iATKOS | United Kingdom

Hi All, I'm working on hacking an old Asus laptop I have lying around and almost everything works great. Right now I'm trying to convert VoodooI2C's DSDT changes to ACPI hotpatches, and I have all of them working except for the Skylake patch, which I need as I'm on Skylake and the touchpad doesn't work without it. So far I have been unable to get the patch working as a simple DSDT override as it creates tons of errors within my DSDT (doesn't even compile afterwards), which has made it far more difficult to even understand what the patch does. ​ Relevant Specs (I can provide ofc more but they shouldn't matter for this): ASUS GL552VW i7 6700HQ ELAN 1000 (I'm using the VoodooI2CELAN satellite kext) (_SB.PCI0.I2C1.ETPD in my DSDT) I followed the vanilla OC guide and the official VoodooI2C dev guide for its DSDT patches ​ I'm going to attach my raw decompiled DSDT and what I have so far . Thanks! submitted by /u/EasyBot01 [link] [com...

submitted by /u/CFD2 [link] [comments] [► Source]

I'm looking for a compatible 10th gen intel driven laptop to make a hackintosh. I know 10th gen and laptop and 2 very tough to call atm. So Im wondering if anyone else is considering this model. I landed on this machine after a lot of research but some other models I was considering are the following. Razor blade 15 (2019 base model) <-- already hackintoshed but 9th gen cpu. Lenovo IdeaPad L340 15 <-- already hackintoshed but 9th gen cpu. My only other concern is getting a full SATA slot, I know its nuts cuz m.2 is faster but I want a big drive inside my laptop and something I can easily replace. All of the above have that and the only 1 not to be hackintoshed is the legion 5i. submitted by /u/madhits [link] [comments] [► Source]

submitted by /u/OfficialDicko [link] [comments] [► Source]

I figured I would give OpenCore a shot with my laptop, if anything, just to play around. I made the USB drive per the directions on the OpenCore guide. When booting I am getting this error loop over and over again. Error being seen It looks to be an issue the the Embedded Controller SSDT, but I can't figure out how to correct it. Any suggestions would be awesome and much appreciated. submitted by /u/cr0wstuf [link] [comments] [► Source]

Hello all! I Finally built my aorus from scratch and got my hacintosh up and running on it!! my only problem is my ethernet is not working :(. The yellow and orang light pops up on my mac but it doesn't turn green. i allready loaded the intelmausi and tried other kext files but it seems like its not recognizing them. (also when i go to my prefences/network/add i get an error message). If anyone can help please help!! submitted by /u/Alltimebeat [link] [comments] [► Source]

Hey everybody, Currently on my first attempt at a Hackintosh and I seem to be stuck on the installation part. I created my EFI, added all my necessary kexts, made my config list, etc. However once I plug in my USB with my EFI partition to my computer and select it as my boot option it boots to my bios. This computer is fresh btw with no software installed. Could you guys give me a hand and help me figure out what I might have done wrong and best possible fix please? Can attach config list and any pictures/screenshots if needed . . . . Intel Core i7-8700K 3.7 GHz 6-Core Processor Gigabyte Z370 AORUS Gaming 5 (rev. 1.0) ATX LGA1151 Motherboard Crucial 16 GB (2 x 8 GB) DDR4-2133 CL15 Memory Samsung 860 Evo 500 GB 2.5" Solid State Drive Seagate Barracuda 3 TB 3.5" 7200RPM Internal Hard Drive Seagate Barracuda 3 TB 3.5" 7200RPM Internal Hard Drive Sapphire Radeon RX 580 8 GB NITRO+ Video Card submitted by /u/bizz24 [link] [comments] [► Source]

submitted by /u/sannydo [link] [comments] [► Source]

Hi everyone, I've been running Mojave on this laptop for a while, and it works nicely for the most part, but I have problems with the audio. The thing is that I never know when the audio will work, since it sometimes just recognizes my internal speakers and sometimes it doesn't. Does anybody know any fix? There are times when I just reboot and my speakers appear in my sound options, but most of the times they don't. The sound card is an ALC256 and I followed this guide to get it working. (kind of) https://techposts.org/fix-realtek-alc256-audio-macos-hackintosh/ Any help is greatly appreciated :) submitted by /u/benjaminpartida [link] [comments] [► Source]

submitted by /u/u_dont_know_who [link] [comments] [► Source]

