How to Fix AMD B450 MSI Gaming Pro Carbon AC - FENVI T919 (BCM94360CD) Bluetooth does not work
Network issues on Hackintosh or unsupported Macs are typically caused by chipset incompatibility, incorrect kext pairing, or corrupted network preferences.
Quick Fix Steps
- Identify your network chipset: Open System Information > Wi-Fi/Bluetooth or use Hackintool.
- Use the correct kext: For Intel Wi-Fi use AirportItlwm, for Broadcom use BrcmPatchRAM, for Ethernet use IntelMausi or RealtekRTL8111.
- Reset network preferences: Delete /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist and reboot.
- Check privacy settings: System Settings > Privacy > Location Services must be enabled.
Verification
- Wi-Fi connects after reboot.
- Bluetooth pairs and stays connected.
- Location Services works in Maps.
Related Searches
Original Question: "AMD B450 MSI Gaming Pro Carbon AC - FENVI T919 (BCM94360CD) Bluetooth does not work"
Hello greetings to all I hope you are well
First of all he mentioned the BUILD descriptions
Installed Virtually all vanilla
With Images MY POST AMD OSX
Specs 👇
MOBO MSI B450 Pro Carbon AC
CPU Ryzen 5 2600x
Cooler AMD Wraith Prism RGB
GPU RX 580
RAM 8gb x 2 XGP GAMMIX D10
WIFI FENVI T919 BCM94360CD
I have problems with bluetooth, Which is apparently causing conflict with the onboard
The strange thing is that it worked for me the first time I connected the pci dapter (It worked natively and as expected)
This is the last part that I have left to be able to have it fully functional o_O
FENVI T919 BCM94360CD It has no Hardware problem, it was tested on my Win 10 dualboot and it works perfectly
Then reboot and it didn't work again I have tried to remap USB, But without success
OnBoard Bluetooth use USB Port PTR4 BRCM20702 Hub use USB Port PO14 / PO9 (I already tried to change the cable to another usb Connection )
I have already tried: Remove the wireless card onboard ( Disable USB ports PTR4, PTR3, PTR5 etc
But I still don't get this to work properly (I just learned how to perform and not very well)
I've already run out of ideas and what else to do:cry: I hope someone can help me solve this problem
EFI FOLDER [Link removed to comply with Google AdSense and copyright guidelines]
I have used the following guides Guide 1
Removing the XHC0 controller with killXHC0.kext
But I still can't get the bluetooth to work or be recognized
As I had already commented on the PTR4 port It is the one that controls the internal bluetooth I have also disabled the wi-fi card from the bios
Now it tells me as if a Bluetooth device were not present
The USB dongle T919 (BRCM20702 Hub) is connected to the PO14 port
I still can't find How to make it work
It is the only thing that I still do not understand. How is it that the first time I connected it, it worked and now it doesn't
Already tried to remapping, But I think I don't understand it much or I don't do it the right way
[link] [comments]
Post a Comment