How to Fix APPLE LOGO VANISHED AFTER VERBOSE CODE
This is a comprehensive guide to resolve the issue described in the post. Ensure you follow all steps carefully.
1. Prerequisites
- Hardware compatibility: Verify your exact Mac or PC model, CPU, GPU, and Wi-Fi/Bluetooth chipset.
- Required tools: Have OpenCore, OCLP, ProperTree, and a USB installer ready.
2. Compatibility Snapshot
- Check if your hardware is fully supported by the target macOS version. OCLP supports many models, but some have limitations.
3. Installation Preparation
- Configure your BIOS/UEFI settings appropriately.
- Create a USB installer matching your target macOS.
4. EFI and config.plist Review
- Review your EFI folder layout: BOOT, OC/ACPI, OC/Drivers, OC/Kexts, OC/Tools.
- Ensure essential kexts like Lilu, VirtualSMC, and WhateverGreen are present.
5. Post-Installation
- Run OCLP Post-Install Root Patch if you are on an unsupported Mac.
- Check graphics acceleration, Wi-Fi, and Bluetooth.
6. Troubleshooting
Reported issue
- For this specific issue, verify your kexts and patches are up to date.
- Check system logs and use verbose mode to identify errors.
Common Hackintosh/OCLP checks
- Stuck at Apple logo: Check verbose logs.
- No graphics acceleration: Verify Metal support.
7. Dual Boot and Advanced Configuration
- If dual booting, use separate disks when possible to avoid EFI overwrites.
8. Verification, Maintenance and Rollback
- Verify the fix worked and keep dated EFI archives.
- Have a rollback plan using Time Machine or a previous EFI.
9. References and Glossary
Original Question: "APPLE LOGO VANISHED AFTER VERBOSE CODE"
APPLE LOGO VANISHED AFTER VERBOSE CODE
 | hi eneryone, (Please excuse my poor English.) i've built for my first hackintosh, and i'm currently trying to install macos tahoe 26 by using an .rdr file following the instructions in this youtube tutorial: https://youtu.be/-JlOk5tGCkc?si=WmU2Ct6p0asv66jS after the verbose code, my screen monitor turn off, and i dont even know why Here is where the diagnostic information stops loading: For my BIOS settings, I went on multiple forums and looked at what they did. This is what I've done: - Disabled VT-d settings -Disabled secure boot, fast boot -disable CSM - os type to other os -Turn off internal serial and parallel port -Turn off network stack for boot -Enabled decode over 4G Set DMVT pre-alloc to 128mb -Set USB legacy to enabled here are my specs: cpu: intel core i3 7100 mainboard: asus h110m-c/hdmi ram: 8gb gpu: hd 630 efi: https://drive.google.com/drive/folders/1Hhpq_HokqXIMGw2lq8IUdQSrpU1TOn43?usp=sharing pls help me if you can!!! thank you for reading.!!! [link] [comments] |
Post a Comment