How to Diagnose New project in the air: Mac Pro 2013 After an OCLP macOS Upgrade

How to Diagnose New project in the air: Mac Pro 2013 After an OCLP macOS Upgrade

Battery, Touch ID, trackpad, sleep and charging issues can be software symptoms, but they also expose weak batteries, SMC state or model-specific OCLP limits. After an OCLP update, root patches, SMC/NVRAM state and unsupported hardware drivers can disagree until patches are re-applied cleanly.

Quick Checks

• Backup current state: Save a copy of your working EFI and run a full system backup before changing settings.
• Identify hardware components: Note down your exact CPU, GPU, Wi-Fi card, and motherboard/laptop model.
• Ensure utility alignment: Keep OpenCore, OCLP, and ProperTree updated.

Fix Steps

1. Create a rollback point: Make a Time Machine backup and keep a copy of your last working EFI folder before editing OpenCore, kexts or root patches.
2. Reset low-level state: Reset NVRAM/PRAM and perform the correct SMC reset for your Mac model.
3. Re-apply patches: Open OpenCore Legacy Patcher, run Post-Install Root Patch, reboot, then test again.
4. Check physical health: Review battery cycle count, service status, charger behaviour and Apple Diagnostics before blaming macOS.
5. Test without utilities: Temporarily disable battery limiters, fan tools and login items that may override system behaviour.
6. Compare with a stable OS: If the feature matters, test Monterey/Ventura or the last officially supported release.

Do Not Continue If

• Do not continue if: you do not have a working EFI backup, a Time Machine backup, or another bootable macOS installer.
• Stop and capture evidence: if the machine stops booting, take a photo of the last verbose line before changing more settings.

Verify It Worked

• The setting persists across shutdown and cold boot.
• Battery drain is predictable after two full cycles.
• Sleep/wake works without requiring a forced reboot.
• No new root patches are pending in OCLP.

Rollback

• Undo the latest macOS update if the feature is essential.
• Restore a Time Machine snapshot from before the patch.
• Keep the machine on the most stable macOS version for that model.

Next Action

• Test now: reboot twice, reproduce the original problem, and confirm whether the same symptom returns.
• If it still fails: record the Mac model, macOS build, OpenCore or OCLP version, GPU, Wi-Fi/Bluetooth chipset, and the last visible error.
• Read next: use the related searches below for the nearest OpenCore or OCLP fix before making another change.

Related iATKOS Searches

• OpenCore · OCLP · EFI · kexts · config.plist · macOS troubleshooting

Original Question: "New project in the air: Mac Pro 2013"

Hey guys, Just got on a lucky auction here below bad guy, never had the opportunity to “play with” until now: 3,0 GHz 8-Core Intel Xeon E5 32GB DDR3 ECC RAM Dual AMD FirePro D700 mit je 6 GB VRAM 256 GB SSD Looking forward to start a new project, bring it to Sequoia. Unless someone has valid arguments to pickup a different OS… submitted by /u/LukeDuke74 [link] [comments]

Alternative / Duplicate Questions Resolved:

• "new project :)":
  

  Just recently picked up a Dell Latitude 5490

  I'm wondering if there are any of you out there with a fully working EFI for a more recent version of MacOS. Also, any useful tips would help. I will be in the depths of the dortania guide. cheers.

  specs:

  CPU: intel i5-8350U

  RAM: SODIMM DDR4 16GB @ 2400MHz (2x8GB)

  STORAGE: 1TB Curcial P3 2280 nvme slot

  CONNECTIONS: bluetooth+wifi (Intel Dual Band Wireless-AC 8265) and Intel ethernet 1219-LM

  3x USB 3.1 Gen1 (one with PowerShare) - DisplayPort over USB Type-C(optional Thunderbolt 3(1)

  submitted by /u/xxWONTSTOPxx
  [link] [comments]