OpenCore Newbie Here, just completed successful Mojave -> Monterrey upgrade on Mac Pro 5,1 using OCLP, it was hard (for me).
After a failed install with 480 without using AMD GOP Injection, I selected AMD GOP injection.
This install worked, with GOP injection selected.
But now, when OCLP offers to patch the internal disk ,
OCLP proposes a build WITHOUT AMD GOP injection.
Is this just what OCLP does by default, or does it know something I do not about my system ???
OCLP correctly identifies GPU make and model ,architecture (Polaris), metal capability (yes), etc.
I am torn between : do what already worked (AMD GOP Injection), OR go with OCLP's suggestion (No GOP Injection.) But I've already been burned once by attempted install without the injection.
What should I do?
Here are the two build logs to compare:
First Build Log - Successfully Upgraded to Monterrey
Building Configuration on model: MacPro5,1
Build folder already present, skipping
Deleting old copy of OpenCore folder
- Adding OpenCore v0.9.6 RELEASE
- Adding config.plist for OpenCore
- Adding Lilu.kext 1.6.7
- Enabling Rosetta Cryptex support in Ventura
- Adding CryptexFixup.kext 1.0.2
- Adding SurPlus Patch for Race Condition
- Adding NoAVXFSCompressionTypeZlib.kext 12.3.1
- Adding NoAVXFSCompressionTypeZlib-AVXpel.kext 12.6
- Enabling legacy power management support
- Adding AppleIntelCPUPowerManagement.kext 1.0.0
- Adding AppleIntelCPUPowerManagementClient.kext 1.0.0
- Overriding ACPI SMC matching
- Adding ASPP-Override.kext 1.0.1
- Adding ExFatDxeLegacy.efi
- Enabling CSM support
- Adding PCI Bus Enumeration Patch
- Adding AppleMCEReporterDisabler.kext 1.0.0
- Adding Intel82574L.kext 1.0.0
- Adding ECM-Override.kext 1.0.0
- Adding CatalinaIntelI210Ethernet.kext 1.0.0
- Found Wireless Device 14E4:432B
- Adding corecaptureElCap.kext 1.0.2
- Adding IO80211ElCap.kext 2.0.1
- Failed to find GFX0 Device path, falling back on known logic
- Adding WhateverGreen.kext 1.6.6
- Found dGPU (1): 1002:67DF
- Found dGPU (1) at PciRoot(0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)
- Adding Mac Pro, Xserve DRM patches
- Adding AppleALC.kext 1.6.3
- Adding AMDGOP.efi
- Adding AppleGraphicsPowerManagement Override
- Adding KDKlessWorkaround.kext 1.0.0
- Fixing Legacy Bluetooth for macOS Monterey
- Adding BlueToolFixup.kext 2.6.8
- Adding Bluetooth-Spoof.kext 1.0.0
- Adding SATA Hibernation Patch
- Fixing PCIe Storage Controller (1) reporting
- Fixing PCIe Storage Controller (2) reporting
- Enabling SMC exemption patch
- Adding SMC-Spoof.kext 1.0.0
- Adding ipc_control_port_options=0 to boot-args
- Adding AutoPkgInstaller.kext 1.0.3
- Set SIP to allow Root Volume patching
- Allowing FileVault on Root Patched systems
- Enabling KC UUID mismatch patch
- Adding RSRHelper.kext 1.0.0
- Disabling SecureBootModel
- Enabling AMFIPass
- Adding AMFIPass.kext 1.4.0
- Adding FeatureUnlock.kext 1.1.5
- Adding additional FeatureUnlock args: -disable_sidecar_mac
- Disabling memory error reporting
- Setting RestrictEvents block arguments: pcie
- Adding RestrictEvents.kext 1.1.3
- Setting RestrictEvents patch arguments: sbvmm
- Adding USB-Map.kext
