GA-H170N-WIFI / Skylake 10.13 (High Sierra) Install

Build

• Motherboard: Gigabyte GA-H170N-WIFI (rev 1.0)
• CPU: Intel Core i7-6700T
• RAM: Kingston HyperX Fury Black 8GB (2x4GB) DDR4-2133
• SSD: Intel SSD Pro 180GB (SSDSCKJF180A5) m.2
• WiFi: Broadcom BCM94352Z
• Case: Realan E-W60 (Black)
• PSU: Realan 120W/12VDC Pico
• Cooling: Noctua NH-L9i
• Case Fans: (2x) Evercool 50x10mm

Pictures

Pictures can be seen in the album here.

Notes

Surprisingly, this build went rather flawlessly. As far as I can tell, everything is working perfectly (e.g. iGPU, Sound, Ethernet, WiFi, Bluetooth, etc) -- even the Recovery mode works. Installation was pretty straight forward.

Install / Configuration

1. UniBeast

• macOS 10.13.3 w/ UniBeast (followed guide here)

2. MultiBeast

• Clover EFI
• Audio
  • 100 Series Audio
  • ALC1150
• Graphics Configuration
  • Intel HD 530
  • IntelGraphicsFixUp
• USB
  • Increase Max Port Limit
• Ethernet
  • IntelMausiEthernet v2.3.0
• System Definition
  • iMac17,1

3. WiFi (Post-install)

• OSX BrcmPatchRAM by RehabMan

  • BrcmFirmwareData.kext
  • BrcmPatchRAM2.kext

• OSX Fake PCI ID by RehabMan

  • FakePCIID_Broadcom_WiFi.kext
  • FakePCIID.kext

• OSX USB Inject All by RehabMan

  • USBInjectAll.kext

4. Audio (Post-install)

• audio_cloverALC by toleda
• audio_CloverHDMI by toleda
• Clover
  • Configuration/Devices/UseIntelHDMI (true)

5. Recovery mode

• Recovery HD partition with El Capitan by jimmyfoz