How to Fix Help Needed: Stuck on Apple Logo with loading bar on macOS

How to Fix Help Needed: Stuck on Apple Logo with loading bar on macOS

Wi-Fi, Bluetooth, AWDL, Continuity and Location Services problems usually come from chipset support, kext pairing, privacy settings or network-location corruption. On Hackintosh systems, Location Services and Continuity depend on working Wi-Fi, Bluetooth, AWDL and correct AirportItlwm or itlwm/HeliPort behaviour.

Quick Checks

• Backup current state: Save a copy of your working EFI and run a full system backup before changing settings.
• Identify hardware components: Note down your exact CPU, GPU, Wi-Fi card, and motherboard/laptop model.
• Ensure utility alignment: Keep OpenCore, OCLP, and ProperTree updated.

Fix Steps

1. Create a rollback point: Make a Time Machine backup and keep a copy of your last working EFI folder before editing OpenCore, kexts or root patches.
2. Confirm the exact chipset: Identify the Wi-Fi, Bluetooth and Ethernet controller from System Information, Hackintool or Linux/Windows device manager.
3. Use the correct network stack: Match AirportItlwm, itlwm, HeliPort, IntelBluetoothFirmware and BlueToolFixup to the exact macOS version.
4. Reset macOS network state: Remove the current Wi-Fi service, reboot, add it again, then reconnect to a simple WPA2 network before testing advanced features.
5. Check privacy permissions: Open System Settings and confirm Location Services, Maps, Weather and system services are enabled.
6. Test Apple features separately: Verify normal internet first, then Bluetooth, then AirDrop/Continuity. Do not debug all three at the same time.

Verify It Worked

• Maps can locate you without falling back to a stale location.
• Wi-Fi reconnects after reboot and sleep.
• Bluetooth remains available after a cold boot.
• Console no longer shows repeated wireless or location daemon errors.

Rollback

• Restore the previous EFI if Wi-Fi disappears completely.
• Switch from AirportItlwm to itlwm + HeliPort, or the reverse, if the issue is specific to one driver path.
• Use Ethernet or USB tethering while testing so you do not lose access to downloads.

Related iATKOS Searches

• OpenCore · OCLP · EFI · kexts · config.plist · macOS troubleshooting

Original Question: "Help Needed: Stuck on Apple Logo with loading bar"

I’m in a bit of a stressful situation and could really need some help. I have a MacBook Pro Retina 15-inch (Late 2013) that was previously running macOS Big Sur. My wife has an important CELBAN and Nclex exam coming up, and unfortunately, the CELBAN exam software doesn’t support Big Sur. I had no choice but to update the macOS. I used the latest version of OpenCore Legacy Patcher (OCLP) to install macOS Sequoia. The initial update wently smoothly, and Sequoia was installed. I did the root patches installation, but even after rebooting, my Mac still required the USB drive to reboot. I reinstalled the root patches a couple of times, but nothing worked. Thinking I might have missed a step, I decided to start the process over. That’s where things went wrong. Now, I’m stuck with the Apple logo and a loading bar that gets stuck about halfway during the reinstallation process of Sequoia. Here’s what I’ve tried so far: 1. Reinstalling macOS Sequioa using Internet Recovery, but I get a “no internet” error because Wi-Fi isn’t working. 2. Booting without the USB, but it won’t boot at all. 3. NVRAM and SMC resets. I’m in a bind because I didn’t back up my data (I didn’t have another USB drive available). My wife’s exam is fast approaching, and I can’t afford to lose the data on the Mac. Went through github FAQs on Stuck at boot logo but in terminal I can’t find the specific directory. Does anyone know how I can fix this? Any guidance would be deeply appreciated! Thank you in advance! submitted by /u/kd_kd [link] [comments]