensor offers high-resolution photos and videos to make content stand out, while advanced programmed flight modes, intelligent features and imaging technology make capturing professional-looking content effortless. Pilots can now stay in the sky longer with an enhanced maximum flight time, capture vivid imagery with completely revamped autonomous capabilities, and wholly transform their content with in-app editing features. “Mavic Air 2 is another milestone for DJI, demonstrating that our smartest consumer drone does not have to be the largest,” said DJI President Roger Luo. “While the Mavic Air 2 bears all the hallmarks of the Mavic drone family, we had ...

submitted by /u/Codyktt [link] [comments] [► Source]

I've read that the Radeon 5XXX and 6XXX models are incompatible with the newer OS. Would this one work, as I think it would be an earlier model? ​ Thanks in advance! submitted by /u/ElleAnderson2 [link] [comments] [► Source]

I'm looking to get my hands on a BCM94356Z but everything on ebay will ship in 3 months. submitted by /u/ithakaa [link] [comments] [► Source]

This time i decided to build a hackintosh specifically for FCPX. The build itself is successful and recently I build exclusively on Asus mainboards, its my 5 or 6th built mac, all using Asus hardware. ​ CPU Coffee Lake 8th generation Intel i7-8700 3.2 ghz, RAM 24 GB DDR4 ASUS Prime H310M-K LGA1151 (300 Series) mainboard 500 W power supply Samsung 1TB and 512 gb SSD drives, 1 7200 rpm 4TB drive Video card Asus RX580 8GB (replaced earlier model Asus RX560 2GB) Internal GPU: disabled in BIOS CMBIOS iMacPro 1.1 2017 Kexts: Whatevergreen, Lilu, VirtualSMC, Intel Ethernet driver Clover bootloader (was version 5107). OS Catalina 10.15.4 Sound output through Sony ECM-PCV80U USB card with 3.5mm input and output Mike USB Marantz PMP1000U Display 24 inch Dell The computer is used for FCPX 10.4.8, some graphic work, Apple Motion and Compressor. I don't use BT, wifi on the build (so no card for them). I already did a couple of videos on the computer. Everything works, fast. Vid...

Has anyone been experiencing issues when it comes to the ASUS Sabertooth x79 MOBO? I’m currently in a Mojave install with only USB 2.0 support. All my ports seem to work, but not at 3.0 speeds. I have been attempting the RehabMan fix for USB, however, I keep going into my system info and IOReg but I only see USB 2.0 and my ports are named PR and HP under EH01. I’m not sure what’s going on with that and I can’t find anyone else with a similar issue. I also have an issue if I plug in a USB 3.0 device my system freezes and I can’t do anything in it. ASUS Sabertooth x79 Intel 4930k EVGA 640 2GB (Yeah I know my graphics card is crap, but I only do audio so sue me) I believe I used UniBeast to install, but basically edited my clover using RampageDev (I miss him). To add on, I boot into my device with minimal boot flags and it runs smoothly when I’m using Logic Pro, but I would love to have 3.0 capability and just a more solid Vanilla build. Any help is very much appreciated! sub...

I have a VMware with catlina installed And I have assigned 10 gb of ram and 4 cores for the cpu but unfortunately i can't pass more than 128mb for vram I need to acces xcode? Will it run fine ? submitted by /u/ObadaJasm [link] [comments] [► Source]

Im thinking about either using a Gigabyte B450 AORUS PRO WIFI or a ASUS ROG STRIX B450 does anyone use either one of these? submitted by /u/ahdez91 [link] [comments] [► Source]

I got it to work my hackintosh but when i run basic.sh again it gives a memory error..i changed the basic.sh -m 2G \ to -m 4G \ and it said cannot allocate memory. Changing it to 3G worked. what is the way to give it maximum memory. and can i run Mac os without running basic.sh ? Also, running videos on youtube has audio and video incorrectly synced. What to do? thanks submitted by /u/bisupportm [link] [comments] [► Source]

Having trouble getting the internal graphics set up properly on a new build that I'm working on for a buddy of mine. EFI and About This Mac attached. OpenCore Vanilla Install Intel i5-9600K Corsair Vengeance DDR4-3200 Gigabyte Z390 Gaming X Sabrent Rocket M.2 NVMe SSD EFI https://preview.redd.it/rxexed7bwgv41.png?width=670&format=png&auto=webp&s=91e18e3f7a00a1130c5436544f49fb294e586b28 submitted by /u/Eric7696 [link] [comments] [► Source]

Have you guys seen this on indiegogo? Thoughts? submitted by /u/blckb3ard [link] [comments] [► Source]

