HARDWARE
CPU: Intel Core i9-9900K
GPU: Sapphire Radeon Nitro+ RX 590 8GB
RAM: Ballistix Sport LT 64G DDR4
Motherboard model: Gigabyte Z390 AORUS PRO WIFI LGA 1151 (Intel)
Screen(s) Number: 1
Screen(s) Resolution: 1920x1080 (temporarily)
Audio Codec: not sure
Ethernet Card: Built-in
Wifi/BT Card: Built-in + fenvi T919 (BCM94360CD)
What guide/tool I followed:
r/hackintosh Vanilla Desktop Guide (Coffee Lake)
What part I had an issue with:
Adjusted my BIOS settings using u/PacPera's z390 Designare settings. Here's a picture of the only settings I changed from the default.
Plugged the USB (Catalina installer) in.
Installer gets stuck at 2 minutes remaining. It's also frozen. I can't move the mouse. I let it sit at 2 minutes for about 20 minutes before giving up. Tried 2 times using different USB ports (first blue then red).
I read in another thread where a guy got stuck at 2 minutes that what you do at this point is power it off, re-boot into Clover, and you'll see a new Mac boot option called Preboot. Then you run that and the installation will continue. So I did this, the option was there (I couldn't confirm it was called Preboot using my clover theme), but the installation continued. It quickly chugged from 16 minutes to 13 minutes (picture of what this looks like) then it jumped back into verbose for the kernel panic. Never made it past 13 minutes. Tried this song and dance 3 times.
Here's a picture of the kernel panic printout I received at the end.
What files/config I am using:
Screenshot of my Clover folder (kexts and drivers)
Extra Info:
Currently have Windows 10 Pro installed on an M.2 that works perfectly. I am trying to install this new Vanilla install on a 1TB SSD. I also should note that I also have a Blackmagic Design DeckLink Mini Recorder 4K PCIe Capture Card installed.
[link] [comments]
Post a Comment