iATKOS | United Kingdom

Instructions for the dmg image file: -  Before anything, check the md5 of the iATKOS_ML2.dmg file you downloaded. The correct md5 of iATKOS_ML2.dmg >>> 2aa379fc63fa20ad95e046e14a8b30d4 If the md5 of your dmg file does not match the md5 above, then you have a faulty file. In this situation anything including freezes, boot errors, any kind of error messages causing frustration of your soul is possible! Take my word. OS X: DVD/Blu-Ray:   Burn  the dmg image to a blank Dual Layer DVD (±R, ±RW) or Blu-Ray Disk (BD-R, BD-RE) using Disk Utility on OS X and then you are ready to boot with the disk and install OS X to your computer. Burn the disc at the minimum speed   and verify the recording process, otherwise you may have a faulty disc of iATKOS ML2 which is as same as a faulty dmg image. USB HDD/Flash Drive/Stick:  Restore the dmg image to a USB HDD/Stick using OS X Disk Utility and install the chameleon bootloader to the USB target using  this  pk...

Hi, My laptop is Dell Vostro 1014 Intel Core 2 Duo CPU T6670 2 GB RAM Graphics: GM 4500 MHD 500 GB HDD Chipset is GM 45 SS3 Graphics Details: GM 4500 MHD ID : 0x2a42 0x0007 Please help me to Install IATKOS ML2.....I installed snow leopard worked fine... but the graphics was a big problem , as i am not getting a proper resolution, so i am trying to move on to ML2..so when i initially tried for installation i was getting a panic, so i deleted the drivers and after that... this following command helped me to enter the installation of IATKOS ML2 -v -x -f npci=0x2000... but as soon i enter to installer window, the mouse started flickering ...so i tried with GraphicsEnabler=No and also tried with yes...0x0007 but no of these worked.Tried with PciRoot=0 , tried cpus=1, tried UseKernalCache=No, tried with npci=0x3000, but was getting still the same problem. Any how i managed to install ML2 but it was not booing up properly, so -v -x -f npci=0x2000, worked ...but it is safe boot... mose was sti...

Starting the Installation: - Boot your computer from iATKOS ML2 media  (Dual Layer DVD, Blu-Ray or USB Media) Most OSX86 compatible computers will be able to boot iATKOS ML2 media by default (without entering commands), but some computers will need some boot flag(s)/command(s) to be entered at boot promt. If you are booting from DVD/Blu-Ray, then you need to press F8 in first 10 seconds for boot promt. Common boot flags/commands for iATKOS ML2 install media: - You can enter without quotes ("). - You can try combinations by adding a space between them, i.e. "-v cpus=1". "GraphicsEnabler=Yes"  This is needed for Intel HD 4000 installation. "cpus=1"  This may be needed for some 2011 socket motherboards and some laptop computers. TSC Sync should be selected for those 2011 socket motherboards during install. Kernel Patcher should be selected for those problematic laptop computers. "UseKernelCache=No"  This command is needed for computers that fre...

Multiboot: iATKOS ML2 has no integrated procedure for multibooting but preparing a multiboot GPT or MBR system with this release is easy. Here is a ''How To'' for GPT and MBR triple boot including Mac-Win-Linux. iATKOS ML2, Debian GNU/Linux DVD and Windows7 DVD installers are used in this example. - MBR (Master Boot Record) triple boot - - Nearly all PC's work on MBR partitioned harddisks. Check it with Disk Utility and if so do no touch it. If it is GPT then you need to repartition your harddisk that will cause to loose all the data in it. Click to partitioning options, select MBR and do the partitioning. - Create 3 or more partitions by using iATKOS Disk Utility or Parted Magic Live CD. Mac OS Extended Journaled (HFS+) format for OS X target, MS-DOS (Fat32) for the others. OS targets must be one of the first 3 partitions creating with Disk Utility. - Add boot flag to Windows or Linux target and install the operating systems in any order you like. For windows, make...

Simple Troubleshooting guide: At times  after installation , your system may not work properly as in > it may restart, not boot at all or hang at a certain point. These are quite normal and there are some steps to be taken in these cases. It varies from one case to another. This basic troubleshooting guide may help you to solve most of the common problems. - If you're facing hangs, freezes or kernel panics (which is present as a shutdown symbol on the grey screen just after boot) type "-v" (without quotes) at the boot promt and press enter. This would give you verbose output which is useful for the solution. You can take a photo of the verbose screen at the point of freeze and post it on our forum or on other OSX86 development platforms to get help. - To pass the freeze/hang or kernel panic, you may try boot with "-x -v" (without quotes) which boots the computer in safe mode. Then you may have the chance to reach up to OS X GUI to solve your problem. - White,...

evertime i must boot to iatkos ml2 using iatkos ml2 dvd how to solve this problem ? plz help me source http://feeds.feedburner.com/tonymacx64 source

I just got a new laptop Acer 571p-6642 with Intel core i5 3337u 1.8Ghz Ivy Bridge 6GB DDR3-PC3-12800 500GB Sata Hard Drive Intel HD4000 Bios Ver. 2.17 I download iAtkos ML2 and used virtualbox with iAtkos ML2 installed to erase and format my 16Gb usb drive. I used clone copier to move .dmg to the usb and then installed chameleon to allow the usb to boot. I don't have much settings in my bios, Only Sata mode: AHCI and I run UEFI for windows and switched it to Legacy boot to install iAtkos ML2 on my laptop. It ran fine until I rebooted which displayed "You computer must restart" I then restarted into -v to see what was wrong and displayed some CPU Error 0x3 Unknown cpu and also something along with cpu power. I can only boot into Safe Boot -x which loads perfect with only ethernet working. Anyway I can get my computer working normal? Sorry I am a little new but more experienced in windows OS source

Information: - 64-bit/32-bit thing: Mac OS X Mountain Lion is a 64-bit operating system which means that it can only boot in 64-bit mode. 32-bit applications will work but loading a 32-bit compiled driver/module/kext is not possible for Mountain Lion. Therefore applications that need their own 32bit-only modules (kexts) may partially or totally fail. - You can make clean, upgrade and refresh installs to your existing OSX86 system using iATKOS ML2. Please read the related section. - Easy installation on Software RAID volumes. No additional user actions needed. Please read the related section. - nvidia graphics cards will have less problems with OS X 10.8 using iATKOS ML2 because of the automated id injection. - Network devices will be auto-detected. - Onboard sound devices will be auto-detected. Thanks to Andy Vandijck and Voodoo team. - Using software updater to apply main system updates just like real Macs on most computers is possible using iATKOS ML2. Please read the related section...

Software RAID: Information: - Software RAID combines two or more physical harddisks or their partitions (RAID slices) into a single logical unit. RAID's various designs involve two key design goals: increase data reliability and/or increase input/output performance. - You can create RAID volumes and install Lion on RAID using iATKOS ML2. - RAID levels or types for OS X: Striped RAID (RAID-0):  A RAID-0 set splits data evenly across multiple disks with no parity information for redundancy. RAID0 is normally used to increase performance for both read and write. It can also be used as a way to create a small number of large virtual disks out of a large number of small physical ones. Simply it is a way to use the disks like using the dual or more channel RAMs, so it increases the read and write performance more than a bit. RAID0 sets are advised for the main system volumes to increase the performance of the OS. Mirrored RAID (RAID-1):  A RAID-1 set creates an exact copy of a set o...