- Adding UHCI/OHCI USB support
- Adding CPUFriend.kext 1.2.7
- Adding OpenCanopy GUI
- Setting custom OpenCore picker timeout to 8 seconds
- Adding bootmgfw.efi BlessOverride
- Enabling SMC exemption patch
- Setting macOS Monterey Supported SMBIOS
- Using Model ID: MacPro7,1
- Using Board ID: Mac-27AD2F918AE68F61
- Using Minimal SMBIOS patching
- Setting Firmware Feature: 8c01c1403
- Cleaning up files
- Validating generated config
Second Build Log (Proposed by OCLP for Patching the Internal Disk - Not Applied Yet)
- Adding OpenCore v0.9.6 RELEASE
- Adding config.plist for OpenCore
- Adding Lilu.kext 1.6.7
- Enabling Rosetta Cryptex support in Ventura
- Adding CryptexFixup.kext 1.0.2
- Adding SurPlus Patch for Race Condition
- Adding NoAVXFSCompressionTypeZlib.kext 12.3.1
- Adding NoAVXFSCompressionTypeZlib-AVXpel.kext 12.6
- Enabling legacy power management support
- Adding AppleIntelCPUPowerManagement.kext 1.0.0
- Adding AppleIntelCPUPowerManagementClient.kext 1.0.0
- Overriding ACPI SMC matching
- Adding ASPP-Override.kext 1.0.1
- Adding ExFatDxeLegacy.efi
- Enabling CSM support
- Adding PCI Bus Enumeration Patch
- Adding AppleMCEReporterDisabler.kext 1.0.0
- Adding Intel82574L.kext 1.0.0
- Adding ECM-Override.kext 1.0.0
- Adding CatalinaIntelI210Ethernet.kext 1.0.0
- Found Wireless Device 14E4:432B
- Adding corecaptureElCap.kext 1.0.2
- Adding IO80211ElCap.kext 2.0.1
- Found dGPU (1): 1002:67DF
- Found GFX0 Device Path: PciRoot(0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)
- Found GPU Arch: Archs.Polaris
- Adding WhateverGreen.kext 1.6.6
- Found dGPU (1): 1002:67DF
- Found dGPU (1) at PciRoot(0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)
- Adding Mac Pro, Xserve DRM patches
- Adding AppleALC.kext 1.6.3
- Adding AppleGraphicsPowerManagement Override
- Adding KDKlessWorkaround.kext 1.0.0
- Fixing Legacy Bluetooth for macOS Monterey
- Adding BlueToolFixup.kext 2.6.8
- Adding Bluetooth-Spoof.kext 1.0.0
- Adding SATA Hibernation Patch
- Fixing PCIe Storage Controller (1) reporting
- Enabling SMC exemption patch
- Adding SMC-Spoof.kext 1.0.0
- Adding ipc_control_port_options=0 to boot-args
- Adding AutoPkgInstaller.kext 1.0.3
- Set SIP to allow Root Volume patching
- Allowing FileVault on Root Patched systems
- Enabling KC UUID mismatch patch
- Adding RSRHelper.kext 1.0.0
- Disabling SecureBootModel
- Enabling AMFIPass
- Adding AMFIPass.kext 1.4.0
- Adding FeatureUnlock.kext 1.1.5
- Adding additional FeatureUnlock args: -disable_sidecar_mac
- Disabling memory error reporting
- Setting RestrictEvents block arguments: pcie
- Adding RestrictEvents.kext 1.1.3
- Setting RestrictEvents patch arguments: sbvmm
- Adding USB-Map.kext
- Adding UHCI/OHCI USB support
- Adding CPUFriend.kext 1.2.7
- Adding OpenCanopy GUI
- Setting custom OpenCore picker timeout to 8 seconds
- Adding bootmgfw.efi BlessOverride
- Enabling SMC exemption patch
- Setting macOS Monterey Supported SMBIOS
- Using Model ID: MacPro7,1
- Using Board ID: Mac-27AD2F918AE68F61
- Using Minimal SMBIOS patching
- Setting Firmware Feature: 8c01c1403
- Cleaning up files
- Validating generated config
[link] [comments]
Comments
Post a Comment