Alright, one thing, sorry for asking so many questions here, are you guys annoyed at me? Anyways, I want to make a hackintosh with my laptop, and I don't really know how to. Here are some stuff about my laptop so you can understand it better: 8 GB of memory 256 GB Solid State Drive Dual core intel i3 10th gen 1.20 GHz, 4 logical processors BIOS Mode: UEFI Secure Boot: Off System type: x64 Manufacturer: Lenovo If there is any more information you need, ask me submitted by /u/ChilyCheezeDogGD [link] [comments] [► Source]

is it possible ? submitted by /u/A-questioner [link] [comments] [► Source]

submitted by /u/silent_fisher [link] [comments] [► Source]

Hi, I am using Logitech G430 headset. I am hearing my microphone. I was facing this issue same on Windows 10 but I can fix this by sound control panel. I check the listen this device and then uncheck it, problem was fixed. But How can I fix this on Mac? Thanks. submitted by /u/bomican [link] [comments] [► Source]

Finally I was able to successfully transition to OpenCore 0.5.9 from Clover. CPU: Intel i5 7600K GPU: Intel HD630 (iGPU, enabled), Nvidia GTX 1060 3GB (eGPU, disabled) RAM: 2X8GB GSKILL DDR4 2400CL15 Motherboard: ASUS ROG STRIX Z270H Audio Codec: SupremeFX S1220A Ethernet Card: Intel I219V WiFi/BT Card: DW1560 What guide/tool followed: opencore 0.5.9 or clover 5120 What part I got an issue with: Intel HD630: Pink Screen issue. Followed the guide here . Disabled Nvidia GTX 1060. Followed the guide here for opencore, clover was also similar. Motherboard was not booting and getting stuck at #LOG:EXITBS:START. The option "SyncRuntimePermissions" also helped fixing dual boot issues with Windows 10. Dual boot works properly, still need to figure out how to add my Linux setup into the mix. Windows 10 was pre-configured on another SSD so it did not have to play with the Boot Camp settings/drivers. Really would love inputs on how I can improve the confi...

I've followed this guide on github to the letter to install Mojave on a Thinkpad T440p. Everything works great from USB and I can run the install, but after following post-install steps it refuses to boot from the local drive. I can only "boot from recovery" or the USB. The only time it managed to boot from the drive was during the install when it restarted a few times. I got some helpful info from tonymacx86 forums that explained that sometimes you have to manually add BOOTx64 as a bootable target from the UEFI Shell. After messing around a bit in the shell I managed to add it as a boot option (the one on drive, not USB); I thought this was the ticket. Sadly, even with the option to boot from this device, it still takes me back to Clover "boot from recovery. Very frustrating. Here's some screenshots to illustrate problem: https://imgur.com/a/UsDJkrT submitted by /u/Brave_Ad4068 [link] [comments] [► Source]

​ https://preview.redd.it/1jcunce56qd51.png?width=367&format=png&auto=webp&s=b271930c218c968ed087eee283fd53eafbea3cf3 submitted by /u/SVSurve [link] [comments] [► Source]

So I installed macOS on my laptop and everything is running fine. Everything is fully functional and there are no issues until we get to the Battery Life. At 100% Charge, my laptop dropped to under 10% in a little over an hour of use in class and needed to be plugged in. I tried looking up fixes but nothing has worked. My laptop is the Dell Inspiron 15 5570 I couldn't find the Model Number on Dell's site anymore but I found it here on Best Buy where I bought it https://www.bestbuy.com/site/dell-inspiron-15-6-laptop-intel-core-i5-8gb-memory-1tb-hard-drive-silver/6258081.p?skuId=6258081&intl=nosplash Any and All help is appreciated. submitted by /u/X_ANTH0NY_X [link] [comments] [► Source]

So first off I know that you shouldn't post about virtual machines here but I think that this community would be the most knowledgeable about that kind of thing. I tried to stay within the spirit of the rules hear but if mods feel otherwise just let me know and I'll take it down. I'm just really confused about this. So I have been at this most of the day now and just can't seem to figure this out. whenever I try to log into iMessage with my Apple ID it sends a verification code to my phone but when I type it in it just loads for a few seconds then errors out. I did some research and I think it's that my virtual machine doesn't look like an apple device to the servers. From what I can gather it looks like it has something to do with my device's NVRAM (sorry I can be more specific I don't understand it myself). I tried following some guides online to fix it, which involved mounting EFI Partitions using Clover Configurator. But when I open the partition in...

