Hardware:
CPU: i5-10600k
GPU: igpu (for now notes below)
RAM: Nemix 2x8gb DDR4 2400 (Samsung chips, defaults to 2667)
Motherboard model: Gigabyte H470M DS3H
Screen(s) Number: 1 (for now)
Screen(s) Resolution: 1920x1080
Audio Codec: intelmausi
Ethernet Card: intel gbe
Wifi/BT Card: (if available) N/A
What guide/tool I followed: https://dortania.github.io/
What part I got an issue with: This has, in fact, been a nightmare. This is my 4th personal Hackintosh, and even the laptop was easier than this. 1st Issue, No matter what I try, versions of OC from 5.6 to 7.3, all sorts of different settings... the USB Installer will NOT show up. So... used VM to install Catalina to NVME, USB contains Big Sur currently... neither of those matter. Limiting to the Catalina install as 7.3 can see it... attempting to boot yields a very quick panic. OC log is incomplete a comparison of the screenshot and log show they stopped at different places. I have tried following every troubleshooting step straight down the list on dortania and got nada. Most of the recommendations do not even make a change to where it fails, some fail earlier. https://imgur.com/Hj5C1po
What files/config I am using: https://i.imgur.com/x7SVD9k.png
https://drive.google.com/drive/folders/1C1bJx4Eqm62RN7h4qr95M0LKVP9QmPMn?usp=sharing note* apparently the system clock is off on this system... logs are from about 6-7 hours in the future.
Extra Info: Doesn't matter for now, but intent with system is to setup as simple a/v system running qlab. I have done this 3 times before, all still working systems. Plan is to add 2x AMD R5 340x and maybe a Blackmagic Monitor for video outs.
[link] [comments]
Comments
Post a Comment