iATKOS | United Kingdom

Guide:

Installing macOS Sonoma on your Acer Helios 300 PH315-53-527E laptop can be achieved with careful preparation and following the necessary steps. Here's a guide to help you through the process:

1. Prepare the macOS Sonoma Installer:

• Download the macOS Sonoma installer from the App Store on a Mac system.
• Create a bootable USB installer using software like GibMacOS or createinstallmedia.

2. Gather Necessary Files:

• Download the required EFI folder for your laptop model from Hackintosh community forums or repositories.
• Ensure you have the necessary kexts for your hardware components (e.g., Wi-Fi card, Ethernet, audio, etc.).

3. BIOS Settings:

• Access your laptop's BIOS settings by pressing the designated key during startup (usually Del or F2).
• Disable Secure Boot, Fast Boot, and TPM.
• Set SATA Mode to AHCI.

4. Configure OpenCore:

• Install OpenCore bootloader to your USB installer.
• Configure your config.plist file with appropriate settings for your hardware. Pay attention to ACPI patches, kernel patches, and drivers.

5. Prepare USB Installer:

• Copy the EFI folder to the EFI partition of your USB installer.
• Ensure that the USB installer is formatted as GUID Partition Map and macOS Extended (Journaled).

6. Boot from USB Installer:

• Insert the USB installer into your laptop.
• Boot into the BIOS and select the USB drive as the boot device.
• Select the macOS installer from the OpenCore boot menu.

7. Install macOS Sonoma:

• Follow the on-screen instructions to install macOS Sonoma on your laptop's drive.
• Format the target drive using Disk Utility if necessary.

8. Post-Installation Setup:

• After installation, boot into macOS from the USB installer using OpenCore.
• Install necessary kexts to enable hardware components not working out of the box.
• Configure audio, Wi-Fi, Bluetooth, and other hardware components using appropriate kexts and patches.

9. Finalize Configuration:

• Once everything is working properly, transfer the EFI folder from the USB installer to your laptop's EFI partition.
• Reboot your laptop without the USB installer and ensure that macOS boots correctly from the internal drive.

10. Troubleshooting:

• If you encounter issues during installation or post-installation, refer to online resources, forums, or community guides for troubleshooting steps specific to your hardware configuration.

By following these steps carefully and being patient with the process, you should be able to successfully install macOS Sonoma on your Acer Helios 300 PH315-53-527E laptop and enjoy a Hackintosh experience. Remember to back up your important data before proceeding with the installation.