I have an Intel NUC 10 i5 with 256 gb ssd. I tried using an external ssd because I thought It may be because of the M.2 ssd port. All the bios setting I verified twice. Here is the EFI Folder I was able to boot into Catalina successfully and everything worked excluding WIFI of course. Problem is when trying to update to Big Sur I already updated all the kexts and drivers to open core 0.6.0 so I believe that shouldn't be the problem https://drive.google.com/drive/folders/16E09QsfLhp1GzGqNTWLuzqh3-28QXHGs?usp=sharing submitted by /u/Kb756523 [link] [comments] [► Source]

Does anyone know if you can get ANY version of mac OS running on the alienware alpha? trust me i have tried all the guides that are available, ive tried on here and on tonymacs website, i tried a complete vanilla install guide from here and the unibeast methods over at tonymacs. Everything works fine but theres just one thing that i CANT get to work EVER, i install the GPU drivers and when i hit select nvidia web drivers and restart, it starts loading up the mac logo and then when its about to completely boot up the monitor goes into "power saving mode" and it just shuts off but i can hear the gpu fans spinning. Does anyone have any suggestions or even a possible fix, ive tried literally everything and nothing seems to work i know that the newer versions MAC OS are not compatible but ive tried Yosemite, Sierra, High sierra and El capitan and none of them work with the same error that when im booting up with the gpu selected and it just turns off the monitor ill list all th...

Finally got my old/reliable Dell e6430 dual boot with Windows 10 and Catalina 10.15.6. Everything working great! i7 CPU, nvs5200m/Intel 4000, 8gb ddr3, 120gb. submitted by /u/clemsyn [link] [comments] [► Source]

hello what could cause the slow boot after login in ? when i put my pass the mac takes longer to load everything it looks like the screen freezes but i can move my mouse takes really long till i can interact. i expirience it since the security update. did allready updated the kexts (weg lilu usbinjectall clover) but still slooow. anyone had the same problem with an solution and what could cause this ? submitted by /u/bomkad [link] [comments] [► Source]

CPU: I5 7400 GPU: Removed To Hackintosh(Nvidia 1050Ti 4Gb) RAM: Motherboard/Laptop model: ASRock H110M-HG4 Audio Codec: Realtek ALC887 Ethernet Card: Realtek RTL8111GR/RTL8111C Wifi/BT Card: No What guide/tool followed: https://github.com/acidanthera/OpenCorePkg What part I got an issue with: https://preview.redd.it/4stb8y7vcpd51.jpg?width=1280&format=pjpg&auto=webp&s=beda78c1d6e96ccd14875b4046440d00551327f7 What files/config I am using: https://opencore.slowgeek.com/?file=kabylake0590y6Eu7&rs=kabylake059 submitted by /u/LenonCalsavara [link] [comments] [► Source]

In February, I built my first Hackintosh (and PC) and am quiet happy with it ever since. Of course, much credit goes to this very community! It is a dualboot machine, so I use Windows for games and macOS for everyday stuff and work. The other day I was asked on one of my guide posts here whether my Hackintosh has 3D acceleration. I went and tried one of my games (Hitman 1) on macOS and indeed it is quiet laggy when looking around and moving the character; on Windows I, of course, have no issues. So, I guess, 3D acceleration indeed doesn't work. As I do graphics intense things on Windows I don't care much, but naturally I want a fully working Hackintosh... I looked into the issue and discovered on the quiet new Dortania OpenCore Guide, that my Graphics Card, the Powercolor RX 5700 XT 8GB Red Devil is actually said to be avoided (contrary to recommendations of this community in December): the specific brand to avoid 100% is Powercolor [...] regardless of what core they r...

