How to Fix Advices for new hackintosch

By Freirburro
0

opencore

How to Fix Advices for new hackintosch

USB issues are caused by the 15-port limit in macOS, missing USB mapping, or incorrect port configuration.

Quick Fix Steps

  1. Map your USB ports: Use USBToolBox or USBMap to identify active ports and create a custom USBMap.kext.
  2. Respect the 15-port limit: macOS only allows 15 USB ports per controller; map only the ports you actually use.
  3. Check USBInjectAll: Remove USBInjectAll after creating a proper map, as it is only for debugging.
  4. Verify USB 3.0: Ensure XHCI controllers are enabled in BIOS and USB 3.0 ports are mapped to the correct controller.

Verification

  • All needed USB ports recognise devices.
  • USB 3.0 speeds are achieved on USB 3.0 ports.
  • No kernel panics when plugging/unplugging devices.

Related Searches


Original Question: "Advices for new hackintosch"

'm an happy user of a x99 built hackintosch since 6/7 years using it mainly for photoshop and fcpx ... Using new camera with better resolution and video in ProResRaw , my built start to struggle a bit

I'm thinking of making a new built and seeking for advices for this new built that I want evolutive and last at least as long as my previous built

I'll use a SSD M2 forth Generation so I need at least 2 to 3 SSD M2 PCI x4 slots

then which proc to use , I was thinking about the AMD Ryzen 9 3900xt or the Intel I9 10900k ( don't have the money for AMD threadripper ) if you have better idea I'm really open to it as long as you explain it to me

then which chipset should I use:

for Intel , should I go to Z490 or X299 or W480

For AMD , I think I have only the choice of X570

I always used Gigabyte motherboard so it will be naturally my first choice but again I'm open to any suggestion

I need at least usb 3,1 Gen 2 and TB3 is not necessary but an option and can be add later on with a PCI Card I think

So I'll be pleased o read your opinion and the choices that you'll do for the purpose of this built

thanks in advance

submitted by /u/autantpourmoi
[link] [comments]
Share:

Leave a Reply

Loading comments...