How to Fix Cant figure this out!
This is a comprehensive guide to resolve the issue described in the post. Ensure you follow all steps carefully.
1. Prerequisites
- Hardware compatibility: Verify your exact Mac or PC model, CPU, GPU, and Wi-Fi/Bluetooth chipset.
- Required tools: Have OpenCore, OCLP, ProperTree, and a USB installer ready.
2. Compatibility Snapshot
- Check if your hardware is fully supported by the target macOS version. OCLP supports many models, but some have limitations.
3. Installation Preparation
- Configure your BIOS/UEFI settings appropriately.
- Create a USB installer matching your target macOS.
4. EFI and config.plist Review
- Review your EFI folder layout: BOOT, OC/ACPI, OC/Drivers, OC/Kexts, OC/Tools.
- Ensure essential kexts like Lilu, VirtualSMC, and WhateverGreen are present.
5. Post-Installation
- Run OCLP Post-Install Root Patch if you are on an unsupported Mac.
- Check graphics acceleration, Wi-Fi, and Bluetooth.
6. Troubleshooting
Reported issue
- For this specific issue, verify your kexts and patches are up to date.
- Check system logs and use verbose mode to identify errors.
Common Hackintosh/OCLP checks
- Stuck at Apple logo: Check verbose logs.
- No graphics acceleration: Verify Metal support.
7. Dual Boot and Advanced Configuration
- If dual booting, use separate disks when possible to avoid EFI overwrites.
8. Verification, Maintenance and Rollback
- Verify the fix worked and keep dated EFI archives.
- Have a rollback plan using Time Machine or a previous EFI.
9. References and Glossary
Original Question: "Cant figure this out!"
Cant figure this out!
 | macOS Tahoe installer gray screen on i7-6500U Hackintosh — SMBIOS issue or HD 520 graphics issue? I'm trying to install macOS Tahoe on a laptop with these specs:
Originally I was using I found a guide that says: Since Tahoe dropped support for a lot of older Intel Macs, I'm wondering if my SMBIOS is the problem. Questions:
Any advice would be appreciated. If needed, I can post my iGPU: Intel HD 520 Bootloader: OpenCore No dedicated GPUOriginally I was using MacBookPro13,2, then tried MacBookPro13,3 because I found an EFI online that booted. However, I'm getting a gray screen during boot and can't get into the installer.I found a guide that says:"If you get this error, this is due to a mismatch between the macOS version you are trying to install and the Mac SMBIOS you are using. Check the Mac SMBIOS supported by the macOS version you are trying to install. Then change the SystemProductName."Since Tahoe dropped support for a lot of older Intel Macs, I'm wondering if my SMBIOS is the problem.Questions:What SMBIOS are people successfully using with Skylake laptops on Tahoe? Has anyone booted Tahoe with an i7-6500U and HD 520? Should I be using MacBookPro16,2 or something else? Does a gray screen usually indicate an SMBIOS mismatch, or is it more likely an HD 520 framebuffer/WhateverGreen issue? Are there any Tahoe-specific OpenCore settings I should check?Any advice would be appreciated. If needed, I can post my config.plist, DeviceProperties, and boot logs. And also after choosing MacPro7,1 I was able to get past the gray 🚫 symbol and some lines of code ran and I saw in memory panic stackshot succceded. EFI FILE: https://drive.google.com/drive/folders/1cbOVPwdlWn8jOZKlVwZsdIfC_03d-1Q9?usp=sharing Screenshot of memory stackshot. [link] [comments] |
Post a Comment