I am getting monitor 7mb instead of GTX 980ti 6gb,was working fluently before the blackout (GPU acceleration was working) i was not getting issues Also cuda drivers shows no GPU detected and nwd is set to NVIDIA graphics driver Tried to reinstall web drivers (différent versions) same thing i5 haswell GTX 980ti 6gb 250gb SSD 8gb ram submitted by /u/Malik4677 [link] [comments] [► Source]

I’m looking to build a decent hackintosh that I can also use to virtualization operating systems under Linux. I would need something with a decent amount of pci E so I can pass through cards. Most consumer boards I’ve seen only have 2 maybe 3 slots. submitted by /u/skymtf [link] [comments] [► Source]

submitted by /u/sannydo [link] [comments] [► Source]

Hello everyone! I tried to setup High Sierra with Clover, but was recommended OpenCore, so here I am (using 0.5.9). My specs: ​ Mainboard: Asrock P67 pro3 (no iGPU port, so iGPU not used), supports UEFI Processor: i7 2600k GPU: Nvidia GTX 980 RAM: 16 GB (4x4GB) Network adapter: Realtek RTL8111E Wi-Fi: I use D-link DWR-932 which is supported natively, I can even run "sntp time.apple.com " when I used Clover to boot macOS installation Audio controler: Realtek ALC892 ​ I have bootable USB installator made with createinstallmedia on VM, I followed dortania guide for Ivy Bridge and applied ​ Desktop iGPU + dGPU(HD 2000/3000): AAPL,snb-platform-id | Data | 00000500 device-id | Data | 26010000 ​ for headless iGPU (I assume this means iGPU is disabled). I didn't use SSDT-IMEI (not needed for disabled iGPU), but I generated and used SSDT-EC. When I choose "OPEN CORE" from boot list, I either get a black screen with "_" or "no sch...

Hi r/hackintosh , I am having trouble with my Asus Z490-I Gaming motherboard, and a 10th Gen i5-10600. I also have a 970 Pro, which may be causing NVMe issues. I can load into OpenCore, but when I try to boot into the installer, the computer shuts off. Attached below is my EFI folder, with the OpenCore error. https://drive.google.com/file/d/1ffp-UM-oofflmczkaAEtkJyoLH0T2_b7/view?usp=sharing Thanks for your help. submitted by /u/HexagonalFox [link] [comments] [► Source]

Hi guys look i knew hackintosh for a long time but i never try to download it so i have a hp laptop it has intel i5 i think 2gen and amd graphics card so ya i want to install hackintosh on it but i dont know how and youtube makes it even harder also i want to know what is the best mac os version to download cause no one is saying anything about that and ya isaw a video that every one is recommend it to me https://www.youtube.com/watch?v=eUnVzJsINCI&t=295s but i really wanna know what is the best way cause iam done so please help me if you wanna help me out this is my discord ( iix_MeCrAsH#5348 ) or help me in the comments so ya please iwant a full guide and also i know that i can't use wifi but is there a way to use it without buying a wifi adapter or the mac wifi device thing idont know but you understand me right and ineed to know where to get the mac os iso you need to donwload it or the guide will tell you how and thanks . please any one i read the faq but i want to say...

I am hopeful someone will be able to help me solve this issue, thanks in advance. Over the weekend, I attempted to install Catalina 10.15.6 on my NUC Skull Canyon, OpenCore 0.5.9. After following great tutorial by Alex Porter on GitHub, I ended up with the NUC being stuck on Apple logo during the initial install. There were few issues that came up during verbose boot, anyway I raised the issue and abandoned the project for time being. Subsequently, I tried to reinstall Windows 10 on the same SSD - used the W10 install USB to format the primary install partition. However, even though I did new install on the freshly formatted partition SSD, Windows will not boot normally UNLESS the original OpenCore installation USB is inserted in the machine. During this instance, the PC finds the USB Catalina/OpenCore EFI (I am guessing) and loads the OC boot manager that then lets me select Windows 10. Also, the SSD shows in boot manager as UEFI drive, but the NUC will not recognize it as bootable....

