Hello /r/Hackintosh, I'm currently having some issues with my iGPU under the latest release of Mojave (10.14.4).
The update from HS went fine and I already have the clover bootloader updated as well as my kexts, which are:
-FakeSMC ofc
-Lilu
-Whatevergreen
-AppleALC
-Realtek RTL8111
-USBInjectAll
I'll leave a .zip with my Clover folder so you guys can take a look but first I'll explain what's going on:
First off, I'm using the new method (I've also tried the old method* - didn't work) for enabling for iGPUs:
*enabling the igpu using the graphics tab under CC and intelgraphicfixup (I even tried it with whatever green ffs)
-leave graphics tab blank on CC
-under devices -> properties -> PciRoot(0x0)/Pci(0x2,0x0) and AAPL,ig-platform-id 0A006601
no fake IGFX id, IMEI set as 0x1E3A8086
My SMBIOS is set as iMac 13,2 as recommended by CorpNewt's updated Ivy Bridge guide, most of the things I've set on my config.plist are according to his guide. For convenience reasons I used clover's menu to change the iGPU ID according to recommendations.
I've tried (I know it should be switched beforehand from 0xAABBCCDD to DDCCBBAA but I've tried both for each and none worked)
-0x01620005 and 05006201
-0x01620007 and 07006201
-0x0162000A and 0A006201
-->What actually happens? either:
1 - The system boots with basic graphics (slowly, even though it's on a SSD) but the about this Mac section doesn't provide any iGPU info, either completely empty or 3MB)
2 - The system hangs on the apple logo loading screen
3 - The system boots with basic graphics - low res, no QE/CI and reports the iGPU but, you've guessed it: 3MB
4 - The system boots with graphics so glitched out I can't tell if it's a modern art painting or a tryhard desktop from /r/unixporn. Weirdly enough, this is the ONLY instance where the igpu actually seem to be working (transparency, snappy animations, memory and gpu name reported on about this Mac).
In no occasion the system booted with full res.
Heck, I've even tried a recommendation I've found on this very own sub to use a mobile ig-platform-id (can't remember which) and change the smbios to imac13,1 instead - didn't work.
I've spent the whole day trying to fix this and, by now, I've almost given up.
Clover Folder (PS: I've removed board and serial numbers from the config.plist) : https://files.catbox.moe/577i8c.zip
My hardware: i5 3570k (4C/4T) - Intel HD4000, Gigabyte H61M-S2PV, HDMI monitor (also tried using a VGA monitor, didn't work).
PS (again): the SSDT is for intel PM, even before having it inside my clover folder I couldn't get things to work on Mojave.
[link] [comments]
Post a Comment