Hello everybody. I'm just starting learning about Hackintosh. The laptop I have is a Vivobook X571GT with an i5-9300h and a GTX1650 as a GPU. Thru the process, I have already finished using transmac and making a bootable drive of Catalina on a external hard drive (will this also work?). And I have followed the instructions of putting Clover in another flash drive (which at this point is also another external HDD where I made a partition so i can make it fat32). So I went to the UEFI, turned off vTD, Secured Boot, Fast boot. But sadly my UEFI software doesn't have the option for Enabling Legacy mode and enabling Legacy USB Support. But then my laptop read the second hard drive with clover (the one i partitioned for fat32) so I put it up first on boot priorities. After I restarted, ASUS Logo comes on, then it's just pitch black. What did I do wrong? Specs:i5-9300hGTX165024GB RAM500gb SSDVivobook X571GT submitted by /u/lorp162000 [link] [comments] [► Source]

submitted by /u/b3anz129 [link] [comments] [► Source]

Apple's new iPhone SE is able to generate Portrait Mode photos entirely through machine learning, according to the developers behind the Halide Camera app. This iPhone goes where no iPhone has gone before with “Single Image Monocular Depth Estimation.” In English, this is the first iPhone that can generate a portrait effect using nothing but a single, 2D image. Spotlight Deal: Apple HomePod On Sale for $204.99 [Deal] Share Article: Facebook ,   Twitter ,   LinkedIn ,   Email ,   Reddit ,   Digg ,   Delicious ,   StumbleUpon Follow iClarified: Facebook ,   Twitter ,   LinkedIn ,   Newsletter ,   App Store ,   YouTube [► Source]

I made the mistake of getting the Samsung 970 Evo+ instead of just the regular Evo and now I'm experiencing problems installing MacOS. There is a firmware update on the Samsung website, but I'm unable to get it to work. My question is this: Do I have to have a working MacOS first before updating the firmware? Will I have to buy another hard drive to instal MacOS first and then update the Evo+ hard drive? Thanks for your help : ) In case you need to know, here are my other specs: Processor: i9 9900k; MB: Gigabyte Z390 designare; RAM: Crucial Ballistix 16 GBx2; HD: Samsung Evo+ 970; Graphics: Sapphire Radeon RX 580) submitted by /u/brysonpricemusic [link] [comments] [► Source]

Hello, I successfully hackintoshed my Dell Inspiron 13, and everything is working 100%. The only issue I have left is sometimes the touchpad will randomly give out. I can recover it by putting it to sleep, and waking it up again. But that's a bit of an annoyance. There's not really a specific time frame when it happens either. I did make a patched DSDT, and it happens whether in polling mode (applying the voodoo patch, but not the GPIO patch) and interrupt (applying both). I followed the GPIO pinning guide, and from what I can tell it's pinned, but I'm not exactly sure how it works, I might be wrong. Here are a list of kexts I'm using: AppleALC IntelBluetoothFirmware, IntelBluetoothInjector (for internal Bluetooth) Lilu RtWlanU, RtWlanU1827 (for USB WiFi) SMCBatteryManager, SMCLightSensor, SMCProcessor, SMCSuperIO USBInjectAll VirtualSMC VoodooI2C, VoodooI2CHID, VoodooPS2Controller Whatevergreen Anyone else have experience with this, or any fixes? ...

Hello, I successfully built an Hackintosh on Catalina. My primary GPU was an Nvidia card (gtx 980) but I successfully disabled it and used the IGPU (630 UDH) from my CPU (i9 9900k). The IGPU is fully loaded with acceleration using the framebuffer tutorial. However, I have two monitors (same monitors, 2k @ 144Hz). I connect them both via Display Port (DP). One is connected to my motherboard and one to the Nvidia card. I only have one DP in my motherboard. My motherboard is: ASUS ROG STRIX Z390-F When I start my Hackintosh, it only show information (clover and verbose logs) to the screen connected to the Nvidia card. However when the Hackintosh finished to boot, it show macOS to the second screen (connected to the motherboard). The first screen stay on with debug log on it. (The Nvidia GPU is disabled with the -wegnogpu argument in clover settings) Is this possible to use that second screen which is connected to the Nvidia card? My monitors: https://imgur.com/dFfUd6u submitted ...

submitted by /u/tuppaware [link] [comments] [► Source]

I've noticed on my new build, running 10.15.4 with OC 0.5.7 on an X570 board, I only see upload speeds...most of the time. With iStat Menus, I wish I could see both! But here's what I mean by sort of: ​ https://preview.redd.it/zturomq9cgv41.png?width=544&format=png&auto=webp&s=c134f577d80121fe16c93831de1f283d1cb750f1 Note that the bottom part always shows down speed. It's the same story for Activity Monitor (red is sent): https://preview.redd.it/n31h1p0fcgv41.png?width=1202&format=png&auto=webp&s=6d0465d70327addde9f94f35ed0a9abbc9605798 I do have to use a real unusual Intel kext for my NIC though - SmallTreeIntel82576.kext. Had to really dig for one that works, and apparently it's been patched by a few people, so I wonder if that's part of the issue. If I can find a kext for the onboard 2.5gbps Realtek NIC I'll give that a shot too. Any other ideas? Minor issue but trying to get all these little kinks ironed out. submitted...