TL;DR: I need OSX for HFS+ file system support — will hackintoshing a NUC limit the capabilities of the hardware that allow it to be a great Plex server? For many many years now, I've been using my iMac with 20TB of storage connected to it as a Plex server.But I'm tired of leaving it on 24/7, as it's a power hog and the sustained powered-on state has slowed it down significantly. I've been looking at switching to the NUC8i3BEH as the plex server connected to my 4-bay enclosure, because I'm tired of investing more and more money into this, and wanted something cheap that would get the job done. I was all set to purchase, but then remembered something — my 20TBs of media are all on drives formatted with Mac OSX Extended (HFS+), and a NUC running Windows or Linux won't be able to read them. There are workarounds for this, software that will allow Windows to read and write with HFS+ drives. But I keep seeing problems with the software that have corrupted some pe...

Comrades, I need someone to guide me, I am trying to install HighSierra on a Corei5 2430M (SandyBridge). I have followed the OpenCore guide to the letter, but at boot time, it does not detect the USB -it tells me: "no system detected" Here I leave my specifications: CPU: Intel core i5 2430M GPU: HD3000 / dGPU: Radeon HD7400M RAM: 4gb SSD : 240GB Kingston Green. Codec de audio: ALC269 submitted by /u/NomeacuerdoXD [link] [comments] [► Source]

My setup is like that. 1 SSD with Windows. 1 NVME with MacOs OC. 1 GPU dedicated to Mac boot on monitor 1 over hdmi and 1 GPU runs Windows over DP on monitor 2. My question, I want to boot both OS at the same time and have them work in parallel. Is this possible? if not please explain why not submitted by /u/meatware [link] [comments] [► Source]

Hey there, I have a OpenCore Hackintosh. I'm trying to get the boot chime working with OpenCanopy but keep getting the error 04:605 00:002 OCAU: PlayFile playback setup failure - Invalid Parameter 04:605 00:000 OC: Play chime started - Invalid Parameter submitted by /u/dkay0670 [link] [comments] [► Source]

https://blog.daliansky.net/Lenovo-Xiaoxin-PRO-13-2019-and-macOS-Catalina-Installation-Tutorial.html I know most of you won't be able to read chinese (i can only read traditional, this is simplified), but it looks as if he managed to get both wifi/BT (AX201) and the iGPU (both DP and HDMI) working on his lenovo laptop, seems like good news! I'm looking to build my own 10th gen desktop so it's good to know that AX201 seems to be working iGPU (translated): Intel UHD Graphics 620, comet lake doesn't have a kext yet, i used coffee lake to trick it into wkring, platform-id: 0x3ea50004. Added a DVMT patch, used devices-properties to insert it; working on both DP and HDMI Wifi/BT: He says it's all working, airdrop and sleep/wake all good! Has anyone tried something similar on 10th gen with wifi 6? submitted by /u/jonnycool06 [link] [comments] [► Source]

submitted by /u/labradog [link] [comments] [► Source]

CPU: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz GPU: NVIDIA GeForce GTX 650 Ti 2 GB RAM: 32GB Motherboard/Laptop Make and Model: Asus Sabertooth X79 Audio Codec: External Audio Interface(s) Ethernet Card: Intel 82579V PCI Express Gigabit Ethernet Wifi/BT Card: Cambridge Silicon Radio Touchpad and touch display devices: Apple Magic Trackpad BIOS revision: 4701 Which of the guides on the sidebar you used? https://dortania.github.io/OpenCore-Install-Guide/ What's working, and what isn't working: Not working: - Sleep (haven't taken the time to configure that yet). - Wifi (Don't have a Wifi Card installed) - Onboard Audio Working: Everything Else. https://preview.redd.it/pxmte9hmrid51.png?width=1302&format=png&auto=webp&s=e4560840a7648f5a0a6b5dea8aeff9cf3ff1b44d Steps taken. Followed guide letter by letter from Dortania for Ivy Bridge Desktop: https://dortania.github.io/OpenCore-Install-Guide/ SMBIOS MacPro6,1 Got stuck, but added npci=0x...