How to Fix Geting Bluetooth Fenvi T919 to work on Ryzentosh
This mini-guide provides a structural approach to troubleshoot and fix the issue.
Prerequisites
- Confirm your hardware specifications (CPU, GPU, Motherboard).
- Ensure you have a bootable recovery USB and backup your EFI.
Fix Steps
- Verify your network controller model (Intel, Broadcom, Realtek).
- Ensure the correct kext (e.g., AirportItlwm or BrcmPatchRAM) is loaded in your config.
- Clear network interfaces and reset NVRAM if changes don't apply.
Verification
- Reboot and verify if the functionality is restored and stable under typical usage.
Original Question:
 |
Hi, I've set up my hackintosh a year ago and everything runs smoothly. I recently purchased a Fenvi T919 WiFi and Bluetooth combo and managed to get the wifi working straight out of the box. The bluetooth however doesn't work. I read through a few posts and what I've gathered is I need to map my USB. Someone also mentioned that I need to set the internal usb header as an internal port instead of a USB 2.0 port. ( the card is connected to a usb 2.0 header on my motherboard) However, I tried looking into IOregistry to find my USB2.0 header and I've also downloaded Hackintool but somehow this USB2.0 header does not show up at all. Am I missing some step to get all my USB ports to show up so I can go ahead and map them? It's been more than a year since I've messed around with my hackintosh so I'm pretty out of touch. I've added a screenshot of the USB ports that I can see. PTXH is my PC case's front USB 3 ports and XHC0 is the motherboard. I think these might not be fully mapped too as a few USB ports on them doesn't seem to work. Would appreciate any help! Thanks. [link] [comments] |
Post a Comment