hey guys, ive successfully installed hackintosh(on my 2nd driver the mSata SSD), but the Windows doesnt appear on the Clover(from my first SSD)? ive already set my boot order to MacOs drive first any suggestion? thanks stay safe submitted by /u/JKratos [link] [comments] [► Source]

(This is a continuation of another problem I had: https://www.reddit.com/r/hackintosh/comments/g93etq/cannot_get_uhd_630_to_work_properly/ ) After the problems mentioned in the post above, I ended up trying to make a new vanilla usb installer and installing a brand new vanilla installation of Mojave. (I was using an Olarila Mojave image before) I followed the guide that was listed in the subreddit, and configured my config.plist to what was shown for my cpu (Coffee Lake). I made a macOS Mojave install disk, and put the clover files in the efi partition. Clover starts, but when I click on my installer, it just hangs on “End Random Seed” and doesn’t proceed with the boot. Can someone help??? Specs: Intel Core i7 8700T @ 2.40ghz 16GB DDR4 Intel UHD Graphics 630 The actual system is a Dell Optiplex 7060 Micro submitted by /u/playsamay4 [link] [comments] [► Source]

submitted by /u/Spider-Ian [link] [comments] [► Source]

https://youtu.be/kzC3yU0EoCg submitted by /u/owusuapp [link] [comments] [► Source]

I am getting the following screen after selecting mac os install from oc usb. I used dortania guide, compiled the AWAC, PMC amls from example without as is becuase they seemed to have my stuff alfeady, ssdttime used also). Here is my sanity checker info https://opencore.slowgeek.com/?file=coffeelake057Kjfr21&rs=coffeelake057 Image of crash crash submitted by /u/BRX7 [link] [comments] [► Source]

​ https://preview.redd.it/p6rrpyezdcv41.jpg?width=4000&format=pjpg&auto=webp&s=91d674384c0f6844c8746568449be4f98cfcbd7b Let me thank everyone who have previously paved the way for us beginner Hackintoshers. This was so easy compared to my first build and everything worked flawlessly out of the box. Setup and install of box in total, roughly 1-2h. The guide I used (along with OC's written guide) was Technollis: Video Here Specs Corsair TX550M, 550W PSU Gigabyte Z390 GAMING X, S-1151 Intel Core i5-9400F Prosessor Sapphire Radeon RX 580 Pulse 8GB Corsair Vengeance LPX 16GB DDR4 3200MHz CL16 2x WD Black SN750 500GB M.2 SSD Noctua NH-U12S CPU Kjøler Fractal Design Define C ATX G-tech 2TB Time Machine / SuperDuper! cloning disk for Backups PS. Build parts were chosen based on other peoples build success. CPU was chosen specifically to bypass iGPU hassle. Opencore is an incredible bootloader. I'll stick with OC over clover while it is this stable a...

Hello there, i made my last hackintosh around 1 year ago (Sierra). I would like to get back and update to OSX Catalina, but bootloader seems to be messed up right now. So basically i do have my partition with OSX inside but i cant boot it. Could you help me make a bootable usb to fix multiboot? Or its easier and better to start all over again? submitted by /u/blissx05 [link] [comments] [► Source]

Hello everyone, I'm sure this infamous error has been seen so frequently around here, so apologies if my post sounds redundant. I have a Dell Precision T3500 -- Xeon W3520 @ 2.67 GHz, 6 x 4 GB of ECC DDR3 at 1066 MHz (24GB), Sapphire ATI Radeon 5770. I have been trying to get the Mojave installer working for several days to no success. I have tried using the OsxApti3Drv (or whatever it was called) and I've tried the AptioMemory fix as well. Neither have worked. It will get to the End RandomSeed screen, show some plus signs and reboot shortly after. The system uses legacy BIOS, so I excluded any and all UEFI items when installing the Clover boot loader onto the USB installer. Does anybody have any other thoughts I can try? Sorry if this post seems all over the place, I've been up all night doing this lol. One thing to note is, I have (and really prefer to) stay away from the tonymacx86 MultiBeast/UniBeast tools as far as possible. Hope that doesn't bother anyone. ...

https://github.com/foxlet/macOS-Simple-KVM/issues/194 I am stuck there and the link has a screenshot.. Please help. Thanks submitted by /u/bisupportm [link] [comments] [► Source]

https://github.com/foxlet/macOS-Simple-KVM/issues/194 ​ I am stuck there and the link has a screenshot.. Please help. Thanks submitted by /u/bisupportm [link] [comments] [► Source]

submitted by /u/digital_arithmetic [link] [comments] [► Source]