Monitor Falling Asleep During Install - Mojave

Hey everyone, pardon my formatting. I hope I can give you enough information to help determine the issues I'm having with my installation process. A little background, I have set up a Hackintosh before using the Uni/Multibeast method. However, upon browsing forums this time around, I wanted to go with a Vanilla install in order to make sure the new Hackintosh isn't missing anything crucial for it's performance.

​

For my config.plist, I used the sample provided by /u/Corpnewt's guide, per the recommendation from this guide. The only other things I added that were not included in the guide were two USB kexts (XCHI-unsupported & USBInjectAll). Currently, I'm getting to about over halfway through the USB Installation process and get stalled when my monitor goes to sleep. I'm not sure what has caused it, and I've been doing some research for the past week now to no avail.

​

I have broken down my hardware below, as well as detailed my BIOS settings. I have also uploaded my CLOVER on Dropbox for your convenience.

​

Hardware:

• CPU: Intel i5-8400
• GPU: Intel UHD 630
  • I plan on getting a separate GPU later but as of now the only one I have unhand isn't Mojave compatible so I'm just going with the CPUs internal graphics.
• RAM: Ballistix Sport LT 16GB Kit (8GBx2) DDR4 2400
• Motherboard/Laptop model: GIGABYTE H370M D3H
• Audio Codec: Realtek ALC892 codec
• Ethernet Card: Intel GbE LAN chip (10/100/1000 Mbit)
• Wifi/BT Card: none - plan on adding a BT card later
• What guide/tool followed:
  • Build a Perfect Hackintosh - Beginners Tutorial - Link to Youtube Video
  • /r/Hackintosh Vanilla Desktop Guide - Link to Guide
• What part I got an issue with: My monitor is falling asleep just over halfway through the installation. I have uploaded a screen cap of what I see just before it cuts to black.

Pardon the small text, I'm using an ASUS PB287Q Monitor - 28\" 4K

• What files/config I am using:
  • Config: Sample from Corpnewt's guide.
  • Kexts:
    • FakeSMC_ACPISensors
    • FakeSMC_CPUSensors
    • FakeSMC_GPUSensors
    • FakeSMC_LPCSensors
    • FakeSMC_SMMSensors
    • FakeSMC
    • Lilu
    • USBInjectAll
    • WhateverGreen
    • XCHI-unsupported

BIOS Information

• System
  • Model Name: H370M D3H
  • BIOS Version: F3
  • BIOS Date: 03/01/2018
  • BIOS ID: 8A0FAG0I
• BIOS
  • Bootup NumLock State: On
  • Security Option: System
  • Full Screen LOGO Show: Enabled
  • Fast Boot: Disabled
  • CSM Support: Disabled
  • Secure Boot:
    • Secure Boot Enable: Disabled
    • Secure Boot Mode: Custom
    • Key Management:
    • Provision Factory Defaults: Disabled
• Peripherals
  • Initial Display Output: IGFX
  • Above 4G Decoding: Disabled
  • Intel Platform Trust Technology (PTT): Enabled
  • Software Guard Extensions (SGX): Software Controlled
  • Trusted Computing:
    • Security Device Support: Enable
  • Super IO Configuration
    • Serial Port: Disabled
    • Parallel Port: Disabled
  • Intel BIOS Guard Support: Disabled
  • USB Configuration:
    • Legacy USB Support: Enabled
    • XHCI Hand-off: Enabled
    • USB Mass Storage Driver Support: Enabled
    • Port 60/64 Emulation: Enabled
  • Network Stack Configuration
    • Network Stack: Disabled
  • SATA and RST Configuration
    • SATA Controller(s): Enabled
    • SATA Mode Selection: AHCI
    • Aggressive LPM Support: Enabled
    • SATA0
    • Software Preserve: Samsung SSD 85 (120.0 GB)
    • Port 0: Enabled
    • Hot Plug: Disabled
• Chipset
  • VT-d: Disabled
  • Internal Graphics: Enabled
  • DVMT Pre-Allocated: 64M
  • DVMT Total Gfx Mem: 256M
  • Audio Controller: Enabled
  • PCH LAN Controller: Enabled
  • Wake on LAN Enable: Enabled
  • High Precision Timer: Enabled
  • IOAPIC 24-119 Entries: Enabled
• Power
  • Platform Power Management: Disabled
  • AC BACK: Always Off
  • ErP: Enabled
  • Soft-Off by PWR-BTTN: Instant-Off
  • Resume by Alarm: Disabled
  • Power Loading: Auto
  • CEC 2019 Ready: Disabled
  • RC6 (Render Standby): Enabled

​

Any and all help would be appreciated. Feel free to let me know if anything is missing that may help in determining the problem. Thanks!