OpenCore 0.6.4 Big SUR + INTEL UHD 630 iGP Dual Screen (DP + HDMI) solved

Specifications :

• Processor : Intel Core i9 - 9900K
• Motherboard : MSI MAG Z390 TOMAHAWK
• iGPU : Intel UHD 630
• dGPU : NVIDIA GTX 1050 Ti (Disabled, because not supported)
• RAM : 16GB DDR4 3200Mhz (2x8)
• Storage : 1x SAMSUNG NVMe 970 m2 SSD 500GB + Kingston 240GB SATA SSD
• Ethernet: 1x Intel® I219-V Gigabit LAN controller1x Intel® I211-AT Gigabit LAN controller
• Wifi : ---
• USB + Type-c : Intel Chipset
• Audio Codec : Realtek ALC 892.
• Boot Mode : UEFI
• Bootloader : OpenCore 0.6.4
• OS Version : macOS BigSur 11.0.1

Working Good :

• Sleep, Restart, and Shutdown
• QE/CI Graphics of Intel UHD 630
• CPU Power Management
• Ethernet
• Bluetooth
• Output Audio (NOTE: alcid = 1 is working)
• All Port USB
• Etc

​

INTEL UHD 630 DUAL SCREEN (DP + HDMI) PROBLEM SOLVED:

intel UHD630 dual screen doesn't work issue is slovedhttps://www.tonymacx86.com/threads/guide-general-framebuffer-patching-guide-hdmi-black-screen-problem.269149/Go to this page, and scroll down to bottom until see "Spoiler: MSI Z390M Gaming Edge AC and Coffee Lake CPU". Click this dropdown and copy paste the PciRoot section into your config.plist.

This config works for MSI Z390 Tomahawk + uhd 630. Also you can generate proper port table to your motherboard via HackinTool application.

Actually it is very simple, just read the document and if you don't want to spend too much time, just simply copy paste the solution into your config.plist file.

​

intel UHD 630 dual monitor DP 2K + HDMI 1.4 Full HD

https://preview.redd.it/a58kkjwxy4761.png?width=2560&format=png&auto=webp&s=49fc513ad0ea2b4fcd129a7bef52e2c67040eeb7