How to Fix Success on old build
This mini-guide provides a structural approach to troubleshoot and fix the issue.
Prerequisites
- Confirm your hardware specifications (CPU, GPU, Motherboard).
- Ensure you have a bootable recovery USB and backup your EFI.
Fix Steps
- Verify your network controller model (Intel, Broadcom, Realtek).
- Ensure the correct kext (e.g., AirportItlwm or BrcmPatchRAM) is loaded in your config.
- Clear network interfaces and reset NVRAM if changes don't apply.
Verification
- Reboot and verify if the functionality is restored and stable under typical usage.
Original Question:
 |
Intel i7 2600, 8Gb ddr3 Amd R7 265 2Gb Gigabyte Z77M-D3H (bios v. 15) Audio chip: VT2021, Ethernet chip AR8151 OpenCore 0.6.6 with minimal changes for audio and ethernet, MacPro6,1 smbios Installation method: Installed macOS Catalina in VMware, with a physical drive attached, made an usb drive with opencore, reboot and boot into macOS. for some reason open core won't boot the usb installer but can boot a preinstalled os just fine [link] [comments] |
Post a Comment