i9-13900F | RX 6800XT | B760M-DS3H-DDR4 | Dual Boot

Components

• Gigabyte B760M DS3H DDR4
• Intel i9-13900F (as I have a dGPU and the iGPU is not well supported)
• Gigabyte RX 6800 XT Gaming OC 16 GB (already had this in my previous build)
• 2X Crucial Ballistix 16 GB DDR4 Ram (same as in my previous build)
• Corsair RM650X (same as in my previous build, still manages to work with the increased wattage!)
• WD SN850 500 GB NVME SSD for MacOS (same as in my previous build, never had luck with Samsung SSD on MacOS)
• Windows is running on a Crucial 1 TB NVME SSD

Kexts

• AppleALC
• BlueToolFixup, BrcmFirmwareData, BrcmPatchRAM3 (for bluetooth dongle)
• CpuTopologyRebuild, CpuTscSync, RestrictEvents (added to support the CPU)
• Lilu
• LucyRTL8125Ethernet (replaced IntelMausi)
• NVMeFix (not sure this is needed)
• SMCProcessor, SMCSuperIO, VirtualSMC
• WhateverGreen
• USBToolBox, UTBMap

ACPI

• SSDT-AWAC
• SSDT-EC-USBX
• SSDT-GPRW
• SSDT-PLUG-ALT

Drivers: OpenCanopy, OpenRuntime

OpenCore 0.9.9

https://preview.redd.it/akhrfj5u39uc1.png?width=574&format=png&auto=webp&s=1636b8de415ad9f7fbdfac8b6e6941b9f022eaea

I was looking to upgrade my main driver (https://www.reddit.com/r/hackintosh/comments/b3spgk/z370md3h_rx580_i78700_with_bt_wifi_audio_usb_and/) for a long time, but was a little bit scared as updating the CPU would mean also replace the motherboard.

In the end I went for a really similar motherboard and prepared the EFI in advance by double checking many of the sources online 4 to 5 times :) It paid off because everything booted at the first try with the EFI I prepared...and I was really surprised by that.

I only had to re-do USB mapping (from Windows) and fix the audio by changing the layout id (although that was not super important).

So far everything is working, I just need to run some benchmark because the CPU is indeed thermal throttling sometimes (there is not enough ventilation in my case). But it seems that MacOS is recognizing all the threads.